V7-37 V7-37 Voltmeter V7-37.
4.9 63

Voltmeter V7-37 (V737, V-7-37, V 7 37, b7-37, V-737, V 737, b737, b-7-37, b 7 37, b-737, b 737)

Designed to measure DC voltage, rms AC voltage sine wave, DC and AC current using external shunt electrical resistance.
Radiometric devices
voltmeters (V2-, V3-, V4-, V7-, V8-, V9-, F and others)

Price:

on request

 

Product information updated 27 December 2023.

Found cheaper?

Let us know. Our price is the best. 

Warranty:

12 months.

Warranty extension up to 5 years. 

Terms of delivery:

To all regions of the country, international delivery. 

Product information updated 27 December 2023.

Found cheaper?

Let us know. Our price is the best. 

Warranty:

12 months.

Warranty extension up to 5 years. 

Terms of delivery:

To all regions of the country, international delivery. 

Technical characteristics

Voltmeter V7-37 (V737, V-7-37, V 7 37, b7-37, V-737, V 737, b737, b-7-37, b 7 37, b-737, b 737)

Voltmeter V7-37 is designed to measure DC voltage, rms AC voltage sine wave, AC and DC with an external shunt electrical resistance.
Technical characteristics of the instrument voltmeter V7-37:
The operating conditions of use of the instrument:
The ambient temperature of - 10 º C to +40 ° C;
Relative humidity 80% at 25 ° C;
Atmospheric pressure from 86kPa to 106kPa (from 650mm.rt.st. 800mm.rt.st up.)
Mains supply 220V ± 22V 50Hz ± 0,5 Hz and harmonic content up to 5%;
The range of the measured device B7-37 DC voltage from 10 V to 1000 V -4 overlapping sub-bands 0.1, 1B; 10V 100V and 1000V;
The range of the device being measured AC voltage input jack from 10 mV to 1000 V 0.1 V overlapped sub-bands, 1V, 10V, 100V and 1000V. Measured range voltmeter V7-37 probe alternating voltage from 0.1 V to 1000 V overlaps sub-bands 1, 10V and 100V. By applying a voltage divider DN-519 (1:100) provided AC voltage measurement from 100V to 1000V;
The range of measuring devices with a DC shunt from 10 -8 A to 10A overlapping sub-bands 10uA, 100uA, 1mA, 10mA, 100mA, 1A and 10A. In all sub-bands at the current values ​​of equal sub-band upper limit of the measurement, the voltage drop is 0.1;
Measured range voltmeter V7-37 with AC shunt from 10 -8 A to 10A sub-bands overlap 10uA, 100uA, 1mA, 10mA, 100mA, 1A and 10A. In all sub-bands at the current values ​​of equal sub-band upper limit of the measurement, the voltage drop of 0.1 V;
The range of measured electrical resistance of 1 ohm to 10 megohms overlapping sub-bands 1 k, 10 k, 100 k, 1000 ohms and 10 megohms;
The quantization step (discrete) of the device on the first sub-band measurements:
- 10 -4 V - when measuring input jack DC and AC voltage;
- 10 -5 - when measuring probe;
- 1 ohm - measurement of the electric resistance;
- A 10 -8 - when measuring AC and DC;
B7-37 measures AC voltage within the following frequency ranges:
when measuring the input jacks:
- 20Hz-50kHz sub-bands at 0.1 V, 100 V;
- 20Hz-10kHz sub-band to 1000 V;
When measuring probe:
- 10 kHz to 1000 MHz sub-bands 1B-100B;
- 10 kHz-300MHz sub-band to 10V with a divider 1:100 DN-519 (up to 1000V);
Frequency calibration of B7-37:
- 1 kHz - when measuring input jack;
- 100 kHz - when measuring probe;
The normal range of frequencies:
- 45Hz-20kHz - when measuring the input jacks on the sub-bands in the 0.1-100V;
- 20Hz-10kHz - when measuring the input jacks on the sub-band 1000 V;
- 10kHz-50MHz - when measuring probe on the sub-band 1B-100B;
- 50kHz-50MHz - when measuring probe on the sub-band-splitter 10V DN-519;
Operating frequency range V7-37:
- 45Hz and 20Hz-20kHz-50kHz - when measuring the input jacks on the sub-bands in the 0.1-100V;
- 50 MHz-1000 MHz in the measurement probe on the sub-bands 1B-100B;
- 10 kHz, 50 kHz and 50 MHz-300 MHz - when measuring probe for sub-band 10 with a divider DN-519;
Voltmeter V7-37 shunt measures the alternating current in the frequency range from 20 Hz to 1 kHz;
The frequency of 1 kHz calibration;
The basic relative error of the instrument when measuring DC voltage does not exceed the values ​​calculated by the formulas:
- For subbands 0, 1V, 1V:
δ = ± [0,25 +0,2 (U a / U x -1)];
- The subband-10V-1000V:
δ = ± [0,5 +0,2 (U a / U x-1)]
where δ - the limit of relative error in%;
U to - the value of sub-band measurements in B;
U's - reading device in B;
The main relative error of V7-37 in normal frequency ranges do not exceed the values ​​calculated by the formulas given in Table. 1;
 
