Radiometric devices >> spectrum analyzers, noise analyzers

YA40-0830

15 000 RUB
8 200 UAH
available:
5 pieces

Online prices include VAT.

For order is possible effectively delivery of any quantity.
Indicator YA40-0830 (YA400830, YA40 0830, YA-40 830, YA 400830)
 
Indicator YA40-0830 is designed to monitor and measure the spectrum of the signals and power for plug-in units as part of a spectrum analyzer in the lab, shop floor and in control of repair.
Used only in sets of general application spectrum analyzers SK4-56, SK4-58, SK4-59, C4-60, C4-60/1, C4-60/2, SK4-61, SK4-62, SK4-63, SK4-64, SK4-65, SK4-66, SK4-67 and SK4-75.
 
Technical characteristics of the instrument lights YA40-0830:
 
Temperature - from 273K to 313K (0 º C to 40 º C);
Relative humidity - up to 95% at 303K (30 º C);
Atmospheric pressure - no less 460mm.rt.st.;
Mains voltage - 200V ± 10%;
Beam diameter within the graticule display device YA40-0830 - no more than 1mm;
Sensitivity of the channel Y-not less than 0.5 MHz;
The input resistance of the channel Y - 600 ohms ± 50 ohms;
Reduced error frequency of the instrument scale indicator YA40-0830 - does not exceed ± 4%;
Sensitivity of the channel X - 20del / V ± 2del / B;
The bandwidth of the channel X - not less than 100 kHz;
Input impedance instrument display channel X-YA40 0830 - 600 ohms ± 50 ohms;
Reduced error frequency scale - does not exceed ± 4%;
The device's 0V voltage indicator YA40-0830 input channel Z corresponds to the cutoff of the beam, and 1B - the nominal brightness of the beam;
The display mode image of the spectrum:
- Oscillographic;
- Periodic record during the course of direct and automatic deletion during reverse;
- Long-term memory, erasing the image button is X;
Parameters of the sources for power plug blocks the instrument indicator YA40-0830 corresponds to Table 1;
 
Table 1 Parameters of the sources to power the plug-in device units indicator YA40-0830
 
Voltage
Load current
Ripple
Control Point
Nominal value
Tolerance
Minimum
Maximum
 
 
200V
5%
2mA
15mA
300mV
SH10/20
50V
1%
100mA
200mA
1mV
SH10/18
12.6
1%
120mA
660mA
0.8 mV
SH10/16
5B
3.5
35mA
800mA
100mV
SH10/14
-12.6 In
1%
300mA
900mA
0.8 mV
SH10/15
-50V
1%
0 mA
200mA
1mV
SH10/17
~ 6.3 V
10.
60mA
60mA
-
SH10/13
 
Electrical parameters of the connector contacts for interfacing with inserted blocks correspond to table 2;
 
Table 2 Electrical parameters of the connector contacts the device indicator YA40-0830 for interfacing with inserted blocks
 
Jack
Contacts
Electrical parameter
Note
 
A
-12.6 In
Relative to the housing
SH9
2, 21, 22
Connected to the hull
 
 
3.4.
Interconnected
 
SH9
5.6.
Interconnected
 
 
7.8.
Interconnected
 
 
9.10.
Interconnected
 
 
11.12.
Interconnected
 
 
13, 14).
Interconnected
 
 
17, 18
Interconnected
 
 
19, 20
Interconnected
 
 
24
-12.6 In
Relative to the housing
SH9
26
12.6 in
Relative to the housing
 
16
-50V
Relative to the housing
SH10
3, 5, 19, 21
Connected to the hull
Relative to the housing
 
Connector pins SH7 and SH8, which have the same number are connected to each other;
The device LED YA40-0830 provides the specifications after the warm-up time of 1 hour;
Power - AC 220V ± 22V, 50Hz ± 0,5 Hz with harmonic content up to 5%;
The power consumed by the device indicator YA40-0830 from the network at a nominal voltage - less than 100 V ∙ A;
The indicator retains its specifications within the rules of working conditions, as well as after exposure to extreme conditions, followed by exposure to normal and working conditions for 4 hours;
MTBF indicator device YA40-0830 - at least 3800 hours;
The service life of 11 years;
Lifespan of 10,000 hours;
Dimensions of the device indicator YA40-0830 - 488h173h572mm;
Weight - 22kg.

Photos: YA40-0830

YA40-0830 indicator image.
YA40-0830 indicator image.
YA40-0830 front view.
YA40-0830 front view.
YA40-0830 side view.
YA40-0830 side view.
YA40-0830 rear view.
YA40-0830 rear view.
YA40-0830 overhead view.
YA40-0830 overhead view.
YA40-0830 bottom view.
YA40-0830 bottom view.


Яндекс цитирования