R2-60 R2-60
4.9 63

Measuring VSWR R2-60 (R2 60, R260)

For measuring and reproduction on the CRT screen and VSWR frequency characteristics of the attenuation elements of the waveguide channels.
Operating frequency range from 6.85 meter to 9.93 GHz, the cross section of the waveguide tract 28,5 x12, 6 mm.
Operating frequency range overlaps two ranges: from 6.85 to 8.24 GHz and 8.24 to 9.93 GHz.
R2-60 meter image.

Price:

on request

 

Product information updated 10 December 2024.

Found cheaper?

Let us know. Our price is the best. 

Warranty:

12 months.

Warranty extension up to 5 years. 

Terms of delivery:

To all regions of the country, international delivery. 

print

Product information updated 10 December 2024.

Found cheaper?

Let us know. Our price is the best. 

Warranty:

12 months.

Warranty extension up to 5 years. 

Terms of delivery:

To all regions of the country, international delivery. 

print

Technical characteristics

Measuring VSWR R2-60 (R2 60, R260)

For measuring and reproduction on the CRT screen and VSWR frequency characteristics of the attenuation elements of the waveguide channels.
Operating frequency range from 6.85 meter to 9.93 GHz, the cross section of the waveguide tract 28,5 x12, 6 mm.
Operating frequency range overlaps two ranges: from 6.85 to 8.24 GHz and 8.24 to 9.93 GHz.

Measuring VSWR R2-60 panoramic intended for measuring and reproduction on the CRT screen and VSWR frequency characteristics of attenuation elements of the waveguide channels.
Measuring VSWR R2-60 may be used in laboratory and plant conditions, as well as calibration and repair shops bodies.
Operating conditions measuring VSWR R2-60 instruments :
- Ambient temperature from 278 to 313 K (5 to 40 ° C);
- 95% relative humidity at a temperature of 303 K (30 ° C);
- Low atmospheric pressure 62 kPa;
- Mains voltage of 220 ± 22V at 50 ± 0.5 Hz non-operating non-operating meter;
- Minimum temperature of 223 K (-50 ° C);
- The maximum temperature of 333 K (+60 ° C).
Technical data
Operating frequency range from 6.85 meter to 9.93 GHz, the cross section of the waveguide tract 28,5 x12, 6 mm.
Note. Operating frequency range overlaps two ranges: from 6.85 to 8.24 GHz and 8.24 to 9.93 GHz.
Measurement range of VSWR and attenuation match and the valid measurement errors VSWR (bKstU) and attenuation (ΔA) of passive two-ports with KstU ≤ 1 and 2 do not exceed the values ​​given in Table 1.
Note. The uneven level of calibration measurements and determination of measurement error SWR and attenuation should be no more than ± 0,3 dB.
 
Table 1
Range of measurement
VSWR
1,05-5,00
Attenuation in dB
0-35
Maximum permissible error
bKstU%
On fiksirova-
constant frequency
KstU ≤ 2,0
± 4KstU
KstU from 2.0 to 5.0

4·КстU/(100-(±4·КстU)· КстU/(КстU+1))·100

In the frequency range
KstU ≤ 2,0
± 5KstU
KstU from 2.0 to 5.0

5·КстU/(100-(±5·КстU)· КстU/(КстU+1))·100

ΔA, dB
On fiksirova-
constant frequency
± (0,05 Ax 0.3)
In the frequency range
± (0,05 Ax 0.5)