Table 1: Main relative error in the normal frequency regions
Frequencies
The limit of relative error
Sub-bands for voltage measurements
input jack
0.1V, 1V
10V, 100V
1000V
20Hz to 10kHz
-
-
± [1,5 + 0,2 (U a / U x-1)]%
from 45Hz to 20kHz
± [1,0 +0,2 (U a / U x-1)]%
± [1,5 + 0,2 (U a / U x-1)]%
-
from 10 kHz to 50 MHz
-
-
-
from 50 kHz to 50 MHz
-
-
-
Frequencies
The limit of relative error
Sub-bands for voltage measurements
probe 1V, 10V, 100V
probe with DN-519
20Hz to 10kHz
-
-
from 45Hz to 20kHz
-
-
from 10 kHz to 50 MHz
± [2,5 +0,5 (U a / U x-1)]%
-
from 50 kHz to 50 MHz
-
± [4 + (U a / U x-1)]%

Table. 1 δ - the limit of relative error in%;
U to - the value of sub-band measurements in B;
U's - reading device in B;
The main relative error of V7-37 with shunt measurement DC max values ​​calculated by the formulas:
- The subband-10uA, 100uA:
δ = ± [0,4 +0,2 (I a / I x-1)];
- The subband-1mA, 10mA:
δ = ± [0,6 +0,2 (I a / I x-1)];
- Subband 100mA 1A, 10A:
δ = ± [1 +0,2 (I a / I x-1)]
where δ - the limit of relative error in%;
I to - the value of sub-band measurements in A;
I's - the instrument reading in A;
The main relative error of V7-37 with a shunt in the measurement of alternating current does not exceed the values ​​calculated by the formulas:
- The subband-10uA, 100uA, 1m A, 10mA:
δ = ± [1,5 +0,2 (I a / I x-1)];
- For sub-bands 100mA, 1A, 10A:
δ = ± [2 +0,2 (I a / I x-1)];
where δ - the limit of relative error in%;
I to - the value of sub-band measurements in A;
I's - the instrument reading in A;
The main relative error of V7-37 to measure electrical resistance of not more than the values ​​calculated by the formulas:
- For sub-bands 1 k, 10 k, 100 k, 1000 k:
δ = ± [1 +0,2 (R a / R x -1)];
- For sub-band 10 MW:
δ = ± [1 +0,2 (R a / R x-1)]
where δ - the limit of relative error in%;
To R - value of sub-band measurements in ohms;
R's - reading device in ohms;
The relative error of the voltmeter V7-37 in the working frequency ranges when measuring AC voltage input jack does not exceed the values ​​calculated by the formulas given in Table. 1a.
 
Table 1a relative error in the working frequency ranges when measuring AC voltage input jack
Frequencies
The limit of relative error
Sub-bands for voltage measurements
0.1V, 1V, 10V, 100V
probe 1V, 10V, 100V
probe with DN-519
20Hz to 45Hz
from 20 kHz to 50 kHz
± [2,5 +0,2 (U a / U x-1)]%
-
-
± [6 + 4 (U a / U x -1)]%
± [10 + 4 (U a / U x -1)]%
from 10kHz to 50kHz
from 50MHz to 300MHz
-
-
-
-
-
-
from 50MHz to 600MHz
from 600MHz to 800MHz
-
-
± [6 +4 (U a / U x-1)]%
± [10 +4 (U a / U x-1)]%
-
-
from 800MHz up to 1000MHz
-
± [20 +4 (U a / U x-1)]%
-

