G6-37 G6-37
4.9 63

Test pattern generators G6-37 (G637, G6 37)

Has a main output, the output clock and output clock phase of the manipulator;
Frequency - 0.001 Hz-20MHz;
The basic error of frequency does not exceed:
- ± 2% of the maximum frequency subband in the frequency range 0.1 Hz to 100 kHz;
- ± 3% of the maximum frequency subband in the frequency ranges 0 0.001 Hz, 1 Hz and 100 kHz-1000 kHz;
- ± 5% of the maximum frequency sub-band in the frequency range 1 MHz to 10 MHz;
- ± 10% of the maximum frequency subband in the frequency 2 MHz-20 MHz.

Products catalog

Radiometric devices
generators (G2-, G3-, G4-, G5-, G6-, GK4-, GKCh, RG4-, Ya2R-, Ya5Kh-, Ya8Kh-, TR- and others)
signal generators of the special form (G6- and others)
G6-37 device image.

Price:

on request

 

Get price

Product information updated 09 December 2024.

Found cheaper?

Let us know. Our price is the best. 

Warranty:

12 months.

Warranty extension up to 5 years. 

Terms of delivery:

To all regions of the country, international delivery. 

print

Product information updated 09 December 2024.

Found cheaper?

Let us know. Our price is the best. 

Warranty:

12 months.

Warranty extension up to 5 years. 

Terms of delivery:

To all regions of the country, international delivery. 

print

Accessories, inexpensive analogues and other devices in stock(6)

Technical characteristics

Test pattern generators G6-37 (G637, G6 37)

