Wattmeter narrow profile TS1734 (TS 1734, TS-1734)
Indicating and signaling with LED indicator
Designed for active power measurement in three-phase mains frequency electrical systems 50, 60 and 400 Hz, including uneven and load phase, and also for signaling on the measured value of the field specified values.
Rated current: 5A, 10A, 20A, 30A, 50A, 75A, 100A, 150A, 200A, 300A, 400A, 600A, 750A, 800A, 1000A, 1500A, 2000A, 3000A, 4000A, 5000A, 6000A, 8000A, 10000A
Rated voltage: 127V, 220V, 380V
Wattmeter narrow profile TS1734 and signaling with LED indicators, designed to measure active power in 3-phase mains electrical installations at 50, 60 and 400 Hz, including those with non-uniform load phases as well as for signaling on the measured value of of the specified values.
Wattmeter narrow profile TS1734 consists of indicating device and additional devices R1818 / 2. Devices are programmable.
Wattmeter narrow profile TS1734 are designed for use on billboards and in panels of automatic control of technical devices and special facilities designed for continuous round the clock operation.
Wattmeter narrow profile TS1734 in a horizontal or vertical mounting, horizontal or respectively vertical arrangement of the scale, and can be mounted on panels and consoles from any angle with the horizon.
Discrete analog readout device, the number of LEDs - 52;
The pointer of the measured values - "bunny" or "column" (selected by the user when programming the device);
color for the signaling device varies depending on the position relative to the thresholds (green, yellow or red), the color of the displaying device: red, yellow, green (selected by the consumer when programming the device).
2 setting for signaling on the measured value of the defined zones;
lighting and electrical signaling;
programming device parameters provided by the customer using the control buttons and a 3-bit digital display located on top of the instrument.; on the digital display shows the numerical values of the measured values and parameters set, in this case is made:
Select the type of settings and their number (zero to two);
the task of setting values in increments of 1 scale division;
task switching differential setting;
the pointer of the measured value.
- Voltage 6 V AC, 50 or 400 Hz;
- 12 V DC or AC, 50 or 400 Hz;
- 24 V DC or AC, 50 or 400 Hz;
- 220 V AC, 50 or 400 Hz.
TS1734 device designations and additional devices:
In terms of resistance to interference power meters TS1734 meet the requirements of the execution group III and performance criteria B, GOST R50746.
Pressure ranges, nominal current and nominal voltage devices TS1734 with the zero mark on the edge of the range of indications are given in Table 1, the devices with the zero mark within the range of indications - in Table 2.
The inclusion of parallel chains on the 127 and 220 directly at 380 - or directly (for networks with a frequency of 50 Hz) via a voltage transformer 380/127 - depending on the order. The inclusion of sequential circuits - through current transformers with the secondary winding to 5 or 1 A or a current transformer with a secondary winding 5 A and intermediate transformers 5/1.
Table 1. The ranges of instrument with the zero mark on the edge of the display range.
Table 2. The ranges of instrument with the zero mark within the range of indications.