Products catalog

size 80х80mm

I-60-5-1

I-60-5-1 measurer liquid level indicator is a device equipped with a magneto system and measuring unit moving magnet.
Overall dimensions - 80×80×95 mm.
Measuring range - from 0 to 5 mm of water. art.
Accuracy class - 4,0.

More info ...

M1420

M1420 ammeter, voltmeter M1420, M1420 milliammeter, microammeter M1420, M1420 kiloampermetr, kilovoltmeter M1420 (M 1420, M-1420)
Designed to measure current and voltage in the DC network of power plants, as well as for work in tough conditions on companies in various industries.
Dimensions - 80h80h126mm.
Accuracy class - 2.5.
More info ...

M1420.1

M1420.1 ammeter, voltmeter M1420.1, M1420.1 milliammeter, microammeter M1420.1, M1420.1 kiloampermetr, kilovoltmeter M1420.1 (M 1420.1, M-1420.1)
Designed to measure current and voltage in the DC network of power plants, as well as for work in tough conditions on companies in various industries.
Dimensions - 80h80h126mm.
Accuracy class - 2.5.
Impact-resistant, vibration resistant, vibration.
More info ...

M1423

Megaohmmeter M1423 (M 1423, M-1423, m1423, m 1423, m-1423)

Designed for short-term (up to 1 min.), Insulation resistance measurement including AC and DC power under the operating voltage, including those with a galvanic connection to the AC mains through a semiconductor rectifiers, and insulation resistance measurement de-energized network of direct and alternating current;
Measuring ranges - 0 MW-5 MW;
Rated voltage controlled network 127V, 220V or 380V;
Nominal frequency range 50Hz-controlled 500Hz;
Maximum permissible error of the instrument in the measurement range is ± 2,5% of the length of the scale.
More info ...

М1423.1

М1423.1 мегомметр углубленного монтажа для измерения сопротивления изоляции сетей переменного тока.

Габаритные размеры - 80×80×166 мм.

Диапазон измерений - от 0 до 5 МОм.

Предел допускаемой основной погреши в диапазоне измерений от длины шкалы - ±2,5%.

More info ...

M1428

Megger M1428 (M 1428, M-1428)
Designed for short-term measurement of insulation resistance networks of AC and DC under voltage, including having a galvanic connection to the network via an AC solid state rectifiers, as well as insulation resistance deenergised network of direct and alternating current.
Dimensions - 80h80h126mm.
Accuracy class - 2.5.
More info ...

M1428.1

Megger M1428.1 (M 1428.1, M-1428.1)
Designed for short-term measurement of insulation resistance networks of AC and DC under voltage, including having a galvanic connection to the network via an AC solid state rectifiers, as well as insulation resistance deenergised network of direct and alternating current.
Dimensions - 80h80h126mm.
Accuracy class - 2.5.
More info ...

M1611.2

M1611.2 ammeter, voltmeter M1611.2 (M 1611.2, M-1611.2)
Designed to measure current and voltage in the network and DC pulsed current frequency of 100 Hz electric and electric rolling stock of railways and traction engines, as well as to determine the insulation resistance of networks.
Dimensions - 80х80mm.
Accuracy class - 1.5.
Resistand to shaking, vibration.
More info ...

М1611.2-2

    Амперметр М1611.2-2, вольтметр М1611.2-2, миллиамперметр М1611.2-2, килоамперметр М1611.2-2, киловольтметр М1611.2-2 (М-1611.2-2, М 1611.2-2, m1611.2-2, m-1611.2-2, m 1611.2-2)
    Предназначен для измерений тока и напряжения в сетях постоянного тока и пульсирующего тока частотой 100Гц электровоза и электроподвижного состава железных дорог;
    Габаритные размеры - 80х80мм;
    Класс точности - 1,0;
    Ударостойкий, вибростойкий.
More info ...
    Амперметр М1611.2-2, вольтметр М1611.2-2, миллиамперметр М1611.2-2, килоамперметр М1611.2-2, киловольтметр М1611.2-2 (М-1611.2-2, М 1611.2-2, m1611.2-2, m-1611.2-2, m 1611.2-2)
    Предназначен для измерений тока и напряжения в сетях постоянного тока и пульсирующего тока частотой 100Гц электровоза и электроподвижного состава железных дорог;
    Габаритные размеры - 80х80мм;
    Класс точности - 1,0;
    Ударостойкий, вибростойкий.
More info ...

