coaxial loads (E2-, E9-)
E2-148 coax line segment included a phase-shifting set of measures SWR and impedance I discharge EK9-140.
Length - 56,3 mm.
Error - (-0,015) mm.
E9-1 coaxial load - ultra high frequency element with normalized metrological characteristics or measures voltage standing wave ratio, reflection coefficient phase, and wave drag.
Frequency range - from 352 MHz to 666 MHz.
SWR - not more than 1,2.
Impedance - 75±3 Ohm.
More info ...
E9-13 coaxial load - ultra high frequency element with normalized metrological characteristics or measures voltage standing wave ratio, reflection coefficient phase, and wave drag.
More info ...
E9-130 load coaxial - ultra high frequency element with normalized metrological characteristics or measures voltage standing wave ratio, reflection coefficient phase, and wave drag.
More info ...
E9-135 load coaxial - ultra high frequency element with normalized metrological characteristics or measures voltage standing wave ratio, reflection coefficient phase, and wave drag.
More info ...
E9-135A load coaxial - ultra high frequency element with normalized metrological characteristics or measures voltage standing wave ratio, reflection coefficient phase, and wave drag.
More info ...
E9-13A coaxial load - ultra high frequency element with normalized metrological characteristics or measures voltage standing wave ratio, reflection coefficient phase, and wave drag.
Frequency - 30 MHz to 5000 MHz.
More info ...
E9-14 coaxial load - ultra high frequency element with normalized metrological characteristics or measures voltage standing wave ratio, reflection coefficient phase, and wave drag.
More info ...
Э9-14/2 нагрузка коаксиальная образцовая предназначена для настройки и поверки сверхвысокочастотной аппаратуры.
More info ...
E9-140 load coaxial measure can be used as a measure VSWR or impedance.
Included in the set of measures SWR and impedance 1 discharge EK9-140.
Frequency range - from 0 GHz to 4 GHz.
VSWR - 1,2±0,05.
More info ...
E9-141 load coaxial measure can be used as a measure VSWR or impedance.
Included in the set of measures SWR and impedance 1 discharge EK9-140.
Frequency range - from 0 GHz to 4 GHz.
VSWR - 1,4±0,05.
More info ...
E9-142 load coaxial measure can be used as a measure VSWR or impedance.
Included in the set of measures SWR and impedance 1 discharge EK9-140.
Frequency range - from 0 GHz to 4 GHz.
VSWR - 1,4±0,05.
More info ...
E9-143 load coaxial measure can be used as a measure VSWR or impedance.
Included in the set of measures SWR and impedance 1 discharge EK9-140.
Frequency range - from 0 GHz to 4 GHz.
VSWR - 2±0,05.
More info ...
E9-144 load coaxial measure can be used as a measure VSWR or impedance.
Included in the set of measures SWR and impedance 1 discharge EK9-140.
Frequency range - from 0 GHz to 4 GHz.
VSWR - 2±0,05.
More info ...
E9-145 agreed reference load enters the warehouse set up model and full wave resistance I discharge EK9-145 that apply:
- To check the devices for measuring the elements and circuits with distributed parameters with connector type III according to GOST 13317, GOST RV 51914;
- To measure the wave and impedance of radio in, antenna technology and microwave technology for laboratory and workshop conditions.
Frequency range - from 4 GHz to 18 GHz.
Value of wave impedance of the coaxial waveguide - 50±0,35 Ohm.
E9-146 load - mismatched load phase variable reflectance.
Included in the set-up and complete the wave resistance I of class EK9-145.
Frequency range - from 4 GHz to 18 GHz.
Value of wave impedance of the coaxial waveguide - 50±0,35 Ohm.
More info ...
E9-147 load - mismatched load phase variable reflectance.
Included in the set-up and complete the wave resistance I of class EK9-145.
Frequency range - from 4 GHz to 18 GHz.
VSWR - 1,4±0,05.
More info ...
E9-148 load - mismatched load phase variable reflectance.
Included in the set-up and complete the wave resistance I of class EK9-145.
Frequency range - from 4 GHz to 18 GHz.
