Products catalog
Price:
on request
Product information updated 08 December 2024.
Found cheaper?
Let us know. Our price is the best.
Warranty:
12 months.
Warranty extension up to 5 years.
Terms of delivery:
To all regions of the country, international delivery.
Product information updated 08 December 2024.
Found cheaper?
Let us know. Our price is the best.
Warranty:
12 months.
Warranty extension up to 5 years.
Terms of delivery:
To all regions of the country, international delivery.
Technical characteristics
Generator Sweep GKCH53 (sweep-53, sweep 53)
Generator Sweep GKCH53 intended for use as a source of microwave signal in the panoramic meter voltage standing wave ratio (VSWR) R2.
Technical characteristics of the devices Generators Sweep GKCH53:
Ambient temperature - from 278K to 313K (5 º C to 40 ° C);
Relative humidity - up to 95% at 303K (30 ° C);
Frequency band instrument generator Sweep GKCH53 - 2.0 GHz-4 0GGts;
Power supply - 220V ± 22V, 50Hz ± 0,5 Hz;
Maximum permissible error of the frequency band and cutoff frequencies of oscillation does not exceed ± 0,02 f, where f - the maximum working frequency sub-band;
Short-term frequency instability of the instrument generator Sweep GKCH53 RPCH mode for 5 minutes and after 5 minutes of tuning the frequency in normal conditions does not exceed 1 ∙ 10-3f;
The width of the output signal in CW mode and RPCH based parasitic frequency deviation at the level of-10dB from the main signal level does not exceed 0,05 f, where f - the minimum band sweep;
Unit generator Sweep GKCH53 provides the following modes of frequency hopping:
- Manual frequency tuning;
- Manual frequency agility;
- Periodic sweep;
- Single sweep with a hand launch;
- Tuning of the frequency of the external power supply;
Duration of periods of automatic sweep of 0.08 s, 1s, 10s and 40s;
Non-linearity of frequency tuning to the maximum band swing does not exceed ± 5% of the maximum swing band;
Output power unit generator Sweep GKCH53 at work on a matched load - not less than 1 mW;
ARM System accuracy with respect to the frequency response of the external sensor is less than ± 0,3 dB;
Sensitivity of AWP for the input - no worse than 5mV;
The device generator Sweep GKCH53 provides:
a) in the continuous generation (NG);
b) using the internal amplitude modulation (AM) with a frequency of 100kHz meander ± 1 kHz and a modulation depth of not less than 15 dB;
The amplitude of the applied voltage for tuning the frequency of the maximum band swing to range from 0V to +10 V;
The radiation level of microwave power at a distance of 1m from the unit generator Sweep GKCH53 generated during its operation does not exceed 1 ∙ 109Vt/sm2;
Options auxiliary outputs to loads of 10K:
a) The amplitude of the voltage sweep - not less than 5 V;
b) amplitude videoimpulsnoy label - at least -0.7 V;
c) the amplitude of the voltage square wave 100kHz - not less than 0.5;
d) the amplitude control voltage - no less than-5V;
e) pulse amplitude blanking reverse sweep - not less than-5V;
High-frequency output generator unit Sweep GKCH53 - coaxial with impedance 50 ohms, and section 7 / 3, 04mm;
Electrical isolation network plug relative to the body can withstand without breakdown test voltage 1500V to 900V under normal conditions and under high humidity;
Insulation resistance of this circuit device generator Sweep GKCH53 relative to the body - at least 20 MW, with high humidity - at least 2 MW, at an elevated temperature - not less than 5 megohms;
The device provides its specifications within established norms of time after setting the mode of 15 minutes;
The device generator Sweep GKCH53 retains its specifications within established norms for their nutrition from AC 220V ± 22V, 50Hz ± 0,5 Hz and harmonic content up to 5%;
The power consumed by the device on the network at a nominal supply voltage does not exceed 100 V ∙ A;
The device generator Sweep GKCH53 allows continuous operation in the working conditions for 8 hours while maintaining their performance within the established norms;
Continuous operation time does not include the time required to establish the operating mode;
Overall dimensions generator Sweep GKCH53 - 490x475x175mm;
Weight - 90kg.
Photos: ГКЧ53
ГКЧ53 generator image.
ГКЧ53 front view.
ГКЧ53 side view.
ГКЧ53 rear view.
ГКЧ53 overhead view.
ГКЧ53 bottom view.
Leading online store Zapadpribor - a huge selection of measuring equipment for the best value and quality. So you can buy inexpensive devices, we monitor competitors' prices and are always ready to offer a lower price. We only sell quality products at the best prices. On our site you can buy cheaply as the latest innovations and proven equipment from the best manufacturers.
The site includes a special offer «buy at the best price» - if other Internet resources (bulletin board, forum or announcement of another online service) in products presented on our site, the lower price, we will sell it to you even cheaper! Buyers also additional discount for leaving a review or photo of use of our products.
In the price list contains not the whole range of products offered. Prices of goods, not included in the price list can learn to contact the manager. Also, our managers You can get detailed information about how cheap and profitable to buy instrumentation wholesale and retail. Telephone and e-mail for advice on the purchase , delivery or receipt are shown on the description of the goods. We have the most qualified staff, quality equipment and the best price.
Online store Zapadpribor - the official manufacturer's dealer test equipment. Our goal - selling high quality goods with best price offer and service to our customers. Our store can not only sell you the necessary instrument, but also offer additional services to its calibration, repair and installation. That you have a pleasant experience when shopping on our site, we have provided special gifts guaranteed to the most popular products.
