Ch1-53 Ch1-53
4.9 63
    Ch1-53 frequency standard is intended for reproduction, storage and delivery of highly stable frequency sinusoidal signals in continuous long-term operation.
    Nominal values ​​of the output signals of 0.1-MHz, 1 MHz, 5 MHz.
    Voltage outputs 50 Ohm - 1 Vrms.
Radiometric devices
frequency counters, synthesizers, frequency standards (CHrs, frequency standards (Ch2-, Ch3-, Ch7-, RCh and others)
Ch1-53 device image.

Price:

on request

 

Product information updated 10 October 2024.

Found cheaper?

Let us know. Our price is the best. 

Warranty:

12 months.

Warranty extension up to 5 years. 

Terms of delivery:

To all regions of the country, international delivery. 

print

Product information updated 10 October 2024.

Found cheaper?

Let us know. Our price is the best. 

Warranty:

12 months.

Warranty extension up to 5 years. 

Terms of delivery:

To all regions of the country, international delivery. 

print

Technical characteristics

Frequency Standard Ch1-53
Also, this device can be called: Ch153, Ch1 53.
Ch1-53 frequency standard is intended for reproduction, storage and delivery of highly stable frequency sinusoidal signals in continuous long-term operation.
Nominal values ​​of the output signals - 0.1 MHz, 1 MHz, 5 MHz.
Voltage outputs 50 Ohm - 1 Vrms.

Frequency standards Ch1-53 are designed as stand-alone device in the case of frameless design. The device is implemented using transistors integrated circuits. The front panel Ch1-53 is a niche in which are placed the indicator and switch control modes, pen correction frequency output signals and toggle charge internal battery. Output signals removed from the connectors on the rear panel.

Specifications:
Frequency correction limits the nominal value - ± 1,25 · 10 -7.
The relative change of the average value of the frequency signal to 1 day:
- After 2 h samoprogreva - ± 5.10 -8;
- After 8 h samoprogreva - ± 2.10 -8;
- After 24 hours of continuous operation - ± 5.10 -9;
- After 1 month of continuous operation - ± 5.10 -10.

RMS random relative frequency variation of the signal after 24 hours of continuous operation:
- 1 s - ± 2.10 -11;
- 10 seconds - ± 2.10 -11.
Temperature coefficient of frequency of 1 ° C - ± 1.10 -10.
Signal / noise ratio in the spectrum of the output signal for network components - 95 dB.

Signal / noise ratio in the spectrum of the output signal to noise measured in the 6 ± 2 Hz:
- Carrier offset 30 Hz - 105 dB;
- Carrier offset 300 Hz - 120 dB;
- Carrier offset 3000 Hz - 135 dB.

The attenuation of the harmonic components of output signals - not less than 40 dB.
Mains voltage - 220 ± 22; 115 ± 5,5 V.
Supply frequency - 50 ± 0,5 Hz from 388 Hz to 428 Hz.
Voltage DC - +27 ± 3 V.

Power consumption frequency standard Ch1-53:
- On heating - 60 · A;
- In steady state - 25 V • A.
Dimensions - 480h120h475 mm.
Mass Ch1-53 frequency standard - 20 kg.

Operating conditions frequency standards:
Temperature - from +5 ° C to +40 ° C.
Relative humidity at +30 ° C - 98%.
Frequency Standard Ch1-53 is used as a working custodian (secondary standard) frequency source model and frequency measuring systems: comparison of frequencies, microwave spectroscopy, Doppler and communication systems.
Rate the product: Ch1-53
Number of views: 1613
Product rating: 4.5
Number of grades: 454
* rating and all product statistics are updated once a month; information is current as of 22 October 2024

Photos: Ch1-53

Ch1-53 device image.

Ch1-53 device image.

Ch1-53 device image.

Ch1-53 device image.

Ch1-53 view panel of the device.

Ch1-53 view panel of the device.

Ch1-53 side view.

Ch1-53 side view.

Ch1-53 rear view.

Ch1-53 rear view.

Ch1-53 overhead view.

Ch1-53 overhead view.

Ch1-53 bottom view.

Ch1-53 bottom view.

Leading online store Zapadpribor - a huge selection of measuring equipment for the best value and quality. So you can buy inexpensive devices, we monitor competitors' prices and are always ready to offer a lower price. We only sell quality products at the best prices. On our site you can buy cheaply as the latest innovations and proven equipment from the best manufacturers.

The site includes a special offer «buy at the best price» - if other Internet resources (bulletin board, forum or announcement of another online service) in products presented on our site, the lower price, we will sell it to you even cheaper! Buyers also additional discount for leaving a review or photo of use of our products.

In the price list contains not the whole range of products offered. Prices of goods, not included in the price list can learn to contact the manager. Also, our managers You can get detailed information about how cheap and profitable to buy instrumentation wholesale and retail. Telephone and e-mail for advice on the purchase , delivery or receipt are shown on the description of the goods. We have the most qualified staff, quality equipment and the best price.

 

Online store Zapadpribor - the official manufacturer's dealer test equipment. Our goal - selling high quality goods with best price offer and service to our customers. Our store can not only sell you the necessary instrument, but also offer additional services to its calibration, repair and installation. That you have a pleasant experience when shopping on our site, we have provided special gifts guaranteed to the most popular products.