VSWR - 1,4±0,05.
More info ...
E9-149 load - mismatched load phase variable reflectance.
Included in the set-up and complete the wave resistance I of class EK9-145.
Frequency range - from 4 GHz to 18 GHz.
VSWR - 1,4±0,05.
More info ...
E9-14А coaxial load - ultra high frequency element with normalized metrological characteristics or measures voltage standing wave ratio, reflection coefficient phase, and wave drag.
More info ...
E9-15 coaxial load - ultra high frequency element with normalized metrological characteristics or measures voltage standing wave ratio, reflection coefficient phase, and wave drag.
Frequency range - from 2000 MHz to 10000 MHz.
More info ...
E9-150 load - mismatched load phase variable reflectance.
Included in the set-up and complete the wave resistance I of class EK9-145.
Frequency range - from 4 GHz to 18 GHz.
VSWR - 1,4±0,05.
More info ...
E9-151 load - mismatched load phase variable reflectance.
Included in the set-up and complete the wave resistance I of class EK9-145.
Frequency range - from 4 GHz to 18 GHz.
VSWR - 1,4±0,05.
More info ...
E9-152 load - mismatched load phase variable reflectance.
Included in the set-up and complete the wave resistance I of class EK9-145.
Frequency range - from 4 GHz to 18 GHz.
VSWR - 2±0,05.
More info ...
E9-153 load - mismatched load phase variable reflectance.
Included in the set-up and complete the wave resistance I of class EK9-145.
Frequency range - from 4 GHz to 18 GHz.
VSWR - 2±0,05.
More info ...
E9-154 the load is used as a measure of impedance.
Included in the set-up and full wave resistance I discharge EK9-145.
Frequency range - from 4 GHz to 18 GHz.
VSWR - 2±0,05.
E9-159 load coaxial measure can be used as a measure VSWR or impedance.
Included in the set of measures SWR and impedance 1 discharge EK9-140.
Frequency range - from 0 GHz to 4 GHz.
VSWR - 1±0,025.
More info ...
E9-15A coaxial load - ultra high frequency element with normalized metrological characteristics or measures voltage standing wave ratio, reflection coefficient phase, and wave drag.
Frequency - 3000 MHz to 10000 MHz.
More info ...
E9-160 load coaxial measure can be used as a measure VSWR or impedance.
Included in the set of measures SWR and impedance 1 discharge EK9-140.
Frequency range - from 0 GHz to 4 GHz.
VSWR - 3±0,1.
More info ...
E9-161 load coaxial measure can be used as a measure VSWR or impedance.
Included in the set of measures SWR and impedance 1 discharge EK9-140.
Frequency range - from 0 GHz to 4 GHz.
VSWR - 3±0,1.
More info ...
E9-164 load is included in the set-up of coaxial standing wave ratio (VSWR) and the impedance of the 2nd category EK9-180.
Frequency range - from 0 GHz to 4 GHz.
VSWR - 1+0,05.
More info ...
E9-165 load is included in the set-up of coaxial standing wave ratio (VSWR) and the impedance of the 2nd category EK9-180.
Frequency range - from 0 GHz to 4 GHz.
VSWR - 1,2±0,05.
More info ...
E9-166 load is included in the set-up of coaxial standing wave ratio (VSWR) and the impedance of the 2nd category EK9-180.
Frequency range - from 0 GHz to 4 GHz.
VSWR - 1,4±0,1.
More info ...
E9-167 load is included in the set-up of coaxial standing wave ratio (VSWR) and the impedance of the 2nd category EK9-180.
Frequency range - from 0 GHz to 4 GHz.
VSWR - 1,4±0,1.
More info ...
E9-168 load is included in the set-up of coaxial standing wave ratio (VSWR) and the impedance of the 2nd category EK9-180.
Frequency range - from 0 GHz to 4 GHz.
VSWR - 2±0,1.
More info ...
E9-169 load is included in the set-up of coaxial standing wave ratio (VSWR) and the impedance of the 2nd category EK9-180.
Frequency range - from 0 GHz to 4 GHz.