The Meter provides the following modes of frequency tuning:
- Manual frequency tuning;
- Manual sweep;
- Automatic sweep with a duration period of 0.08 s, 1 s, 10 s.
- A one-time sweep with a duration period of 40s and manual start.
The band rocking device measuring VSWR R2-60:
- Max - full sub-band frequencies;
- Minimum - no more than 83 MHz sub-band-824GGts 6.85 GHz and 120 MHz sub-band at 8.24 GHz to 9 93GGts.
The basic error of frequency bands and frequency limits swing is ± 240KGts.
On the CRT display shows two frequency labels. Amplitude frequency tags adjustable from 0 to 5 mm.
The meter meets its specifications within the established norms after samoprogreva time of 15 minutes.
The meter retains its specifications within the established norms when powered from the mains alternating current voltage of 220 ± 22V, ± 0,5 at 50 Hz and harmonic content up to 5%.
The power consumed by the device measuring VSWR R2-60 from the network at the rated voltage does not exceed 180VA.
Notes:
1. Power consumed by the sweep - 100 VA.
2. Power consumed by the display - 80 VA.
Measuring VSWR R2-60 allows for continuous operation in the operating conditions for 8 hours, while maintaining the characteristics in a certain limit.
Mean time between failures meter no less than 1500 hours.
Lifetime meter is not less than 5 years.
Technical capacity of at least 5000 hours.
Dimensions, not more than:
- Sweep - 488x475x173 mm;
- Indicator - 484x492x177 mm;
in the packing box:
- Sweep - 580x545x355 mm;
- RFU - 516h493x206 mm.
Rate the product: R2-60
Number of views: 3281
Product rating: 4.9
Number of grades: 507
* rating and all product statistics are updated once a month; information is current as of 21 December 2024

Photos: R2-60

R2-60 meter image.

R2-60 meter image.

R2-60 front view.

R2-60 front view.

R2-60 side view.

R2-60 side view.

R2-60 rear view.

R2-60 rear view.

R2-60 overhead view.

R2-60 overhead view.

R2-60 bottom view.

R2-60 bottom view.

Leading online store Zapadpribor - a huge selection of measuring equipment for the best value and quality. So you can buy inexpensive devices, we monitor competitors' prices and are always ready to offer a lower price. We only sell quality products at the best prices. On our site you can buy cheaply as the latest innovations and proven equipment from the best manufacturers.

The site includes a special offer «buy at the best price» - if other Internet resources (bulletin board, forum or announcement of another online service) in products presented on our site, the lower price, we will sell it to you even cheaper! Buyers also additional discount for leaving a review or photo of use of our products.

In the price list contains not the whole range of products offered. Prices of goods, not included in the price list can learn to contact the manager. Also, our managers You can get detailed information about how cheap and profitable to buy instrumentation wholesale and retail. Telephone and e-mail for advice on the purchase , delivery or receipt are shown on the description of the goods. We have the most qualified staff, quality equipment and the best price.

 

Online store Zapadpribor - the official manufacturer's dealer test equipment. Our goal - selling high quality goods with best price offer and service to our customers. Our store can not only sell you the necessary instrument, but also offer additional services to its calibration, repair and installation. That you have a pleasant experience when shopping on our site, we have provided special gifts guaranteed to the most popular products.

 

We offer fast international shipping to almost every country in the world: Australia, Austria, Azerbaijan, Albania, Algeria, Anguilla, Angola, Antigua and Barbuda, Argentina, Aruba,  Bahamas, Bangladesh, Barbados, Bahrain, Belize, Belgium, Benin, Bermuda, Bulgaria, Bolivia, Bonaire, Sint-E. and Saba, Bosnia and Herzegovina, Botswana, Brazil, British Virgin Islands, Brunei Darussalam, Burkina Faso, Burundi, Bhutan, VietNam, Vanuatu, Vatican City, Venezuela, Armenia, Gabon, Guyana, Haiti, Gamia, Gambia, Ghana, Guatemala, Guinea, Gibraltar, Honduras, Hong Kong, Grenada, Greenland, Greece, Georgia, Denmark, Democratic Republic of the Congo, Jersey, Djibouti, Dominica, Dominican Republic, Ecuador, Eswatine, Estonia, Ethiopia, Egypt, Zambia, Zimbabwe, Jordan Indonesia, Ireland, Iceland, Spain, Italy, Cape Verde, Kazakhstan, Cayman Islands, Cambodia, Cameroon, Canada, Qatar, Kenya, Kyrgyzstan, China, Cyprus, Kiribati, Colombia, Comoros, Congo, Korea (Rep.), Costa Rica, Kot-d'Ivoire, Cuba, Kuwait, Curacao, Laos, Latvia, Lesotho, Lithuania, Liberia, Lebanon, Libya, Liechtenstein, Luxembourg, Myanmar, Mauritius, Mauritania, Madagascar, Macao, Malawi, Malaysia, Mali, Maldives, Malta, Morocco, Mexico, Mozambique, Moldova, Monaco, Monaco, Namibia, Nauru, Nepal, Niger, Nigeria, Netherlands, Germany, New Zealand, New Caledonia, Norway, UAE, Oman, Cook Islands, Pakistan, Palestine, Panama, Papua New Guinea, Paraguay, Peru, South Africa, Poland, Portugal, Republic of Chad, Rwanda, Romania, El Salvador, Samoa, San Marino, Saudi Arabia, Swaziland, Seychelles, Senegal, Saint Vincent and the Grenadines, Saint Kitts and Nevis, Saint Lucia, Serbia, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, United Kingdom of Great Britain and Northern Ireland, Sudan, Suriname, East Timor (Timor-Leste), USA, Sierra Leone, Tajikistan, Taiwan, Thailand, Tanzania (United Republic of), Togo, Tonga, Trinidad and Tobago, Tuvalu, Tunisia, Turkey, Turkmenistan, Uganda, Hungary, Uzbekistan, Uruguay, Faroe Islands, Fiji, Philippines, Finland, France, French Polynesia, Croatia, Central African Republic, Czech Republic, Chile, Montenegro, Switzerland, Sweden, Sri Lanka, Jamaica, Japan.