Test pattern generators G6-37 has a main output, the output clock and clock output phase of the manipulator.
On the main output signal having one of the following forms: sine, triangle, square, ramp, pulse.
Technical characteristics of the devices test pattern generators G6-37:
On the way out "L" clock has the following parameters:
- Polarity - positive;
- Amplitude - not less than 2.5 V at 50 ohms ± 0,5 Ohm;
- Rise time - less than 20ns;
- The duration of the pulse at the 0.5 level - less than 70ns;
On the way out "P" phase clock signal handler has the following parameters:
- Polarity - positive;
- Amplitude - not less than 2.0 V at 50 ohms ± 0,5 Ohm;
- Rise time - less than 30 ns;
- The duration of the pulse at the 0.5 level - less than 70ns;
The range of frequencies of the device pattern generators G6-37 is 0.001 Hz to 20 MHz with the division into sub-bands:
I - 0,001 Hz-0, 01Gts;
II - 0,01 Hz-0, 1 Hz;
III - 0,1 Hz to 1 Hz;
IV - 1 Hz, 10 Hz;
V - 10Hz-100Hz;
VI - 100Hz-1000Hz;
VII - 1kHz-10kHz;
VIII - 10kHz-100kHz;
IX - 100kHz-1000kGts;
X - 1MHz-10MHz;
XI - 2MHz-20MHz;
Within each sub-band frequency is continuously adjustable with the use of the reference scale;
The basic error of frequency does not exceed:
- ± 2% of the maximum frequency subband in the frequency range 0.1 Hz to 100 kHz (subbands III-VIII);
- ± 3% of the maximum frequency sub-band in the frequency intervals 0.001 Hz-0, 1 Hz and 100 kHz-1000kGts (sub-bands of I, II, IX);
- ± 5% of the maximum frequency sub-band in the frequency range 1MHz-10MHz (sub-band X);
- ± 10% of the maximum frequency sub-band in the frequency range 2 MHz-20 MHz (sub-band XI);
Additional error of frequency device pattern generators G6-37 at ambient temperature change for every 10 ° C does not exceed one-half of the basic error;
Margin at the edges of the range of 0,001 Hz frequency 10MHz (subbands IX), and also at the beginning and end of the subbands - n e less basic error limit value. In the frequency range 2 MHz-20 MHz (XI sub-band) margin on the edges of sub-band is not standardized;
Frequency instability after a setup time interval of 1 hour, no more than;
- ± 0,3% for the 15 minutes of the generator in the frequency range 20 Hz-1 MHz;
- ± 0,5% for the 15 minutes of the generator in the frequency range 1MHz-10MHz;
- ± 1% within 3 hours of the generator in the frequency range of 20Hz-10MHz;
The instrument signal generator is a special form of G6-37 provides a smooth frequency tuning with an external control voltage;
The greatest amplitude value of a signal voltage on the base of any shape outlet than 5 V for a matched load 50 ohm ± 0,5 ohms in the frequency range 0,001 Hz 10MHz (I-X subbands), and not less than 2.5 V for a 2MHz range -20MHz (XI sub-band);
Limits the amplitude of the modulating signal voltage of any shape made ​​within not less than 20 dB;
Stepped amplitude attenuation of the signal voltage of any form on the main output of the device pattern generators G6-37 is carried out by means of remote attenuators provide attenuation of 20 dB and 40 dB at work on a matched load 50 ohms ± 0,5 Ohm (attenuators are in ZIP)
Tolerance attenuation attenuators in the operating frequency range does not exceed:
- ± 0,2 dB to 20 dB attenuator;
- ± 0,5 dB to 40 dB attenuator;
The instability of the amplitude of the voltage sine wave at frequencies above 20Hz does not exceed:
- 1% of 15 minutes;
- 3% for 3 hours;
The uneven voltage amplitude sine wave test pattern generators G6-37 unit does not exceed:
- ± 2,5% in the frequency range of 0.001 Hz-100 kHz (subbands I-VIII);
- ± 5% in the frequency range 100 kHz-1000kGts (subband IX);
- ± 12% in the frequency range 1MHz-10MHz (subband X);
In the frequency range of 2MHz-20MHz (sub-band XI) non-uniformity of the amplitude of the voltage sine wave is not standardized;
Harmonic factor sine wave does not exceed:
- 1% in the frequency range from 20 Hz to 1 kHz (sub-bands V, VI);
- 2.5% in the frequency range 1kHz to 200kHz (subbands VII, VI, IX);
For the frequency range from 200kHz to 10MHz (I sub-bands X, X) of each harmonic attenuation with respect to the first of at least:
- 30 dB in the frequency range from 200kHz to 10MHz (sub-band IX;
- 25 dB in the frequency range from 1 MHz to 10 MHz (sub-band X);
Harmonic factor sine wave signal in working conditions does not exceed:
- 2.5% in the frequency range from 20Hz to 1kHz (subbands V, VI);
- 3% in the frequency range from 1 kHz to 100 kHz (sub-bands VII, VIII);
For the frequency range of 100kHz to 10MHz (subbands IX, X) attenuation of each harmonic with respect to the first at least 20 dB;
In the frequency range of 2 MHz-20 MHz (sub-band XI) harmonic distortion sine wave signal is not standardized;
The nonlinearity coefficient unit pattern generators G6-37 does not exceed:
- 3% in the frequency range 0 Hz to 0,001, 1Hz (subbands of I, II) for the triangular and sawtooth-wave signal;
- 2% in the frequency range 1 kHz-100 kHz (subbands VII, VIII) of the triangular wave;
Rising and falling (individually) square wave signal does not exceed 30 does not work with a matched load 50 ohms ± 0,5 Ohm. Duration reverse sawtooth signal pulse form does not exceed 40 ns when using a matched 50 ohm ± 0,5 Ohm;
Releases for the front and cut for a square wave signal generator unit special form G6-37 does not exceed ± 5% when using a matched load of 50 ohms ± 0,5 Ohm at frequencies up to 10 MHz;
Duty cycle square wave signal in the frequency range 100kHz 0,001 Hz is 0.5;
The error does not exceed the duty cycle:
- ± 1% in the frequency range 100 kHz-1Hz (subbands IV-VIII);
- ± 5% in the range of 0,001 Hz frequency 1Hz (subbands I-III);
The fill factor square wave signal generator unit special form G6-37 in the frequency range of 100 kHz-20 MHz is not standardized;
The generator provides an internal or external mode PSK signals in the frequency range 100kHz 0.001 Hz (subbands I-VIII);
Position error phase PSK mode, defined by triangular signal does not exceed ± 15 °;
When the instrument test pattern generators G6-37 in the mode of the internal phase-shift keying phase change is made ​​through 8 periods. In the external phase modulation phase shift produced by the coherent oscillation of N periods where N - integer (N ≥ 2);
External phase shift keying generator provides the input signal with TTL level;
The generator provides its specifications after a setup time of 5 minutes;
The generator provides specifications after a setup time of 15 minutes;
Warm-up time to ensure that the technical characteristics of 1:00;
The generator allows continuous operation under the operating conditions for a time at least 16 hours while maintaining their performance;
Note. Continuous operation time does not include the time of an operating mode of the generator;
Device pattern generators G6-37 retains its specifications when powered from the mains AC 220V ± 22V, 50Hz ± 0,5 Hz or 220V ± 11V, ± 400 Hz frequency 10Hz;
The power consumed by the generator from the power supply at rated voltage does not exceed 55V ∙ A;
Mean time to failure of the device pattern generators G6-37 is not less than 10,000 hours;
Average recovery time 8:00;
Overall dimensions - not more than 312x134x330mm;
Weight - 6.5 kg.
Rate the product: G6-37
Number of views: 2816
Product rating: 4.9
Number of grades: 520
* rating and all product statistics are updated once a month; information is current as of 21 December 2024