VSWR - 2±0,1.
More info ...
E9-170 load is included in the set-up of coaxial standing wave ratio (VSWR) and the impedance of the 2nd category EK9-180.
Frequency range - from 0 GHz to 4 GHz.
VSWR - 3±0,2.
More info ...
E9-171 load is included in the set-up of coaxial standing wave ratio (VSWR) and the impedance of the 2nd category EK9-180.
Frequency range - from 0 GHz to 4 GHz.
VSWR - 3±0,2.
More info ...
E9-172 load is included in the set-up of coaxial standing wave ratio (VSWR) and the impedance of the 2nd category EK9-180.
Frequency range - from 0 GHz to 3 GHz.
VSWR - 1+0,05.
More info ...
E9-173 load is included in the set-up of coaxial standing wave ratio (VSWR) and the impedance of the 2nd category EK9-180.
Frequency range - from 0 GHz to 3 GHz.
VSWR - 1,2±0,05.
More info ...
E9-174 load is included in the set-up of coaxial standing wave ratio (VSWR) and the impedance of the 2nd category EK9-180.
Frequency range - from 0 GHz to 3 GHz.
VSWR - 1,4±0,1.
More info ...
E9-175 load is included in the set-up of coaxial standing wave ratio (VSWR) and the impedance of the 2nd category EK9-180.
Frequency range - from 0 GHz to 3 GHz.
VSWR - 1,4±0,1.
More info ...
E9-176 load is included in the set-up of coaxial standing wave ratio (VSWR) and the impedance of the 2nd category EK9-180.
Frequency range - from 0 GHz to 3 GHz.
VSWR - 2±0,1.
More info ...
E9-177 load is included in the set-up of coaxial standing wave ratio (VSWR) and the impedance of the 2nd category EK9-180.
Frequency range - from 0 GHz to 3 GHz.
VSWR - 2±0,1.
More info ...
E9-178 load is included in the set-up of coaxial standing wave ratio (VSWR) and the impedance of the 2nd category EK9-180.
Frequency range - from 0 GHz to 3 GHz.
VSWR - 3±0,2.
More info ...
E9-179 load is included in the set-up of coaxial standing wave ratio (VSWR) and the impedance of the 2nd category EK9-180.
Frequency range - from 0 GHz to 3 GHz.
VSWR - 3±0,2.
More info ...
Э9-2 нагрузка коаксиальная предназначена для поглощения мощности сигналов радиотехнических устройств.
Диапазон частот - от 352 МГц до 666 МГц.
Коэффициент стоячей волны по напряжению входа нагрузки с кабелем - не более 1,25.
More info ...
E9-20 load resistance is used as the equivalent of the termination.
More info ...
E9-21 load resistance is used as the equivalent of the termination.
More info ...
E9-22 load resistance is used as the equivalent of the termination.
More info ...
Э9-23 сопротивление реактивное применяется для измерения сопротивления, оказываемого переменному току электрической ёмкостью и индуктивностью цепи.
More info ...
Э9-24 сопротивление реактивное применяется для измерения сопротивления, оказываемого переменному току электрической ёмкостью и индуктивностью цепи.
More info ...
Э9-25 сопротивление реактивное применяется для измерения сопротивления, оказываемого переменному току электрической ёмкостью и индуктивностью цепи.
More info ...
Load coaxial E9-4 - the product to be used as the load lines and the high frequency generator.
Rated voltage - 100V.
Resistance - 75M. More info ...
Э9-71 нагрузка коаксиальная представляет собой сверхвысокочастотный элемент с нормируемыми метрологическими характеристиками или мерами коэффициента стоячей волны по напряжению, фазы коэффициента отражения, а также волнового сопротивления.
Волновое сопротивление мер - 50 Ом.
Погрешность КСВН - ±1%.
More info ...
E9-77 load - ultra high frequency element with normalized metrological characteristics or measures voltage standing wave ratio, reflection coefficient phase, and wave drag.
Frequency - from 0 GHz to 3 GHz.
E9-77/1 dummy load - test load with impedance.
Frequency range - from 0 MHz to 3000 MHz.
