KM140M KM140M
4.9 63

Automatic showing bridge KM140M (KM 140M, KM-140M, km140m, km 140m, km-140m)
For temperature, salinity and the electrical resistance of the water, as well as to signal when the measured value deviates from the set value.

Control and measuring devices
secondary devices - recorders (KP140, KSD2, KSM2, RP160 and others)
KM140M bridge image.

Price:

on request

 

Product information updated 08 December 2024.

Found cheaper?

Let us know. Our price is the best. 

Warranty:

12 months.

Warranty extension up to 5 years. 

Terms of delivery:

To all regions of the country, international delivery. 

print

Product information updated 08 December 2024.

Found cheaper?

Let us know. Our price is the best. 

Warranty:

12 months.

Warranty extension up to 5 years. 

Terms of delivery:

To all regions of the country, international delivery. 

print

Technical characteristics

Automatic showing bridge KM140M (KM 140M, KM-140M, km140m, km 140m, km-140m)
Designed to measure temperature, salinity or electrical resistivity of water, as well as for signaling at a deviation of the measured values of the specified value.

Automatic showing bridges KM140M designed to measure temperature, salinity or electrical resistivity of water, as well as for signaling at a deviation of the measured values of the specified value.
Designed for installation and operation in special kits and analyzers are used to measure the ratio of two-phase AC voltage characterizing the content of the analyte in the test gas mixture.
The device has a device to enable (disable) signal when a deviation from the nominal value of the parameter, and the device issuing voltage 0-1V, the index is proportional to the deviation from the initial unit of the scale.

The main technical characteristics of the devices KM140M
Main technical data
 
1. The basic error of the device indicated, expressed as a percentage of the fiducial value, does not exceed the allowed values:  
  • for KM140M-101 - 102
± 0,5
  • for KM140M-104 - 105
± 1,0;
  • for KM140M-106 - 107
± 1,0
2. The variation of the limit, expressed in percent of the fiducial value should not exceed  
  • for KM140M-101 - 102
0.25
  • for KM140M-104 - 105
0.5
  • for KM140M-106 - 107
1.0
3. The error on the signaling channel, expressed as a percentage of the fiducial value, does not exceed the allowable values ​​equal ± 1,5
4. The basic error of the instrument via a potentiometer device caused by non-linear slide wire, and expressed as a percentage of the fiducial value, does not exceed the allowable values equal  
  • for KM140M-102
1.0
  • for KM140M-105
1.5
  • for KM140M-107
1.5
5. Power supply from the AC voltage, V 220 or 127 +22 -33 +13 -19
6. Frequency, Hz 50 ± 1
7. The travel time index is less than full scale, sec 5
8. Power consumption at rated voltage, VA, no more 19
9. Weight, kg, not more 8.2
10. Overall dimensions, mm
depth behind the shield
140x140x405
372.5
11. Devices operate stably under the influence of vibration loads - in the frequency range from 5 Hz to 100 Hz with an acceleration
Under the influence of shock pulse repetition rate in the range of 40-180 per min., The total number of strokes at least 1000, the maximum acceleration shock
9.8 m / s 2

100 m / s 2
12. The instruments are played according to GOST 12997-84 B4

 

Execution of instruments KM140M
TU 25-0521.113-85

 

Number p / p Device name Cipher Type
regulatory (signaliz.) devices
Additional
device
Note
1 Most balanced AC showing temperature measurement KM140M-101 (KM140M-001-OM4) Three-Position - TU 25-05.2365-78 (TU25-05-AD1-56-92
2 KM140M-102 (KM140M-002-OM4) Rheostat
3 Most balanced AC showing for measuring salinity KM140M-104 (KM140M-004-OM4) - TU 25-05.2366-78
(TU25-05-AD1-57-92)
4 KM 140-105
(KM140M-005-OM4)
Rheostat
5 Most balanced AC showing for measuring electrical resistivity of water KM 140 - 106
(KM140M-005-OM4)
- TU 25-05.2369-78
(TU25-05-AD1-58-92)
6 KM 140 - 107
(KM140M-007-OM4)
Rheostat