C1420

Ammeter C1420, C1420 voltmeter, milliammeter C1420, C1420 kiloampermetr, kilovoltmeter C1420 (C 1420, C-1420)
Designed to measure voltage in AC networks 50Hz and 400Hz power plants, as well as for use in locomotives.
Dimensions - 80h80h166mm.
Accuracy class - 2.5.
Vibration, shock-resistant, vibration resistant, splash-proof.
More info ...

C1420.1

C1420.1 ammeter, voltmeter C1420.1, milliammeter C1420.1, kiloampermetr C1420.1, kilovoltmeter C1420.1 (C 1420.1, C-1420.1)
Designed to measure voltage and current in AC circuits power plants, as well as for other power plants operating in harsh environments in enterprises of different industries.
Dimensions - 80h80h166mm.
Accuracy class - 2.5.
More info ...

TS1424

Phase meter TS1424 (TS-1424, TS 1424)
For measuring the power factor in three-phase AC networks at even load phases and symmetrical voltage.
Overall dimensions 80x80x166 mm.
Class 2.5.
Resistant to shaking, impact, vibration, shock-resistant.
More info ...

TS1424.1

    TS1424.1 phasometer panel is designed to measure the power factor in three phase, 50 Hz and 400 Hz alternating current at a uniform load phase voltage and symmetrical.
     Dimensions - 80x80x166 mm.
     Accuracy class - 2.5.
     Shaking durable, shock-resistant, vibration, vibration resistant.
More info ...

TS1425

TS1425 phase pointer (TS 1425, TS-1425) analogue D145/1 (L 145/1, D-145/1)

Designed to determine the phase sequence in three-phase networks of power plants;
Rated voltage - 127V, 220V;
Nominal frequency - 50 Hz, 400 Hz;
Vibration, shock-resistant.
More info ...

Ц1425.1

    Фазоуказатель Ц1425.1 (Ц14251, Ц 1425 1, Ц-1425-1, Ц-1425.1, Ц 1425.1)
    Предназначен для определения порядка следования фаз в трехфазных сетях энергетических установок;
    Номинальное напряжение - 127В, 220В;
    Номинальная частота - 50Гц, 400Гц;
    Вибропрочный, ударопрочный.
More info ...

TS1426

Frequency counter TS1426 (TS-1426, TS 1426)

Designed to measure the frequency of AC networks of power plants;
Measuring ranges - 45Hz to 55Hz, 55Hz, 65Hz, 350Hz, 450Hz;
Rated voltage controlled network 127V, 220V or 380V;
Maximum permissible error is ± 0,5%.
Dimensions - 80x80mm.
More info ...

Ц1426.1

    Частотомер Ц1426.1 (Ц14261, Ц 1426 1, Ц-1426-1, Ц-1426.1, Ц 1426.1)
    Предназначен для измерения частоты в сетях переменного тока энергетических установок;
    Диапазоны измерений - 45Гц-55Гц, 55Гц-65Гц, 350Гц-450Гц;
    Номинальное напряжение контролируемой сети 127В, 220В или 380В;
    Предел допускаемой основной погрешности равен ±0,5%.
    Габаритные размеры  - 80х80мм.
    Используется с добавочным устройством Р1826.1/7.
More info ...

C1427

Wattmeter C1427, C1427 varmetr (C-1427, C 1427)
It is intended to measure active and reactive power in three-phase networks of power plants, 50 Hz and 400 Hz;
Rated active power factor cosφ - 1,0;
Nominal Power Factor sinφ - 1,0;
Acceptable basic error limit is ± 2,5% of the length of the scale;
Vibration-resistant, shock-resistant.
More info ...

TS1428

Wattmeter TS1428, TS1428 varmeter (TS-1428, TS 1428)

Designed for measurement of active and reactive power in three-phase systems of power plants, 50 Hz and 400 Hz;
Nominal Power Factor cosφ - 1,0;
Nominal Power Factor sinφ - 1,0;
Maximum permissible error is ± 2,5% of the length of the scale;
Vibration-proof, shock-proof.
More info ...