E9-8 load is used as load lines and high-frequency generators for adjusting the trial and disconnected with their actual load or fixed attenuator.
More info ...
E9-9 resistance load is used as the equivalent of a matched load, as well as fixed attenuator with the weakening power of 17 dB to 19 dB with a well-coordinated input and output.
Frequency Range - 30 MHz to 1000 MHz.
Input Impedance - 75 Ohm.
E9-94 coaxial load - ultra high frequency element with normalized metrological characteristics or measures voltage standing wave ratio, reflection coefficient phase, and wave drag.
More info ...
E9-9A load - ultra high frequency element with normalized metrological characteristics or measures voltage standing wave ratio, reflection coefficient phase, and wave drag.
Range - from 0 MHz to 3000 MHz.
SWR - from 1,15 to 1,45.
More info ...Sales department
Увага!
Due to the large number of incoming orders, in order to speed up their processing, new applications are accepted only at
Email, or via the
, or via the
Ukraine, Lviv
Gorodotskaya, 222
Mon-Fri 8:00 - 18:00
Our works(35)
Installation of the lodgement and the STM-15000U.01 stand
Connecting the brake stand STM-15000U
Connecting a low-profile stand STM-3500MN
Installation of a two-speed stand STM-15000U.01
Work on the installation of the line of maintenance of trucks
Poll
How did you find out about zapadpribor.com?
Products in this category
Leading online store Zapadpribor - a huge selection of measuring equipment for the best value and quality. So you can buy inexpensive devices, we monitor competitors' prices and are always ready to offer a lower price. We only sell quality products at the best prices. On our site you can buy cheaply as the latest innovations and proven equipment from the best manufacturers.
The site includes a special offer «buy at the best price» - if other Internet resources (bulletin board, forum or announcement of another online service) in products presented on our site, the lower price, we will sell it to you even cheaper! Buyers also additional discount for leaving a review or photo of use of our products.
In the price list contains not the whole range of products offered. Prices of goods, not included in the price list can learn to contact the manager. Also, our managers You can get detailed information about how cheap and profitable to buy instrumentation wholesale and retail. Telephone and e-mail for advice on the purchase , delivery or receipt are shown on the description of the goods. We have the most qualified staff, quality equipment and the best price.
Online store Zapadpribor - the official manufacturer's dealer test equipment. Our goal - selling high quality goods with best price offer and service to our customers. Our store can not only sell you the necessary instrument, but also offer additional services to its calibration, repair and installation. That you have a pleasant experience when shopping on our site, we have provided special gifts guaranteed to the most popular products.
We offer fast international shipping to almost every country in the world: Australia, Austria, Azerbaijan, Albania, Algeria, Anguilla, Angola, Antigua and Barbuda, Argentina, Aruba, Bahamas, Bangladesh, Barbados, Bahrain, Belize, Belgium, Benin, Bermuda, Bulgaria, Bolivia, Bonaire, Sint-E. and Saba, Bosnia and Herzegovina, Botswana, Brazil, British Virgin Islands, Brunei Darussalam, Burkina Faso, Burundi, Bhutan, VietNam, Vanuatu, Vatican City, Venezuela, Armenia, Gabon, Guyana, Haiti, Gamia, Gambia, Ghana, Guatemala, Guinea, Gibraltar, Honduras, Hong Kong, Grenada, Greenland, Greece, Georgia, Denmark, Democratic Republic of the Congo, Jersey, Djibouti, Dominica, Dominican Republic, Ecuador, Eswatine, Estonia, Ethiopia, Egypt, Zambia, Zimbabwe, Jordan Indonesia, Ireland, Iceland, Spain, Italy, Cape Verde, Kazakhstan, Cayman Islands, Cambodia, Cameroon, Canada, Qatar, Kenya, Kyrgyzstan, China, Cyprus, Kiribati, Colombia, Comoros, Congo, Korea (Rep.), Costa Rica, Kot-d'Ivoire, Cuba, Kuwait, Curacao, Laos, Latvia, Lesotho, Lithuania, Liberia, Lebanon, Libya, Liechtenstein, Luxembourg, Myanmar, Mauritius, Mauritania, Madagascar, Macao, Malawi, Malaysia, Mali, Maldives, Malta, Morocco, Mexico, Mozambique, Moldova, Monaco, Monaco, Namibia, Nauru, Nepal, Niger, Nigeria, Netherlands, Germany, New Zealand, New Caledonia, Norway, UAE, Oman, Cook Islands, Pakistan, Palestine, Panama, Papua New Guinea, Paraguay, Peru, South