Photos: G6-37

G6-37 device image.

G6-37 device image.

G6-37 front view.

G6-37 front view.

G6-37 side view with a handle.

G6-37 side view with a handle.

G6-37 rear view.

G6-37 rear view.

G6-37 side view.

G6-37 side view.

G6-37 overhead view.

G6-37 overhead view.

G6-37 bottom view.

G6-37 bottom view.

Poll

How did you find out about zapadpribor.com?

search engines

exhibition

online media

printed editions

colleagues advice

Vote

Leading online store Zapadpribor - a huge selection of measuring equipment for the best value and quality. So you can buy inexpensive devices, we monitor competitors' prices and are always ready to offer a lower price. We only sell quality products at the best prices. On our site you can buy cheaply as the latest innovations and proven equipment from the best manufacturers.

The site includes a special offer «buy at the best price» - if other Internet resources (bulletin board, forum or announcement of another online service) in products presented on our site, the lower price, we will sell it to you even cheaper! Buyers also additional discount for leaving a review or photo of use of our products.

In the price list contains not the whole range of products offered. Prices of goods, not included in the price list can learn to contact the manager. Also, our managers You can get detailed information about how cheap and profitable to buy instrumentation wholesale and retail. Telephone and e-mail for advice on the purchase , delivery or receipt are shown on the description of the goods. We have the most qualified staff, quality equipment and the best price.

 

Online store Zapadpribor - the official manufacturer's dealer test equipment. Our goal - selling high quality goods with best price offer and service to our customers. Our store can not only sell you the necessary instrument, but also offer additional services to its calibration, repair and installation. That you have a pleasant experience when shopping on our site, we have provided special gifts guaranteed to the most popular products.

 