   

The nominal static characteristics
    conversion and the limits of the measurement devices KM140M-101, 102

 

Type termopreobrzovatelya resistance Symbol nominal static characteristic transformation The measuring range ° C
from
to
1 TSP Pt10 0 300
0 400
0 500
0 650
300 650
2 TSP Pt100 -200 70
-200 50
120 30
-90 50
-70 180
-25 25
0 50
0 100
0 150
0 200
0 300
0 400
0 500
200 500
3 P150 -200 -70
-20 30
-70 180
-50 50
-50 100
0 50
0 100
0 150
0 200
0 300
0 400
0 500
200 500
4 TCM Cu100 -50 0
-50 50
-50 100
-25 25
0 25
0 50
0 100
0 150
0 180
50 100
5 Cu50 -50 0
-50 50
-50 100
0 50
0 100
0 150
0 60.4
0 180
50 100
Rate the product: KM140M
Number of views: 1957
Product rating: 4.8
Number of grades: 439
* rating and all product statistics are updated once a month; information is current as of 22 December 2024

Photos KM140M

KM140M bridge image.

KM140M bridge image.

KM140M front view.

KM140M front view.

KM140M side view.

KM140M side view.

KM140M rear view.

KM140M rear view.

KM140M overhead view.

KM140M overhead view.

KM140M bottom view.

KM140M bottom view.

Leading online store Zapadpribor - a huge selection of measuring equipment for the best value and quality. So you can buy inexpensive devices, we monitor competitors' prices and are always ready to offer a lower price. We only sell quality products at the best prices. On our site you can buy cheaply as the latest innovations and proven equipment from the best manufacturers.

The site includes a special offer «buy at the best price» - if other Internet resources (bulletin board, forum or announcement of another online service) in products presented on our site, the lower price, we will sell it to you even cheaper! Buyers also additional discount for leaving a review or photo of use of our products.

In the price list contains not the whole range of products offered. Prices of goods, not included in the price list can learn to contact the manager. Also, our managers You can get detailed information about how cheap and profitable to buy instrumentation wholesale and retail. Telephone and e-mail for advice on the purchase , delivery or receipt are shown on the description of the goods. We have the most qualified staff, quality equipment and the best price.

 

Online store Zapadpribor - the official manufacturer's dealer test equipment. Our goal - selling high quality goods with best price offer and service to our customers. Our store can not only sell you the necessary instrument, but also offer additional services to its calibration, repair and installation. That you have a pleasant experience when shopping on our site, we have provided special gifts guaranteed to the most popular products.

 

We offer fast international shipping to almost every country in the world: Australia, Austria, Azerbaijan, Albania, Algeria, Anguilla, Angola, Antigua and Barbuda, Argentina, Aruba,  Bahamas, Bangladesh, Barbados, Bahrain, Belize, Belgium, Benin, Bermuda, Bulgaria, Bolivia, Bonaire, Sint-E. and Saba, Bosnia and Herzegovina, Botswana, Brazil, British Virgin Islands, Brunei Darussalam, Burkina Faso, Burundi, Bhutan, VietNam, Vanuatu, Vatican City, Venezuela, Armenia, Gabon, Guyana, Haiti, Gamia, Gambia, Ghana, Guatemala, Guinea, Gibraltar, Honduras, Hong Kong, Grenada, Greenland, Greece, Georgia, Denmark, Democratic Republic of the Congo, Jersey, Djibouti, Dominica, Dominican Republic, Ecuador, Eswatine, Estonia, Ethiopia, Egypt, Zambia, Zimbabwe, Jordan Indonesia, Ireland, Iceland, Spain, Italy, Cape Verde, Kazakhstan, Cayman Islands, Cambodia, Cameroon, Canada, Qatar, Kenya, Kyrgyzstan, China, Cyprus, Kiribati, Colombia, Comoros, Congo, Korea (Rep.), Costa Rica, Kot-d'Ivoire, Cuba, Kuwait, Curacao, Laos, Latvia, Lesotho, Lithuania, Liberia, Lebanon, Libya, Liechtenstein, Luxembourg, Myanmar, Mauritius, Mauritania, Madagascar, Macao, Malawi, Malaysia, Mali, Maldives, Malta, Morocco, Mexico, Mozambique, Moldova, Monaco, Monaco, Namibia, Nauru, Nepal, Niger, Nigeria, Netherlands, Germany, New Zealand, New Caledonia, Norway, UAE, Oman, Cook Islands, Pakistan, Palestine, Panama, Papua New Guinea, Paraguay, Peru, South Africa, Poland, Portugal, Republic of Chad, Rwanda, Romania, El Salvador, Samoa, San Marino, Saudi Arabia, Swaziland, Seychelles, Senegal, Saint Vincent and the Grenadines, Saint Kitts and Nevis, Saint Lucia, Serbia, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, United Kingdom of Great Britain and Northern Ireland, Sudan, Suriname, East Timor (Timor-Leste), USA, Sierra Leone, Tajikistan, Taiwan, Thailand, Tanzania (United Republic of), Togo, Tonga, Trinidad and Tobago, Tuvalu, Tunisia, Turkey, Turkmenistan, Uganda, Hungary, Uzbekistan, Uruguay, Faroe Islands, Fiji, Philippines, Finland, France, French Polynesia, Croatia, Central African Republic, Czech Republic, Chile, Montenegro, Switzerland, Sweden, Sri Lanka, Jamaica, Japan.