Africa, Poland, Portugal, Republic of Chad, Rwanda, Romania, El Salvador, Samoa, San Marino, Saudi Arabia, Swaziland, Seychelles, Senegal, Saint Vincent and the Grenadines, Saint Kitts and Nevis, Saint Lucia, Serbia, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, United Kingdom of Great Britain and Northern Ireland, Sudan, Suriname, East Timor (Timor-Leste), USA, Sierra Leone, Tajikistan, Taiwan, Thailand, Tanzania (United Republic of), Togo, Tonga, Trinidad and Tobago, Tuvalu, Tunisia, Turkey, Turkmenistan, Uganda, Hungary, Uzbekistan, Uruguay, Faroe Islands, Fiji, Philippines, Finland, France, French Polynesia, Croatia, Central African Republic, Czech Republic, Chile, Montenegro, Switzerland, Sweden, Sri Lanka, Jamaica, Japan.
We also provide such metrological procedure: calibration, tare, graduated, testing of measuring instruments.
The online store takes an active part in such procedures as electronic bidding, tender, auction.
If there is no site in the descriptive information you need on the device you can always turn to us for help. Our qualified managers will update for you on the technical characteristics of the device from its technical documentation: user manual, certificate, form, operating instructions, diagram. If necessary, we will take a photo of your device, or a device stand. You can leave feedback on the unit purchased from us, the meter, the device, indicator, or product. Your review for your approval will be published on the site without contact information.
Description of the instruments taken from the technical documentation or technical literature. Most pictures of products made directly by our experts prior to shipment of goods. In the description of the device provided the main technical characteristics of the instrument: nominal measuring range, accuracy class, scale, supply voltage, size (size), weight. If the site you see the discrepancy device name (model) specifications, photo or documents attached - let us know - you will get a useful gift with-selling device.
While the need to clarify the overall weight and size or the size of the individual meter you can in our service center. If you need our engineers will help you choose the most complete analog or a suitable replacement for the device you are interested. All counterparts and replacement will be tested in one of our laboratories with the full compliance to your requirements.
In the technical documentation for each device or product, information is provided on the list and amount of precious metals content. The documentation gives the exact weight in grams of precious metals: Au gold, palladium Pd, platinum Pt, silver Ag, tantalum Ta and other platinum group metals (PGM) per unit item. These precious metals are found in nature in very limited quantities and therefore have such a high price.
On our website you can familiarize yourself with the technical characteristics of devices and obtain information on the content of precious metals in devices and radio components manufactured in the USSR. We draw your attention to the fact that often the actual content of precious metals differs by 10-25% from the reference one in a smaller direction! The price of precious metals will depend on their value and mass in grams.
All text and graphic information on the site is informative. The color, shade, material, geometric dimensions, weight, content, delivery set and other parameters of the goods presented on the site may vary depending on the batch of production and year of manufacture. Check with the sales department for more information.
If you can make repairs to the device yourself, our engineers can provide you with a complete set of necessary technical documentation: circuit diagram TO, ER, FD, PS. We also have an extensive database of technical and metrological documents: technical specifications (TS), the terms of reference (TOR), GOST (DSTU), the industry standard (OST) test procedure, the method of certification, verification scheme for more than 3,500 types of measuring equipment from the manufacturer this equipment. From the site you can download all the necessary software (the software driver) is required for the product purchased.
We carries out repairs and maintenance of measuring equipment in more than 75 different factories of the former Soviet Union and CIS.
We also have a library of legal documents that are related to our field of activity: the law, code, ordinance, decree, temporary position.