TS1428.1

Wattmeter TS1428.1, varmeter TS1428.1 (TS14281, TS 1428 1, TS-1428-1, TS-1428.1, TS 1428.1)

Designed for measurement of active and reactive power in three-phase networks of power plants, 50 Hz and 400 Hz;
Rated active power factor cosφ - 1,0;
Rated power factor sinφ - 1,0;
Maximum permissible error is ± 2,5% of the length of the scale;
Vibration-proof, shock-proof.
More info ...

C1611.2

Voltmeter C1611.2 (C 1611.2, C-1611.2)
Designed to measure voltage in AC circuits rated 50 Hz electric and electric rolling stock of railways.
Dimensions - 80h80h162mm.
Accuracy class - 2.5.
More info ...

Э1425

no-image
    Синхроноскоп Э1425 (Э-1425, Э 1425, Е1425, Е-1425, Е 1425, Є1425, Є-1425, Є 1425, e1425, e-1425, e 1425)
    Для синхронизации генераторов трехфазного тока.
    Номинальное напряжение 127В или 380В.
    Номинальная частота 50Гц или 400Гц.
    Габаритные размеры 80x80x166мм.
    Погрешность ±3°.
    Тряскопрочный, ударопрочный, стойкий к синусоидальной вибрации до частот 120Гц.
More info ...

Leading online store Zapadpribor - a huge selection of measuring equipment for the best value and quality. So you can buy inexpensive devices, we monitor competitors' prices and are always ready to offer a lower price. We only sell quality products at the best prices. On our site you can buy cheaply as the latest innovations and proven equipment from the best manufacturers.

The site includes a special offer «buy at the best price» - if other Internet resources (bulletin board, forum or announcement of another online service) in products presented on our site, the lower price, we will sell it to you even cheaper! Buyers also additional discount for leaving a review or photo of use of our products.

In the price list contains not the whole range of products offered. Prices of goods, not included in the price list can learn to contact the manager. Also, our managers You can get detailed information about how cheap and profitable to buy instrumentation wholesale and retail. Telephone and e-mail for advice on the purchase , delivery or receipt are shown on the description of the goods. We have the most qualified staff, quality equipment and the best price.

 

Online store Zapadpribor - the official manufacturer's dealer test equipment. Our goal - selling high quality goods with best price offer and service to our customers. Our store can not only sell you the necessary instrument, but also offer additional services to its calibration, repair and installation. That you have a pleasant experience when shopping on our site, we have provided special gifts guaranteed to the most popular products.

 

