waveguide loads (E9- and others)

НКП-17 нагрузка короткозамкнутая подвижная предназначена для полного отражения падающей СВЧ-мощности в волноводных трактах.

Диапазон частот - от 25,95 ГГц до 37,5 ГГц.

Сечение волноводного тракта - 7,2×3,4 мм.

НРП-3 нагрузка рассогласованная подвижная предназначена для поверки панорамных измерителей КСВН и ослабления по КСВН.

Диапазон частот - от 33 ГГц до 37,5 ГГц.

Номинальное значение КСВН - 1,2.

НРП-4 нагрузка рассогласованная подвижная предназначена для поверки панорамных измерителей КСВН и ослабления по КСВН.

Диапазон частот - от 33 ГГц до 37,5 ГГц.

Номинальное значение КСВН - 1,4.

НРП-5 нагрузка рассогласованная подвижная предназначена для поверки панорамных измерителей КСВН и ослабления по КСВН.

Диапазон частот - от 33 ГГц до 37,5 ГГц.

Номинальное значение КСВН - 2.

НСН-18 нагрузка согласованная неподвижная предназначена для полного поглощения падающей СВЧ-мощности в волноводных трактах.

Диапазон частот - от 25,95 ГГц до 37,5 ГГц.

Сечение волноводного тракта - 7,2×3,4 мм.

НСН-19 нагрузка согласованная неподвижная предназначена для полного поглощения падающей СВЧ-мощности в волноводных трактах.

Диапазон частот - от 25,95 ГГц до 37,5 ГГц.

Сечение в волноводном тракте - 7,2×3,4 мм.

НСН-6 нагрузка согласованная неподвижная предназначена для создания режима с малым отражением в волноводных трактах.

Диапазон частот - от 37,5 ГГц до 53,57 ГГц.

Размеры волновода - 5,2×2,6 мм.

НСП-17 нагрузка подвижная согласованная предназначена для полного поглощения падающей СВЧ-мощности в волноводных трактах и может изменять фазу остаточного отражения.

Диапазон частот - от 25,95 ГГц до 37,5 ГГц.

КСВН - 1,02.

E9-111 exemplary waveguide load designed for broadband matching output waveguide devices.

Frequency range - from 17,44 GHz to 25,86 GHz.

Cross section of rectangular waveguides - 11×5,5 mm.

E9-112 exemplary waveguide load designed for broadband matching output waveguide devices.

Frequency range - from 17,44 GHz to 25,86 GHz.

Cross section of rectangular waveguides - 11×5,5 mm.

E9-113 exemplary waveguide load designed for broadband matching output waveguide devices.

Frequency range - from 17,44 GHz to 25,86 GHz.

Cross section of rectangular waveguides - 11×5,5 mm.

E9-114 exemplary waveguide load designed for broadband matching output waveguide devices.

Frequency range - from 17,44 GHz to 25,86 GHz.

Cross section of rectangular waveguides - 11×5,5 mm.

E9-115 exemplary waveguide load designed for broadband matching output waveguide devices.

Frequency range - from 25,86 GHz to 37,5 GHz.

Cross section of rectangular waveguides - 7,2×3,4 mm.

E9-116 exemplary waveguide load designed for broadband matching output waveguide devices.

Frequency range - from 25,86 GHz to 37,5 GHz.

Cross section of rectangular waveguides - 7,2×3,4 mm.

E9-117 exemplary waveguide load designed for broadband matching output waveguide devices.

Frequency range - from 25,86 GHz to 37,5 GHz.

Cross section of rectangular waveguides - 7,2×3,4 mm.

E9-118 exemplary waveguide load designed for broadband matching output waveguide devices.

Frequency range - from 25,86 GHz to 37,5 GHz.

Cross section of rectangular waveguides - 7,2×3,4 mm.

E9-123 load waveguide designed for calibration and verification of high-frequency paths.
Modifications - E9-123/1 E9-123/2, E9-123/3 E9-123/4.
Frequency range - from 2,59 GHz to 3,94 GHz.
RF path-section - 72×34 mm.

    Set the load impedance waveguide E9-124 (E9124, E-9-124, E 9124, E9-124, E9124, E-9-124, E 9124, Є9-124-124 Є, Є-9-124 Є 9124, e9-124, e9124, e-9-124, e 9124)
    E9-124 - set the load impedance waveguide is used for configuration and calibration of microwave devices and for use as end caps.
    Measurement range - 3.94 GHz, 5, 64GGts.
    Cross-section of the RF path - 48 × 24mm.