 

We offer fast international shipping to almost every country in the world: Australia, Austria, Azerbaijan, Albania, Algeria, Anguilla, Angola, Antigua and Barbuda, Argentina, Aruba,  Bahamas, Bangladesh, Barbados, Bahrain, Belize, Belgium, Benin, Bermuda, Bulgaria, Bolivia, Bonaire, Sint-E. and Saba, Bosnia and Herzegovina, Botswana, Brazil, British Virgin Islands, Brunei Darussalam, Burkina Faso, Burundi, Bhutan, VietNam, Vanuatu, Vatican City, Venezuela, Armenia, Gabon, Guyana, Haiti, Gamia, Gambia, Ghana, Guatemala, Guinea, Gibraltar, Honduras, Hong Kong, Grenada, Greenland, Greece, Georgia, Denmark, Democratic Republic of the Congo, Jersey, Djibouti, Dominica, Dominican Republic, Ecuador, Eswatine, Estonia, Ethiopia, Egypt, Zambia, Zimbabwe, Jordan Indonesia, Ireland, Iceland, Spain, Italy, Cape Verde, Kazakhstan, Cayman Islands, Cambodia, Cameroon, Canada, Qatar, Kenya, Kyrgyzstan, China, Cyprus, Kiribati, Colombia, Comoros, Congo, Korea (Rep.), Costa Rica, Kot-d'Ivoire, Cuba, Kuwait, Curacao, Laos, Latvia, Lesotho, Lithuania, Liberia, Lebanon, Libya, Liechtenstein, Luxembourg, Myanmar, Mauritius, Mauritania, Madagascar, Macao, Malawi, Malaysia, Mali, Maldives, Malta, Morocco, Mexico, Mozambique, Moldova, Monaco, Monaco, Namibia, Nauru, Nepal, Niger, Nigeria, Netherlands, Germany, New Zealand, New Caledonia, Norway, UAE, Oman, Cook Islands, Pakistan, Palestine, Panama, Papua New Guinea, Paraguay, Peru, South Africa, Poland, Portugal, Republic of Chad, Rwanda, Romania, El Salvador, Samoa, San Marino, Saudi Arabia, Swaziland, Seychelles, Senegal, Saint Vincent and the Grenadines, Saint Kitts and Nevis, Saint Lucia, Serbia, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, United Kingdom of Great Britain and Northern Ireland, Sudan, Suriname, East Timor (Timor-Leste), USA, Sierra Leone, Tajikistan, Taiwan, Thailand, Tanzania (United Republic of), Togo, Tonga, Trinidad and Tobago, Tuvalu, Tunisia, Turkey, Turkmenistan, Uganda, Hungary, Uzbekistan, Uruguay, Faroe Islands, Fiji, Philippines, Finland, France, French Polynesia, Croatia, Central African Republic, Czech Republic, Chile, Montenegro, Switzerland, Sweden, Sri Lanka, Jamaica, Japan.

We also provide such metrological procedure: calibration, tare, graduated, testing of measuring instruments.

The online store takes an active part in such procedures as electronic bidding, tender, auction.

If there is no site in the descriptive information you need on the device you can always turn to us for help. Our qualified managers will update for you on the technical characteristics of the device from its technical documentation: user manual, certificate, form, operating instructions, diagram. If necessary, we will take a photo of your device, or a device stand. You can leave feedback on the unit purchased from us, the meter, the device, indicator, or product. Your review for your approval will be published on the site without contact information.

 

Description of the instruments taken from the technical documentation or technical literature. Most pictures of products made directly by our experts prior to shipment of goods. In the description of the device provided the main technical characteristics of the instrument: nominal measuring range, accuracy class, scale, supply voltage, size (size), weight. If the site you see the discrepancy device name (model) specifications, photo or documents attached - let us know - you will get a useful gift with-selling device.

 

While the need to clarify the overall weight and size or the size of the individual meter you can in our service center. If you need our engineers will help you choose the most complete analog or a suitable replacement for the device you are interested. All counterparts and replacement will be tested in one of our laboratories with the full compliance to your requirements.

In the technical documentation for each device or product, information is provided on the list and amount of precious metals content. The documentation gives the exact weight in grams of precious metals: Au gold, palladium Pd, platinum Pt, silver Ag, tantalum Ta and other platinum group metals (PGM) per unit item. These precious metals are found in nature in very limited quantities and therefore have such a high price.

On our website you can familiarize yourself with the technical characteristics of devices and obtain information on the content of precious metals in devices and radio components manufactured in the USSR. We draw your attention to the fact that often the actual content of precious metals differs by 10-25% from the reference one in a smaller direction! The price of precious metals will depend on their value and mass in grams.

All text and graphic information on the site is informative. The color, shade, material, geometric dimensions, weight, content, delivery set and other parameters of the goods presented on the site may vary depending on the batch of production and year of manufacture. Check with the sales department for more information.

 

If you can make repairs to the device yourself, our engineers can provide you with a complete set of necessary technical documentation: circuit diagram TO, ER, FD, PS. We also have an extensive database of technical and metrological documents: technical specifications (TS), the terms of reference (TOR), GOST (DSTU), the industry standard (OST) test procedure, the method of certification, verification scheme for more than 3,500 types of measuring equipment from the manufacturer this equipment. From the site you can download all the necessary software (the software driver) is required for the product purchased.

We carries out repairs and maintenance of measuring equipment in more than 75 different factories of the former Soviet Union and CIS.

We also have a library of legal documents that are related to our field of activity: the law, code, ordinance, decree, temporary position.