Equipment for maintenance checkup >> - the list of equipment for vehicle inspection >> equipment for inspection and auto service of the plant "GARO" >> testers backlash
Tester backlash TL 2000 is designed to control the backlash in the nodes of steering and suspension systems of vehicles of a maximum axle weight does not exceed 4000 kg.
Also, this tester can be called: TL2000, TL-2000.
Tester TL 2000 - is permanently installed platform consisting of a fixed plate and the movable stage. On the stove, anti-friction pads are placed. The platform moves around the rotary axis via the pneumatic cylinder rod. Tester is used in the production of n nevmotsilindr made by the Italian company PNEUMAX.
Appearance tester backlash TL 2000
Use a tester TL 2000 checks the following units of cars:
- Mount shock and support;
- Ball joint suspension;
- Engine mounting;
- A reference arm;
- Wheel bearing.
Parts of the vehicle, which are checked by the tester s TL 2000
Tester TL 2000 is installed on a pit and consists of a fixed platform that does not require deepening, the power supply, torch and terminal box. Use a tester a forced displacement of the front wheel of the vehicle suspension and visual definition of the relevant backlash. Moving the site and inspects the lighting arrangements by using the buttons on the lamp.
Technical characteristics of the devices testers backlash TL 2000
Ultimate load tester to the site - 2000 kg.
Speed limit travel - 3 km/h
Drive Type - Pneumatic.
Overall dimensions of the area - 790x630x27 mm.
Overall dimensions of the components of testers TL 2000
Platform - 870x850x200 mm.
Lantern - 190x110x120 mm.
Power supply - 80x60x 90 mm.
Box terminal - 120x140x55 mm.
Weight parts tester:
The platform - 90 kg.
Light - 0.35 kg.
Power Supply - 0.55 kg.
Terminal box - 0.45 kg.
Stroke center of the site in the direction of motion:
- Left / Right - at least 60 mm;
- Forward / backward - not less than 55 mm;
- Diagonally - not less than 80 mm.
Compressed air - from 0.6 MPa to 0.65 MPa.
AC line voltage - 220 V ± 10%
The frequency of the AC - 50 Hz ± 1%.
Class air GOST17433-80 - 10.
Power consumption - no more than 40 V·A.
Lifetime Tester - at least 5 years.
Net weight - 95 kg.
Maximum gross weight - 110 kg.
Operating conditions testers TL 2000
Ambient temperature - from +10 ° C to +35 ° C.
Relative humidity at 25 ° C - 80%.
The content of sulfur dioxide in the air - 250 mg/m3.
Chlorides in the air - 0.3 mg/m3.
Requirements for the installation tester TL 2000
The platform is mounted on the tester carefully lined floor to the left of the pit so that the air cylinder was placed on the left side of the car. And a source of pressurized air must be purified is not more than 3 m from the platform. To avoid mechanical damage to the tube which connects the source platform, it must be routed through a pipe or duct below the floor level.
In the vicinity of the platform should be is a niche that houses the terminal box and a flashlight. To set the box in the niche must be provided to the bar with four holes. At a distance of 4 m from the niche in the pit at a height of 200 mm to 300 mm from the floor must be placed in the socket 220 for power supply.
Inclusion and operation tester backlash TL 2000
- Switching power supply plug into the socket 220;
- The opening of a compressed air valve, setting pressure from 0.6 MPa to 0.65 MPa;
- Checking the lights and move the site using the buttons on the lamp;
- Arrivals diagnosed vehicle on site tester;
- The definition of the operator of a pit at the hearing and visually loosening knots and backlash in the joints.
Transportation and storage of testers:
Tester backlash air is supplied to the customer in the same box, whose dimensions are 960x960x300 mm. Transportation must be carried out in accordance with the requirements of GOST 23170-78 for the transport conditions C, and the "Technical conditions of loading and securing of loads" and "General special rules for the transport of goods."
Before the installation testers TL 2000 should be stored in the original package at a temperature range of +5 ° C to +40 ° C and relative humidity of 80% at +25 ° C. In confined spaces should be dust, corrosive gases, vapors, acids, alkalis, and other harmful substances.
The warranty period from the date of sale - 12 months.
The requirements and application instructions contain technical documentation that comes with the tester.
Scope of supply tester TL 2000
Platform - 1 pc.
Lantern - 1 pc.
Box terminal - 1 pc.
Power supply - 1 pc.
Screw - 1 piece.
Dowel - 1 pc.
The documentation set - 1 pc.
Photos for tester backlash TL 2000
Photos of using tester backlash TL 2000
TL 2000 tester backlash usage examples.
TL 2000 tester backlash usage examples.