E9-125 load waveguide designed for calibration and verification of high-frequency paths.
Modifications - E9-125/1, E9-125/2, E9-125/3, E9-125/4.
Frequency - 5,64 GHz to 8,24 GHz.
HF-path cross section - 23×10 mm.

E9-126 load waveguide designed for calibration and verification of high-frequency paths.
Modifications - E9-126/1, E9-126/2, E9-126/3, E9-126/4.
Frequency range - from 8,24 GHz to 12,05 GHz.
HF-path cross section - 23×10 mm.

E9-127 load waveguide designed for calibration and verification of high-frequency paths.
Modifications - E9-127/1, E9-127/2, E9-127/3, E9-127/4.
Frequency range - from 12 GHz to 16,67 GHz.
HF-path cross section - 17×8 mm.

E9-128 load waveguide designed for broadband matching output waveguide devices.

E9-129 load exemplary waveguide designed for broadband matching output waveguide devices.

Э9-155 нагрузка волноводная образцовая предназначена:

- для настройки, калибровки и поверки автоматических измерителей КСВН;

- для поверки измерительных линий и других измерителей КСВН;

- для измерения направленности направленных ответвителей, для контроля волноводных проходных устройств разного типа.

Номинальное значение КСВН - 1,4±0,1.

Погрешность КСВН - ±1,5%.

Погрешность фазы - ±3°.

Э9-156 нагрузка волноводная образцовая предназначена:

- для настройки, калибровки и поверки автоматических измерителей КСВН;

- для поверки измерительных линий и других измерителей КСВН;

- для измерения направленности направленных ответвителей, для контроля волноводных проходных устройств разного типа.

Номинальное значение КСВН - 2±0,1.

Погрешность КСВН - ±2,5%.

Погрешность фазы - ±2°.

E9-180 load waveguide designed for broadband matching output waveguide devices.

E9-5 load waveconducting is designed for broadband matching output waveguide devices.

E9-5a load waveconducting is designed for broadband matching output waveguide devices.

Power - 250 Watt.

E9-78/1 exemplary waveguide load designed for setup, calibration, verification and automatic VSWR meters, measuring lines, as well as measurements of the directional coupler.
Frequency range - from 2,6 GHz to 3,94 GHz.
Cross section of rectangular waveguides - 72×34 mm.

E9-78/2 exemplary waveguide load designed for setup, calibration, verification and automatic VSWR meters, measuring lines, as well as measurements of the directional coupler.
Frequency range - from 2,6 GHz to 3,94 GHz.
Cross section of rectangular waveguides - 72×34 mm.

E9-78/3 exemplary waveguide load designed for setup, calibration, verification and automatic VSWR meters, measuring lines, as well as measurements of the directional coupler.
Frequency range - from 2,6 GHz to 3,94 GHz.
Cross section of rectangular waveguides - 72×34 mm.

E9-78/4 exemplary waveguide load designed for setup, calibration, verification and automatic VSWR meters, measuring lines, as well as measurements of the directional coupler.
Frequency range - from 2,6 GHz to 3,94 GHz.
Cross section of rectangular waveguides - 72×34 mm.

E9-78/5 exemplary waveguide load designed for setup, calibration, verification and automatic VSWR meters, measuring lines, as well as measurements of the directional coupler.
Frequency range - from 2,6 GHz to 3,94 GHz.
Cross section of rectangular waveguides - 72×34 mm.

E9-79/1 exemplary waveguide load designed for setup, calibration, verification and automatic VSWR meters, measuring lines, as well as measurements of the directional coupler.
Frequency range - from 3,2 GHz to 4,8 GHz.
Cross section of rectangular waveguides - 58×25 mm.

E9-79/2 exemplary waveguide load designed for setup, calibration, verification and automatic VSWR meters, measuring lines, as well as measurements of the directional coupler.
Frequency range - from 3,2 GHz to 4,8 GHz.
Cross section of rectangular waveguides - 58×25 mm.

E9-79/3 exemplary waveguide load designed for setup, calibration, verification and automatic VSWR meters, measuring lines, as well as measurements of the directional coupler.
Frequency range - from 3,2 GHz to 4,8 GHz.
Cross section of rectangular waveguides - 58×25 mm.