We also provide such metrological procedure: calibration, tare, graduated, testing of measuring instruments.

The online store takes an active part in such procedures as electronic bidding, tender, auction.

If there is no site in the descriptive information you need on the device you can always turn to us for help. Our qualified managers will update for you on the technical characteristics of the device from its technical documentation: user manual, certificate, form, operating instructions, diagram. If necessary, we will take a photo of your device, or a device stand. You can leave feedback on the unit purchased from us, the meter, the device, indicator, or product. Your review for your approval will be published on the site without contact information.

 

Description of the instruments taken from the technical documentation or technical literature. Most pictures of products made directly by our experts prior to shipment of goods. In the description of the device provided the main technical characteristics of the instrument: nominal measuring range, accuracy class, scale, supply voltage, size (size), weight. If the site you see the discrepancy device name (model) specifications, photo or documents attached - let us know - you will get a useful gift with-selling device.

 

While the need to clarify the overall weight and size or the size of the individual meter you can in our service center. If you need our engineers will help you choose the most complete analog or a suitable replacement for the device you are interested. All counterparts and replacement will be tested in one of our laboratories with the full compliance to your requirements.

In the technical documentation for each device or product, information is provided on the list and amount of precious metals content. The documentation gives the exact weight in grams of precious metals: Au gold, palladium Pd, platinum Pt, silver Ag, tantalum Ta and other platinum group metals (PGM) per unit item. These precious metals are found in nature in very limited quantities and therefore have such a high price.

On our website you can familiarize yourself with the technical characteristics of devices and obtain information on the content of precious metals in devices and radio components manufactured in the USSR. We draw your attention to the fact that often the actual content of precious metals differs by 10-25% from the reference one in a smaller direction! The price of precious metals will depend on their value and mass in grams.

All text and graphic information on the site is informative. The color, shade, material, geometric dimensions, weight, content, delivery set and other parameters of the goods presented on the site may vary depending on the batch of production and year of manufacture. Check with the sales department for more information.

 

If you can make repairs to the device yourself, our engineers can provide you with a complete set of necessary technical documentation: circuit diagram TO, ER, FD, PS. We also have an extensive database of technical and metrological documents: technical specifications (TS), the terms of reference (TOR), GOST (DSTU), the industry standard (OST) test procedure, the method of certification, verification scheme for more than 3,500 types of measuring equipment from the manufacturer this equipment. From the site you can download all the necessary software (the software driver) is required for the product purchased.

We carries out repairs and maintenance of measuring equipment in more than 75 different factories of the former Soviet Union and CIS.

We also have a library of legal documents that are related to our field of activity: the law, code, ordinance, decree, temporary position.