Table. 1a δ - limit relative error in%;
U to - the value of sub-band measurements in B;
U's - reading device in B;
Change readings caused by changes in ambient temperature from normal to anyone within the working temperature range, no more than the limit value of basic error for every 10 ° C change in temperature;
The active input impedance V7-37:
- 10 MW ± 1 MW when measuring DC voltage, AC voltage input jack at the frequency of 45 Hz;
- Not less than 75 ohm - the measurement probe at a frequency of 100MHz;
- Not less than 100 ohms - when measuring probe with a divider DN-519 at a frequency of 100 MHz;
Input capacity does not exceed:
- 100pF - when measuring input jack;
- 1.5 pF - when measuring probe;
- 3pF - when measuring probe with a divider DN-519;
Time for reading voltmeter V7-37 does not exceed:
- 2c - V dc;
- 4c - when measuring AC voltage;
- 3c - the measurement of electrical resistance on the subbands 1 kW, 10 kW, 100 ohms and 1000 ohms;
- 10s - when measuring the electrical resistance in the sub-band 10 MW;
V7-37 retains its specifications within the standards after exposure to no more than ten-10s handling AC or DC voltage measurement input jack, but not more than 1,5 kV;
Warm-up time 15 min;
The device V7-37 suppresses the interference of normal form's AC Power frequency when measuring DC voltage of at least 35 dB at a voltage equal to ten times the noise sub-band sub-band to 0.1 V, 10 V and the value of the sub-band subband-1B, 100B. At the sub-band sum of the measured voltage 1000V and voltage noise should not exceed 1000 V;
Voltmeter retains its specifications when powered by AC 220V ± 22V, 50 Hz ± 0,5 Hz;
The total power consumption of the network at the maximum voltage does not exceed 30V ∙ A;
The active power consumed by the network at the maximum voltage does not exceed 20W;
V7-37 allows continuous operation under the operating conditions for 8h;
Overall dimensions - no more 248x86x282mm;
Weight - no more than 2.4 kg.
Rate the product: V7-37
Number of views: 1623
Product rating: 4.5
Number of grades: 312
* rating and all product statistics are updated once a month; information is current as of 08 January 2024

Photos V7-37

V7-37 (B7-37) device image.

V7-37 (B7-37) device image.

V7-37 (B7-37) front view.

V7-37 (B7-37) front view.

V7-37 (B7-37) side view.

V7-37 (B7-37) side view.

V7-37 (B7-37) rear view.

V7-37 (B7-37) rear view.

V7-37 (B7-37) overhead view.

V7-37 (B7-37) overhead view.

V7-37 (B7-37) bottom view.

V7-37 (B7-37) bottom view.

Leading online store Zapadpribor - a huge selection of measuring equipment for the best value and quality. So you can buy inexpensive devices, we monitor competitors' prices and are always ready to offer a lower price. We only sell quality products at the best prices. On our site you can buy cheaply as the latest innovations and proven equipment from the best manufacturers.

The site includes a special offer «buy at the best price» - if other Internet resources (bulletin board, forum or announcement of another online service) in products presented on our site, the lower price, we will sell it to you even cheaper! Buyers also additional discount for leaving a review or photo of use of our products.

In the price list contains not the whole range of products offered. Prices of goods, not included in the price list can learn to contact the manager. Also, our managers You can get detailed information about how cheap and profitable to buy instrumentation wholesale and retail. Telephone and e-mail for advice on the purchase , delivery or receipt are shown on the description of the goods. We have the most qualified staff, quality equipment and the best price.

 

Online store Zapadpribor - the official manufacturer's dealer test equipment. Our goal - selling high quality goods with best price offer and service to our customers. Our store can not only sell you the necessary instrument, but also offer additional services to its calibration, repair and installation. That you have a pleasant experience when shopping on our site, we have provided special gifts guaranteed to the most popular products.

 