E9-79/4 exemplary waveguide load designed for setup, calibration, verification and automatic VSWR meters, measuring lines, as well as measurements of the directional coupler.
Frequency range - from 3,2 GHz to 4,8 GHz.
Cross section of rectangular waveguides - 58×25 mm.

E9-79/5 exemplary waveguide load designed for setup, calibration, verification and automatic VSWR meters, measuring lines, as well as measurements of the directional coupler.
Frequency range - from 3,2 GHz to 4,8 GHz.
Cross section of rectangular waveguides - 58×25 mm.

E9-80/1 exemplary waveguide load designed for setup, calibration, verification and automatic VSWR meters, measuring lines, as well as measurements of the directional coupler.
Frequency range - from 3,94 GHz to 5,64 GHz.
Cross section of rectangular waveguides - 48×24 mm.

E9-80/2 exemplary waveguide load designed for setup, calibration, verification and automatic VSWR meters, measuring lines, as well as measurements of the directional coupler.
Frequency range - from 3,94 GHz to 5,64 GHz.
Cross section of rectangular waveguides - 48×24 mm.

E9-80/3 exemplary waveguide load designed for setup, calibration, verification and automatic VSWR meters, measuring lines, as well as measurements of the directional coupler.
Frequency range - from 3,94 GHz to 5,64 GHz.
Cross section of rectangular waveguides - 48×24 mm.

E9-80/4 exemplary waveguide load designed for setup, calibration, verification and automatic VSWR meters, measuring lines, as well as measurements of the directional coupler.
Frequency range - from 3,94 GHz to 5,64 GHz.
Cross section of rectangular waveguides - 48×24 mm.

E9-80/5 exemplary waveguide load designed for setup, calibration, verification and automatic VSWR meters, measuring lines, as well as measurements of the directional coupler.
Frequency range - from 3,94 GHz to 5,64 GHz.
Cross section of rectangular waveguides - 48×24 mm.

E9-81/1 exemplary waveguide load designed for setup, calibration, verification and automatic VSWR meters, measuring lines, as well as measurements of the directional coupler.
Frequency range - from 5,64 GHz to 8,24 GHz.
Cross section of rectangular waveguides - 35×15 mm.

E9-81/2 exemplary waveguide load designed for setup, calibration, verification and automatic VSWR meters, measuring lines, as well as measurements of the directional coupler.
Frequency range - from 5,64 GHz to 8,24 GHz.
Cross section of rectangular waveguides - 35×15 mm.

E9-81/3 exemplary waveguide load designed for setup, calibration, verification and automatic VSWR meters, measuring lines, as well as measurements of the directional coupler.
Frequency range - from 5,64 GHz to 8,24 GHz.
Cross section of rectangular waveguides - 35×15 mm.

E9-81/4 exemplary waveguide load designed for setup, calibration, verification and automatic VSWR meters, measuring lines, as well as measurements of the directional coupler.
Frequency range - from 5,64 GHz to 8,24 GHz.
Cross section of rectangular waveguides - 35×15 mm.

E9-81/5 exemplary waveguide load designed for setup, calibration, verification and automatic VSWR meters, measuring lines, as well as measurements of the directional coupler.
Frequency range - from 5,64 GHz to 8,24 GHz.
Cross section of rectangular waveguides - 35×15 mm.

E9-82/1 exemplary waveguide load designed for setup, calibration, verification and automatic VSWR meters, measuring lines, as well as measurements of the directional coupler.

Frequency range - from 6,85 GHz to 9,98 GHz.

Cross section of rectangular waveguides - 28,5×12,6 mm.

E9-82/2 exemplary waveguide load designed for setup, calibration, verification and automatic VSWR meters, measuring lines, as well as measurements of the directional coupler.

Frequency range - from 6,85 GHz to 9,98 GHz.

Cross section of rectangular waveguides - 28,5×12,6 mm.

E9-82/3 exemplary waveguide load designed for setup, calibration, verification and automatic VSWR meters, measuring lines, as well as measurements of the directional coupler.

Frequency range - from 6,85 GHz to 9,98 GHz.

Cross section of rectangular waveguides - 28,5×12,6 mm.

E9-82/4 exemplary waveguide load designed for setup, calibration, verification and automatic VSWR meters, measuring lines, as well as measurements of the directional coupler.

Frequency range - from 6,85 GHz to 9,98 GHz.

Cross section of rectangular waveguides - 28,5×12,6 mm.