We also provide such metrological procedure: calibration, tare, graduated, testing of measuring instruments.

The online store takes an active part in such procedures as electronic bidding, tender, auction.

If there is no site in the descriptive information you need on the device you can always turn to us for help. Our qualified managers will update for you on the technical characteristics of the device from its technical documentation: user manual, certificate, form, operating instructions, diagram. If necessary, we will take a photo of your device, or a device stand. You can leave feedback on the unit purchased from us, the meter, the device, indicator, or product. Your review for your approval will be published on the site without contact information.

 

Description of the instruments taken from the technical documentation or technical literature. Most pictures of products made directly by our experts prior to shipment of goods. In the description of the device provided the main technical characteristics of the instrument: nominal measuring range, accuracy class, scale, supply voltage, size (size), weight. If the site you see the discrepancy device name (model) specifications, photo or documents attached - let us know - you will get a useful gift with-selling device.

 

While the need to clarify the overall weight and size or the size of the individual meter you can in our service center. If you need our engineers will help you choose the most complete analog or a suitable replacement for the device you are interested. All counterparts and replacement will be tested in one of our laboratories with the full compliance to your requirements.

In the technical documentation for each device or product, information is provided on the list and amount of precious metals content. The documentation gives the exact weight in grams of precious metals: Au gold, palladium Pd, platinum Pt, silver Ag, tantalum Ta and other platinum group metals (PGM) per unit item. These precious metals are found in nature in very limited quantities and therefore have such a high price.

On our website you can familiarize yourself with the technical characteristics of devices and obtain information on the content of precious metals in devices and radio components manufactured in the USSR. We draw your attention to the fact that often the actual content of precious metals differs by 10-25% from the reference one in a smaller direction! The price of precious metals will depend on their value and mass in grams.

All text and graphic information on the site is informative. The color, shade, material, geometric dimensions, weight, content, delivery set and other parameters of the goods presented on the site may vary depending on the batch of production and year of manufacture. Check with the sales department for more information.

 

If you can make repairs to the device yourself, our engineers can provide you with a complete set of necessary technical documentation: circuit diagram TO, ER, FD, PS. We also have an extensive database of technical and metrological documents: technical specifications (TS), the terms of reference (TOR), GOST (DSTU), the industry standard (OST) test procedure, the method of certification, verification scheme for more than 3,500 types of measuring equipment from the manufacturer this equipment. From the site you can download all the necessary software (the software driver) is required for the product purchased.

We carries out repairs and maintenance of measuring equipment in more than 75 different factories of the former Soviet Union and CIS.

We also have a library of legal documents that are related to our field of activity: the law, code, ordinance, decree, temporary position.