We offer fast international shipping to almost every country in the world: Australia, Austria, Azerbaijan, Albania, Algeria, Anguilla, Angola, Antigua and Barbuda, Argentina, Aruba,  Bahamas, Bangladesh, Barbados, Bahrain, Belize, Belgium, Benin, Bermuda, Bulgaria, Bolivia, Bonaire, Sint-E. and Saba, Bosnia and Herzegovina, Botswana, Brazil, British Virgin Islands, Brunei Darussalam, Burkina Faso, Burundi, Bhutan, VietNam, Vanuatu, Vatican City, Venezuela, Armenia, Gabon, Guyana, Haiti, Gamia, Gambia, Ghana, Guatemala, Guinea, Gibraltar, Honduras, Hong Kong, Grenada, Greenland, Greece, Georgia, Denmark, Democratic Republic of the Congo, Jersey, Djibouti, Dominica, Dominican Republic, Ecuador, Eswatine, Estonia, Ethiopia, Egypt, Zambia, Zimbabwe, Jordan Indonesia, Ireland, Iceland, Spain, Italy, Cape Verde, Kazakhstan, Cayman Islands, Cambodia, Cameroon, Canada, Qatar, Kenya, Kyrgyzstan, China, Cyprus, Kiribati, Colombia, Comoros, Congo, Korea (Rep.), Costa Rica, Kot-d'Ivoire, Cuba, Kuwait, Curacao, Laos, Latvia, Lesotho, Lithuania, Liberia, Lebanon, Libya, Liechtenstein, Luxembourg, Myanmar, Mauritius, Mauritania, Madagascar, Macao, Malawi, Malaysia, Mali, Maldives, Malta, Morocco, Mexico, Mozambique, Moldova, Monaco, Monaco, Namibia, Nauru, Nepal, Niger, Nigeria, Netherlands, Germany, New Zealand, New Caledonia, Norway, UAE, Oman, Cook Islands, Pakistan, Palestine, Panama, Papua New Guinea, Paraguay, Peru, South Africa, Poland, Portugal, Republic of Chad, Rwanda, Romania, El Salvador, Samoa, San Marino, Saudi Arabia, Swaziland, Seychelles, Senegal, Saint Vincent and the Grenadines, Saint Kitts and Nevis, Saint Lucia, Serbia, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, United Kingdom of Great Britain and Northern Ireland, Sudan, Suriname, East Timor (Timor-Leste), USA, Sierra Leone, Tajikistan, Taiwan, Thailand, Tanzania (United Republic of), Togo, Tonga, Trinidad and Tobago, Tuvalu, Tunisia, Turkey, Turkmenistan, Uganda, Hungary, Uzbekistan, Uruguay, Faroe Islands, Fiji, Philippines, Finland, France, French Polynesia, Croatia, Central African Republic, Czech Republic, Chile, Montenegro, Switzerland, Sweden, Sri Lanka, Jamaica, Japan.

We also provide such metrological procedure: calibration, tare, graduated, testing of measuring instruments.

The online store takes an active part in such procedures as electronic bidding, tender, auction.

If there is no site in the descriptive information you need on the device you can always turn to us for help. Our qualified managers will update for you on the technical characteristics of the device from its technical documentation: user manual, certificate, form, operating instructions, diagram. If necessary, we will take a photo of your device, or a device stand. You can leave feedback on the unit purchased from us, the meter, the device, indicator, or product. Your review for your approval will be published on the site without contact information.

 

Description of the instruments taken from the technical documentation or technical literature. Most pictures of products made directly by our experts prior to shipment of goods. In the description of the device provided the main technical characteristics of the instrument: nominal measuring range, accuracy class, scale, supply voltage, size (size), weight. If the site you see the discrepancy device name (model) specifications, photo or documents attached - let us know - you will get a useful gift with-selling device.

 

While the need to clarify the overall weight and size or the size of the individual meter you can in our service center. If you need our engineers will help you choose the most complete analog or a suitable replacement for the device you are interested. All counterparts and replacement will be tested in one of our laboratories with the full compliance to your requirements.

In the technical documentation for each device or product, information is provided on the list and amount of precious metals content. The documentation gives the exact weight in grams of precious metals: Au gold, palladium Pd, platinum Pt, silver Ag, tantalum Ta and other platinum group metals (PGM) per unit item. These precious metals are found in nature in very limited quantities and therefore have such a high price.

On our website you can familiarize yourself with the technical characteristics of devices and obtain information on the content of precious metals in devices and radio components manufactured in the USSR. We draw your attention to the fact that often the actual content of precious metals differs by 10-25% from the reference one in a smaller direction! The price of precious metals will depend on their value and mass in grams.

All text and graphic information on the site is informative. The color, shade, material, geometric dimensions, weight, content, delivery set and other parameters of the goods presented on the site may vary depending on the batch of production and year of manufacture. Check with the sales department for more information.

 

If you can make repairs to the device yourself, our engineers can provide you with a complete set of necessary technical documentation: circuit diagram TO, ER, FD, PS. We also have an extensive database of technical and metrological documents: technical specifications (TS), the terms of reference (TOR), GOST (DSTU), the industry standard (OST) test procedure, the method of certification, verification scheme for more than 3,500 types of measuring equipment from the manufacturer this equipment. From the site you can download all the necessary software (the software driver) is required for the product purchased.

We carries out repairs and maintenance of measuring equipment in more than 75 different factories of the former Soviet Union and CIS.

We also have a library of legal documents that are related to our field of activity: the law, code, ordinance, decree, temporary position.