E9-82/5 exemplary waveguide load designed for setup, calibration, verification and automatic VSWR meters, measuring lines, as well as measurements of the directional coupler.

Frequency range - from 6,85 GHz to 9,98 GHz.

Cross section of rectangular waveguides - 28,5×12,6 mm.

E9-83/1 exemplary waveguide load designed for setup, calibration, verification and automatic VSWR meters, measuring lines, as well as measurements of the directional coupler.

Frequency range - from 8,24 GHz to 12,05 GHz.

Cross section of rectangular waveguides - 23×10 mm.

E9-83/2 exemplary waveguide load designed for setup, calibration, verification and automatic VSWR meters, measuring lines, as well as measurements of the directional coupler.

Frequency range - from 8,24 GHz to 12,05 GHz.

Cross section of rectangular waveguides - 23×10 mm.

E9-83/3 exemplary waveguide load designed for setup, calibration, verification and automatic VSWR meters, measuring lines, as well as measurements of the directional coupler.

Frequency range - from 8,24 GHz to 12,05 GHz.

Cross section of rectangular waveguides - 23×10 mm.

E9-83/4 exemplary waveguide load designed for setup, calibration, verification and automatic VSWR meters, measuring lines, as well as measurements of the directional coupler.

Frequency range - from 8,24 GHz to 12,05 GHz.

Cross section of rectangular waveguides - 23×10 mm.

E9-83/5 exemplary waveguide load designed for setup, calibration, verification and automatic VSWR meters, measuring lines, as well as measurements of the directional coupler.

Frequency range - from 8,24 GHz to 12,05 GHz.

Cross section of rectangular waveguides - 23×10 mm.

E9-84/1 exemplary waveguide load designed for setup, calibration, verification and automatic VSWR meters, measuring lines, as well as measurements of the directional coupler.

Frequency range - from 11,50 GHz to 16,70 GHz.

Cross section of rectangular waveguides - 17×8 mm.

E9-84/2 exemplary waveguide load designed for setup, calibration, verification and automatic VSWR meters, measuring lines, as well as measurements of the directional coupler.

Frequency range - from 11,50 GHz to 16,70 GHz.

Cross section of rectangular waveguides - 17×8 mm.

E9-84/3 exemplary waveguide load designed for setup, calibration, verification and automatic VSWR meters, measuring lines, as well as measurements of the directional coupler.

Frequency range - from 11,50 GHz to 16,70 GHz.

Cross section of rectangular waveguides - 17×8 mm.

E9-84/4 exemplary waveguide load designed for setup, calibration, verification and automatic VSWR meters, measuring lines, as well as measurements of the directional coupler.

Frequency range - from 11,50 GHz to 16,70 GHz.

Cross section of rectangular waveguides - 17×8 mm.

E9-84/5 exemplary waveguide load designed for setup, calibration, verification and automatic VSWR meters, measuring lines, as well as measurements of the directional coupler.

Frequency range - from 11,50 GHz to 16,70 GHz.

Cross section of rectangular waveguides - 17×8 mm.

E9-85/1 exemplary waveguide load designed for setup, calibration, verification and automatic VSWR meters, measuring lines, as well as measurements of the directional coupler.

Frequency range - from 12,05 GHz to 17,44 GHz.

Cross section of rectangular waveguides - 16×8 mm.

E9-85/2 exemplary waveguide load designed for setup, calibration, verification and automatic VSWR meters, measuring lines, as well as measurements of the directional coupler.

Frequency range - from 12,05 GHz to 17,44 GHz.

Cross section of rectangular waveguides - 16×8 mm.

E9-85/3 exemplary waveguide load designed for setup, calibration, verification and automatic VSWR meters, measuring lines, as well as measurements of the directional coupler.

Frequency range - from 12,05 GHz to 17,44 GHz.

Cross section of rectangular waveguides - 16×8 mm.

E9-85/4 exemplary waveguide load designed for setup, calibration, verification and automatic VSWR meters, measuring lines, as well as measurements of the directional coupler.

Frequency range - from 12,05 GHz to 17,44 GHz.

Cross section of rectangular waveguides - 16×8 mm.

E9-85/5 exemplary waveguide load designed for setup, calibration, verification and automatic VSWR meters, measuring lines, as well as measurements of the directional coupler.

Frequency range - from 12,05 GHz to 17,44 GHz.

Cross section of rectangular waveguides - 16×8 mm.