We offer fast international shipping to almost every country in the world: Australia, Austria, Azerbaijan, Albania, Algeria, Anguilla, Angola, Antigua and Barbuda, Argentina, Aruba, Bahamas, Bangladesh, Barbados, Bahrain, Belize, Belgium, Benin, Bermuda, Bulgaria, Bolivia, Bonaire, Sint-E. and Saba, Bosnia and Herzegovina, Botswana, Brazil, British Virgin Islands, Brunei Darussalam, Burkina Faso, Burundi, Bhutan, VietNam, Vanuatu, Vatican City, Venezuela, Armenia, Gabon, Guyana, Haiti, Gamia, Gambia, Ghana, Guatemala, Guinea, Gibraltar, Honduras, Hong Kong, Grenada, Greenland, Greece, Georgia, Denmark, Democratic Republic of the Congo, Jersey, Djibouti, Dominica, Dominican Republic, Ecuador, Eswatine, Estonia, Ethiopia, Egypt, Zambia, Zimbabwe, Jordan Indonesia, Ireland, Iceland, Spain, Italy, Cape Verde, Kazakhstan, Cayman Islands, Cambodia, Cameroon, Canada, Qatar, Kenya, Kyrgyzstan, China, Cyprus, Kiribati, Colombia, Comoros, Congo, Korea (Rep.), Costa Rica, Kot-d'Ivoire, Cuba, Kuwait, Curacao, Laos, Latvia, Lesotho, Lithuania, Liberia, Lebanon, Libya, Liechtenstein, Luxembourg, Myanmar, Mauritius, Mauritania, Madagascar, Macao, Malawi, Malaysia, Mali, Maldives, Malta, Morocco, Mexico, Mozambique, Moldova, Monaco, Monaco, Namibia, Nauru, Nepal, Niger, Nigeria, Netherlands, Germany, New Zealand, New Caledonia, Norway, UAE, Oman, Cook Islands, Pakistan, Palestine, Panama, Papua New Guinea, Paraguay, Peru, South Africa, Poland, Portugal, Republic of Chad, Rwanda, Romania, El Salvador, Samoa, San Marino, Saudi Arabia, Swaziland, Seychelles, Senegal, Saint Vincent and the Grenadines, Saint Kitts and Nevis, Saint Lucia, Serbia, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, United Kingdom of Great Britain and Northern Ireland, Sudan, Suriname, East Timor (Timor-Leste), USA, Sierra Leone, Tajikistan, Taiwan, Thailand, Tanzania (United Republic of), Togo, Tonga, Trinidad and Tobago, Tuvalu, Tunisia, Turkey, Turkmenistan, Uganda, Hungary, Uzbekistan, Uruguay, Faroe Islands, Fiji, Philippines, Finland, France, French Polynesia, Croatia, Central African Republic, Czech Republic, Chile, Montenegro, Switzerland, Sweden, Sri Lanka, Jamaica, Japan.
We also provide such metrological procedure: calibration, tare, graduated, testing of measuring instruments.
The online store takes an active part in such procedures as electronic bidding, tender, auction.
If there is no site in the descriptive information you need on the device you can always turn to us for help. Our qualified managers will update for you on the technical characteristics of the device from its technical documentation: user manual, certificate, form, operating instructions, diagram. If necessary, we will take a photo of your device, or a device stand. You can leave feedback on the unit purchased from us, the meter, the device, indicator, or product. Your review for your approval will be published on the site without contact information.
Description of the instruments taken from the technical documentation or technical literature. Most pictures of products made directly by our experts prior to shipment of goods. In the description of the device provided the main technical characteristics of the instrument: nominal measuring range, accuracy class, scale, supply voltage, size (size), weight. If the site you see the discrepancy device name (model) specifications, photo or documents attached - let us know - you will get a useful gift with-selling device.
While the need to clarify the overall weight and size or the size of the individual meter you can in our service center. If you need our engineers will help you choose the most complete analog or a suitable replacement for the device you are interested. All counterparts and replacement will be tested in one of our laboratories with the full compliance to your requirements.
In the technical documentation for each device or product, information is provided on the list and amount of precious metals content. The documentation gives the exact weight in grams of precious metals: Au gold, palladium Pd, platinum Pt, silver Ag, tantalum Ta and other platinum group metals (PGM) per unit item. These precious metals are found in nature in very limited quantities and therefore have such a high price.
On our website you can familiarize yourself with the technical characteristics of devices and obtain information on the content of precious metals in devices and radio components manufactured in the USSR. We draw your attention to the fact that often the actual content of precious metals differs by 10-25% from the reference one in a smaller direction! The price of precious metals will depend on their value and mass in grams.
All text and graphic information on the site is informative. The color, shade, material, geometric dimensions, weight, content, delivery set and other parameters of the goods presented on the site may vary depending on the batch of production and year of manufacture. Check with the sales department for more information.
If you can make repairs to the device yourself, our engineers can provide you with a complete set of necessary technical documentation: circuit diagram TO, ER, FD, PS. We also have an extensive database of technical and metrological documents: technical specifications (TS), the terms of reference (TOR), GOST (DSTU), the industry standard (OST) test procedure, the method of certification, verification scheme for more than 3,500 types of measuring equipment from the manufacturer this equipment. From the site you can download all the necessary software (the software driver) is required for the product purchased.
We carries out repairs and maintenance of measuring equipment in more than 75 different factories of the former Soviet Union and CIS.
We also have a library of legal documents that are related to our field of activity: the law, code, ordinance, decree, temporary position.