Equipment for service station >> equipment for SS UNIMETAL (Poland)

UNILINE QUANTUM 5000 UNIMETAL Line of technical control UNILINE QUANTUM 5000.

UNILINE QUANTUM 5000 UNIMETAL

available:
1 piece
For order is possible effectively delivery of any quantity.


Manufacturer: UNIMETAL
Country: Poland

 

Line of technical control UNILINE QUANTUM 5000 (UNILINEQUANTUM5000, UNILINE-QUANTUM-5000)

Line of technical control UNILINE QUANTUM 5000 is designed to test the vehicles weighing up to 3,5 tonnes and over, such as cars, vans, trucks, buses, tractors, trailers, vehicles with 4x4 drive.
Technical characteristics of the devices included in the technical control UNILINE QUANTUM 5000:
1) The roller brake tester RHE-30/6S
RHE-30/6S тормозной стенд
Designed to test the vehicles weighing up to 3,5 tonnes, including tractors, trailers, motorcycles and cars with 4x4 drive (recessed version).
GCW - 18t;
Range of braking forces - 0kN-30kN;
Control range of wheelbase - 900mm-2870mm;
Diameter bypass road wheels - 12"-33";
The range of measured pressure - 0MPa-1 MPa;
Pressure range of the brake pedal - 0N-1000N;
Engine power - 2x7,5kW;
The coefficient of adhesion of dry-wet tires tires - 0,9-0,7;
Peripheral speed roller brake tester device RHE-30/6S - 2,5 km/h, 5km/h;
Power - 3x400V;
2) The tester shock TUZ -1/L
TUZ-1/L тестер амортизаторов
Designed to test the effectiveness of the damping of the suspension system of vehicles weighing up to 3,5 tonnes (recessed version).
Maximum axle load for - 2t;
Maximum axle motion - 18t;
Measuring the size of plates - 640x274mm;
The amplitude of the vibrations - 6mm;
Frequency vibrations - 0Hz-24Hz;
Tread - 900mm-2200mm;
Power - 3x400V;
Testing method EUSUMA;
The device has a plastic lining for measuring plates, protection from dirt and moisture;
Internal safety mechanism device tester shock TUZ-1/L can test trucks without using extra padding;
3) Tester for a preliminary assessment of the wheel alignment UNC-8
UNC-8 тестер
Designed to test the vehicles weighing up to 3,5 tons and over (recessed version)
Maximum axle load for - 18t;
Measurement range - ±25mm;
Dimensions naezdnoy platform - 1000x870x140mm;
Platform appliance tester for a preliminary assessment of toe UNC-8 are made ​​of galvanized corrugated sheets, which ensures long term of the equipment;
The equipment is intended for preliminary evaluation toe front and rear axles
Just in the technical control UNILINE QUANTUM 5000 devices are listed in Table 1;
Table 1 Devices that are part of the technical control UNILINE QUANTUM 5000
Photo instrument
Device name
Identification of the machine
NM 5000 накладки
Overlay with the ability to test motorcycles and ATVs
NM 5000
Радиодатчик давления Radio automatic pressure in the pneumatic system  
BMS-100 датчик
The pressure sensor on the brake pedal
BMS-100
Пульт радиоуправления
Radio control damper tester
 
CJS блок управления
The central control unit with a computer All-in-one, A4 printer, keyboard and mouse
CJS
A list of options to the complex line inspector UNILINE QUANTUM 5000 is shown in Table 2;
Table 2: List of options to complex technical control line UNILINE QUANTUM 5000
Photo instrument
Device name
Identification of the machine
LCD дисплей
42 `` LCD display wall mount
LCD
DR-120 гидравлический прибор
Hydraulic device increases the load on the axle vehicle
DR-120
Система взвешивания
Weighing System
 
AUTOMAT программное обеспечение
Software to test 4x4, Automatic drive, allowing to test 4x4 cars, and cars with undivided bridges
AUTOMAT
Крышка
Cover for brake tester
 
The manufacturer guarantees that the quality of the complex line inspector UNILINE QUANTUM 5000 technical requirements specifications provided the customer terms and conditions of storage, transportation, installation, operation, and its specified operational documentation.


Яндекс цитирования