Equipment for maintenance checkup >> - the list of equipment for vehicle inspection >> equipment for inspection and auto service of the plant "GARO" >> brake testers STS

Brake tester STS-16U-SP-11 + $ 5 000 in GIFT (devices for state technical checkup).

1 305 000 RUB

available:
2 pieces

Online prices include VAT.

For order is possible effectively delivery of any quantity.
    Brake stand STS-16U-SP-11 is designed to monitor the efficiency of the service and parking brake systems, as well as stability under braking cars vans and mini trucks, including all-wheel drive, axle load to travel up to 16 tons.

$ 10 000
as a gift for
brake stand STS
    The action "Brake stand STS by factory price + set of equipment for inspection for free" !

    You had discount more than 15% from cost of brake stand. Your savings are to 318 200 RUB. (complete set of equipment for inspection), depending on the selected stand STS.

    Valid time and the number of gift sets are limited.

    More details available here...
or contact our sales department by phone:
    (495) 374-54-18.

    Also this Brake Tester can be called: STS16USP11, STS 16U JV 11, STS-16USP11, 16USP STS-11, USP 11 STS16, ctc-16y-cp-11, ctc16ycp11, ctc 16y cp 11.

    Wheel diameter (bus) from 520 mm to 1300 mm.
    The inner / outer ends of the roller brake tester - STS-16U-SP-11 800/2800 mm.
 
    Specifications brake testers STS-16U-SP-11       

    Measuring range force generated on the control of brake system - N. 100-1000
    Measuring range of braking force (one wheel) - 0-40 kN.
    The initial braking speed on the stand - 2.2, 4.4 km / h
    Power supply - 3x380 V, 50 Hz.
    The installed capacity of electric equipment - 19 kW.
    The maximum power measured maximum brake force for 10 - 55 kW.
    Operating temperature range - from +5 ° C to +35 ° C.
    The range of air pressure in pneumatic actuator - 0-1 MPa.
    A possible option plan STS-16U-SP-11
STS-16U-SP-11 brake tester option plan.

   
Brake stand STS-16U-SP-11
operates on the principle of compulsory rotation of the wheel axis of the vehicle diagnosed by the support rollers and measuring the forces that occur on the surface under braking. After checking out videos on the axis of the support device of weighing the same diagnosed axis. The effort that applies the brake control, vymeryat special sensor. Calculation of total specific brake force and the coefficient of axial non-uniformity of the software is held, which receives data on the weight of the axle and the braking force of each wheel.

   
Foundation plan of the stand STS-16U-SP-11
STS-16U-SP-11 brake tester foundation plan.

    Supplied brake testers STS-16U-SP-11

    Frame foundation - 1 piece.
    The support device - 1 piece.
    Wardrobe power - 1 piece.
    Weighing System - 1 piece.
    Module 4 WD - 1 piece.
    Remote Control Set - 1 piece.
    The force sensor on the control TC - 1 piece.
    Instrument rack SP-6 - 1 piece.
    The bridge - 2 pcs.;
    Chock - 2 pcs.;
    Set the PC - Optional consumer;
    Tool set for checking the stand - Optional consumer.
 
    Brake stands STS-16U-SP-11 are equipped with high-quality and durable items.
    The base frame of the stand is the foundation, which serves to fasten it to the vehicle mounting power racks, tensioners and other devices that allow the hydraulic body changes.
STS-16U-SP-11 tester frame foundation.

     Strain gauge sensors provide highly accurate mass measurements of the vehicle.

STS-16U-SP-11 brake tester gauges.

     There are also a series of one-piece stands STS. Two pairs of gear motor located in the center of the roller unit.
 
STS-16U-SP-11 brake tester piece series STS stands.


    Motor unit brake tester.

     Transfer of force from the motor to the drum roller provides a powerful steel chain.
STS-16U-SP-11 brake tester strong steel chain.

     Rollers stand
STS-16U-SP-11 coated metal spot welding SmG (Sooth Grip), thereby ensuring the value of the coefficient of friction 0,8-0,7 (dry. / humidity.).
    Objectivity is implemented measurements obtained through the correct size diameter rollers. Roller diameter is selected and calculated in such a way that the tire contact patch, located on the brake stand, was identical to the contact patch with the road. Due to the classical scheme of arrangement of rollers reduces the error in the measurement of the braking force.
    Different versions of the coating rollers:

    Opportunities for exploitation stands STS-16U-SP-11 in transport companies, as elements of the technical control centers and service stations, power grids are not connected to the networks of residential houses.