We offer fast international shipping to almost every country in the world: Australia, Austria, Azerbaijan, Albania, Algeria, Anguilla, Angola, Antigua and Barbuda, Argentina, Aruba,  Bahamas, Bangladesh, Barbados, Bahrain, Belize, Belgium, Benin, Bermuda, Bulgaria, Bolivia, Bonaire, Sint-E. and Saba, Bosnia and Herzegovina, Botswana, Brazil, British Virgin Islands, Brunei Darussalam, Burkina Faso, Burundi, Bhutan, VietNam, Vanuatu, Vatican City, Venezuela, Armenia, Gabon, Guyana, Haiti, Gamia, Gambia, Ghana, Guatemala, Guinea, Gibraltar, Honduras, Hong Kong, Grenada, Greenland, Greece, Georgia, Denmark, Democratic Republic of the Congo, Jersey, Djibouti, Dominica, Dominican Republic, Ecuador, Eswatine, Estonia, Ethiopia, Egypt, Zambia, Zimbabwe, Jordan Indonesia, Ireland, Iceland, Spain, Italy, Cape Verde, Kazakhstan, Cayman Islands, Cambodia, Cameroon, Canada, Qatar, Kenya, Kyrgyzstan, China, Cyprus, Kiribati, Colombia, Comoros, Congo, Korea (Rep.), Costa Rica, Kot-d'Ivoire, Cuba, Kuwait, Curacao, Laos, Latvia, Lesotho, Lithuania, Liberia, Lebanon, Libya, Liechtenstein, Luxembourg, Myanmar, Mauritius, Mauritania, Madagascar, Macao, Malawi, Malaysia, Mali, Maldives, Malta, Morocco, Mexico, Mozambique, Moldova, Monaco, Monaco, Namibia, Nauru, Nepal, Niger, Nigeria, Netherlands, Germany, New Zealand, New Caledonia, Norway, UAE, Oman, Cook Islands, Pakistan, Palestine, Panama, Papua New Guinea, Paraguay, Peru, South Africa, Poland, Portugal, Republic of Chad, Rwanda, Romania, El Salvador, Samoa, San Marino, Saudi Arabia, Swaziland, Seychelles, Senegal, Saint Vincent and the Grenadines, Saint Kitts and Nevis, Saint Lucia, Serbia, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, United Kingdom of Great Britain and Northern Ireland, Sudan, Suriname, East Timor (Timor-Leste), USA, Sierra Leone, Tajikistan, Taiwan, Thailand, Tanzania (United Republic of), Togo, Tonga, Trinidad and Tobago, Tuvalu, Tunisia, Turkey, Turkmenistan, Uganda, Hungary, Uzbekistan, Uruguay, Faroe Islands, Fiji, Philippines, Finland, France, French Polynesia, Croatia, Central African Republic, Czech Republic, Chile, Montenegro, Switzerland, Sweden, Sri Lanka, Jamaica, Japan.

We also provide such metrological procedure: calibration, tare, graduated, testing of measuring instruments.

The online store takes an active part in such procedures as electronic bidding, tender, auction.

If there is no site in the descriptive information you need on the device you can always turn to us for help. Our qualified managers will update for you on the technical characteristics of the device from its technical documentation: user manual, certificate, form, operating instructions, diagram. If necessary, we will take a photo of your device, or a device stand. You can leave feedback on the unit purchased from us, the meter, the device, indicator, or product. Your review for your approval will be published on the site without contact information.

 

Description of the instruments taken from the technical documentation or technical literature. Most pictures of products made directly by our experts prior to shipment of goods. In the description of the device provided the main technical characteristics of the instrument: nominal measuring range, accuracy class, scale, supply voltage, size (size), weight. If the site you see the discrepancy device name (model) specifications, photo or documents attached - let us know - you will get a useful gift with-selling device.

 

While the need to clarify the overall weight and size or the size of the individual meter you can in our service center. If you need our engineers will help you choose the most complete analog or a suitable replacement for the device you are interested. All counterparts and replacement will be tested in one of our laboratories with the full compliance to your requirements.

In the technical documentation for each device or product, information is provided on the list and amount of precious metals content. The documentation gives the exact weight in grams of precious metals: Au gold, palladium Pd, platinum Pt, silver Ag, tantalum Ta and other platinum group metals (PGM) per unit item. These precious metals are found in nature in very limited quantities and therefore have such a high price.

On our website you can familiarize yourself with the technical characteristics of devices and obtain information on the content of precious metals in devices and radio components manufactured in the USSR. We draw your attention to the fact that often the actual content of precious metals differs by 10-25% from the reference one in a smaller direction! The price of precious metals will depend on their value and mass in grams.

All text and graphic information on the site is informative. The color, shade, material, geometric dimensions, weight, content, delivery set and other parameters of the goods presented on the site may vary depending on the batch of production and year of manufacture. Check with the sales department for more information.

 

If you can make repairs to the device yourself, our engineers can provide you with a complete set of necessary technical documentation: circuit diagram TO, ER, FD, PS. We also have an extensive database of technical and metrological documents: technical specifications (TS), the terms of reference (TOR), GOST (DSTU), the industry standard (OST) test procedure, the method of certification, verification scheme for more than 3,500 types of measuring equipment from the manufacturer this equipment. From the site you can download all the necessary software (the software driver) is required for the product purchased.

We carries out repairs and maintenance of measuring equipment in more than 75 different factories of the former Soviet Union and CIS.

We also have a library of legal documents that are related to our field of activity: the law, code, ordinance, decree, temporary position.