Radiometric devices >> belongings to the selective voltmeters SMV

TK 11 (ТК 11)

available:
5 pieces
For order is possible effectively delivery of any quantity.

Probe TK 11

Also, this device can be called: TK11, TK-11, тк 11, тк11, тк-11.

TK 11 probe used for low resistance measurement asymmetrical interference voltages at high current lines.

In combination with selective microvoltmeter type SMV 11 probe measures the voltage interference on individual conductors of electrical appliances, with operating current of at least 25 A.

Specifications TK 11:

Frequency range - from 0,15 MHz to 30 MHz.

Limit measured voltage - from 0 V to 3 V.

Series resistor - 150 Ohm.

Protective capacitor - 5 pF.

Load - 75 Ohm.

Absolute value of TK 11:

- Not less than 0,15 MHz - less than 390 Ohm;

- At least 1 MHz - 150±20 Ohm.

Phase angle probes:

- Not less than 0,15 MHz - from -68° to -5°;

- At least 1 MHz - from -30° to 10°.

Voltage at the entrance:

- The maximum - 250 (0 Hz/50 Hz);

- Test - 1500 V (50 Hz).

Login - test clamp A 25 TTL 0-43 806.

Output - RF socket TTL 200-3800.

Protective earth conductor - screw clamp on TGK 0-43 806

Weight - 0,2 kg.

Dimensions - 40x40x100 mm.

Temperature range - from -10° C to +45° C.

The maximum relative humidity - 95%.

Mode of operation of the probe - continuous.

Protection class - I TGL on 14283/07.

The manufacturer provides a guarantee of compliance probe TK 11 all technical requirements if the consumer terms and conditions of use, storage and transportation, installed documentation manuals.

Photos: TK 11 (ТК 11)

TK 11 probe image.
TK 11 probe image.
TK 11 probe image.
TK 11 probe image.
TK 11 front view.
TK 11 front view.
TK 11 side view.
TK 11 side view.
TK 11 rear view.
TK 11 rear view.
TK 11 overhead view.
TK 11 overhead view.
TK 11 bottom view.
TK 11 bottom view.


Яндекс цитирования