    The features and technical advantages of the stands Brake STS-16U-SP-11

    1. Measurement mode automatic.
    2. Self-diagnostic system.
    3. The possibility of diagnosing wheel drive vehicles (together with the module 4WD, with spot welding rollers SmG, the module auto-lock clips).
    4. The ability to measure parameters such as response time, braking system resistance force unbraked wheels, specific brake force; ellipse wheel brake drums, brake force coefficient of uneven wheels on one axle, the relative difference between the axis of the wheel brake forces.
    5. The soft launch of rollers.
    6. The lack of power floorstanding cabinet.
    7. Stands STS-16U-SP-11 Direct Transfer diagnostic results to a PC.
    8. Having the ability to print the diagnostic results.
    9. Ability to resupply technical control.
    10. The presence of dynamic weighing.
    11. Possibility to control measurements with a PC or remote control.
    12. Reduced noise.
    13. The presence of fixing rollers for easy exit the vehicle from the stand.
    14. The possibility of completion shall stand tester suspension and withdrawal tester.
    15. The possibility of completion shall stand devices for inspection.
    For long-term operation of stands STS-16U-SP-11, as well as excellent build quality and appearance of the stands they have to meet the following requirements:
    - All parts and components must be secured without distortions, durable;
    - Threaded connections must be secured against loosening and no damage;
    - On the inscriptions on the panels should not be sagging paint, broken lines and no visible difference in thickness;
    - Electroplating and coatings must be durable, smooth, with no scratches or cracks.
    Stands brake STS-16U-SP-11 after passing through the initial calibration can be taken into operation with the provision of the warranty is 12 months from the first day of admission to operation, but no later than 15 months from the date of sale.
    The warranty period may be extended by another 12 months in the case of a contract for service products.
    The requirements and application instructions contain technical documentation that comes with the stand. Also, the product provides all the necessary certificates.
    Installation, commissioning and training of staff on the stand, STS-16U-SP-11 are performed under a separate contract and are not included in the cost of equipment.

Photos for tester STS-16U-SP-11

STS-16U-SP-11 brake tester.
STS-16U-SP-11 brake tester.
STS-16U-SP-11 brake tester option plan.
STS-16U-SP-11 brake tester option plan.
STS-16U-SP-11 brake tester foundation plan.
STS-16U-SP-11 brake tester foundation plan.
STS-16U-SP-11 brake tester gauges.
STS-16U-SP-11 brake tester gauges.
STS-16U-SP-11 brake tester piece series STS stands.
STS-16U-SP-11 brake tester piece series STS stands.
STS-16U-SP-11 brake tester motor unit.
STS-16U-SP-11 brake tester motor unit.
STS-16U-SP-11 brake tester strong steel chain.
STS-16U-SP-11 brake tester strong steel chain.
STS-16U-SP-11 brake tester different coverage options rollers.
STS-16U-SP-11 brake tester different coverage options rollers.
STS-16U-SP-11 brake tester usage examples.
STS-16U-SP-11 brake tester usage examples.
STS-16U-SP-11 brake tester usage examples.
STS-16U-SP-11 brake tester usage examples.
STS-16U-SP-11 brake tester usage examples.
STS-16U-SP-11 brake tester usage examples.
STS-16U-SP-11 brake tester usage examples.
STS-16U-SP-11 brake tester usage examples.

Photos of using tester STS-16U-SP-11

STS-16U-SP-11 brake tester usage examples.
STS-16U-SP-11 brake tester usage examples.
STS-16U-SP-11 brake tester usage examples.
STS-16U-SP-11 brake tester usage examples.
STS-16U-SP-11 brake tester usage examples.
STS-16U-SP-11 brake tester usage examples.
STS-16U-SP-11 brake tester usage examples.
STS-16U-SP-11 brake tester usage examples.
STS-16U-SP-11 brake tester usage examples.
STS-16U-SP-11 brake tester usage examples.


Яндекс цитирования