We offer fast international shipping to almost every country in the world: Australia, Austria, Azerbaijan, Albania, Algeria, Anguilla, Angola, Antigua and Barbuda, Argentina, Aruba,  Bahamas, Bangladesh, Barbados, Bahrain, Belize, Belgium, Benin, Bermuda, Bulgaria, Bolivia, Bonaire, Sint-E. and Saba, Bosnia and Herzegovina, Botswana, Brazil, British Virgin Islands, Brunei Darussalam, Burkina Faso, Burundi, Bhutan, VietNam, Vanuatu, Vatican City, Venezuela, Armenia, Gabon, Guyana, Haiti, Gamia, Gambia, Ghana, Guatemala, Guinea, Gibraltar, Honduras, Hong Kong, Grenada, Greenland, Greece, Georgia, Denmark, Democratic Republic of the Congo, Jersey, Djibouti, Dominica, Dominican Republic, Ecuador, Eswatine, Estonia, Ethiopia, Egypt, Zambia, Zimbabwe, Jordan Indonesia, Ireland, Iceland, Spain, Italy, Cape Verde, Kazakhstan, Cayman Islands, Cambodia, Cameroon, Canada, Qatar, Kenya, Kyrgyzstan, China, Cyprus, Kiribati, Colombia, Comoros, Congo, Korea (Rep.), Costa Rica, Kot-d'Ivoire, Cuba, Kuwait, Curacao, Laos, Latvia, Lesotho, Lithuania, Liberia, Lebanon, Libya, Liechtenstein, Luxembourg, Myanmar, Mauritius, Mauritania, Madagascar, Macao, Malawi, Malaysia, Mali, Maldives, Malta, Morocco, Mexico, Mozambique, Moldova, Monaco, Monaco, Namibia, Nauru, Nepal, Niger, Nigeria, Netherlands, Germany, New Zealand, New Caledonia, Norway, UAE, Oman, Cook Islands, Pakistan, Palestine, Panama, Papua New Guinea, Paraguay, Peru, South Africa, Poland, Portugal, Republic of Chad, Rwanda, Romania, El Salvador, Samoa, San Marino, Saudi Arabia, Swaziland, Seychelles, Senegal, Saint Vincent and the Grenadines, Saint Kitts and Nevis, Saint Lucia, Serbia, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, United Kingdom of Great Britain and Northern Ireland, Sudan, Suriname, East Timor (Timor-Leste), USA, Sierra Leone, Tajikistan, Taiwan, Thailand, Tanzania (United Republic of), Togo, Tonga, Trinidad and Tobago, Tuvalu, Tunisia, Turkey, Turkmenistan, Uganda, Hungary, Uzbekistan, Uruguay, Faroe Islands, Fiji, Philippines, Finland, France, French Polynesia, Croatia, Central African Republic, Czech Republic, Chile, Montenegro, Switzerland, Sweden, Sri Lanka, Jamaica, Japan.

We also provide such metrological procedure: calibration, tare, graduated, testing of measuring instruments.

The online store takes an active part in such procedures as electronic bidding, tender, auction.

If there is no site in the descriptive information you need on the device you can always turn to us for help. Our qualified managers will update for you on the technical characteristics of the device from its technical documentation: user manual, certificate, form, operating instructions, diagram. If necessary, we will take a photo of your device, or a device stand. You can leave feedback on the unit purchased from us, the meter, the device, indicator, or product. Your review for your approval will be published on the site without contact information.

 

Description of the instruments taken from the technical documentation or technical literature. Most pictures of products made directly by our experts prior to shipment of goods. In the description of the device provided the main technical characteristics of the instrument: nominal measuring range, accuracy class, scale, supply voltage, size (size), weight. If the site you see the discrepancy device name (model) specifications, photo or documents attached - let us know - you will get a useful gift with-selling device.

 

While the need to clarify the overall weight and size or the size of the individual meter you can in our service center. If you need our engineers will help you choose the most complete analog or a suitable replacement for the device you are interested. All counterparts and replacement will be tested in one of our laboratories with the full compliance to your requirements.

In the technical documentation for each device or product, information is provided on the list and amount of precious metals content. The documentation gives the exact weight in grams of precious metals: Au gold, palladium Pd, platinum Pt, silver Ag, tantalum Ta and other platinum group metals (PGM) per unit item. These precious metals are found in nature in very limited quantities and therefore have such a high price.

On our website you can familiarize yourself with the technical characteristics of devices and obtain information on the content of precious metals in devices and radio components manufactured in the USSR. We draw your attention to the fact that often the actual content of precious metals differs by 10-25% from the reference one in a smaller direction! The price of precious metals will depend on their value and mass in grams.

All text and graphic information on the site is informative. The color, shade, material, geometric dimensions, weight, content, delivery set and other parameters of the goods presented on the site may vary depending on the batch of production and year of manufacture. Check with the sales department for more information.

 

If you can make repairs to the device yourself, our engineers can provide you with a complete set of necessary technical documentation: circuit diagram TO, ER, FD, PS. We also have an extensive database of technical and metrological documents: technical specifications (TS), the terms of reference (TOR), GOST (DSTU), the industry standard (OST) test procedure, the method of certification, verification scheme for more than 3,500 types of measuring equipment from the manufacturer this equipment. From the site you can download all the necessary software (the software driver) is required for the product purchased.

We carries out repairs and maintenance of measuring equipment in more than 75 different factories of the former Soviet Union and CIS.

We also have a library of legal documents that are related to our field of activity: the law, code, ordinance, decree, temporary position.