Equipment for maintenance checkup >> - the list of equipment for vehicle inspection >> equipment for inspection and auto service of the plant "GARO" >> brake testers STS

Brake tester STS-10U-SP-11N + 2 500$ in GIFT (devices for state technical checkup).

1 600 000 RUB

1 piece

Online prices include VAT.

It is possible effectively delivery of any quantity.

technical documentation brake testers STS-10U-SP-11N:

STS-10U-SP-11N passport.


[doc, 567kB]
5 000$ as a gift to  brake stands STS. $ 5 000
as a gift for
brake stand STS
    The action "Brake stand STS by factory price + set of equipment for inspection for free" !

    You had discount more than 10% from cost of brake stand. Your savings are to 315 500 RUB. (complete set of equipment for inspection), depending on the selected stand STS.

    Valid time and the number of gift sets are limited.

    More details available here...
or contact our sales department by phone:
    (495) 374-54-18.


    Brake stand STS-10U-SP-11N is designed to monitor the efficiency of the service and parking brake systems, as well as stability under braking cars, trucks, buses and trucks with axle loads up to 10 tons.
    Also this Brake Tester can be called: STS10USP11N, STS 10U JV 11 N, STS-10U-SP11N, STS-10USP-11H, 11H STS10 USP.
    The design feature of the brake tester STS-10U-SP-11N, which distinguishes it from the stand STS-10U-SP-11 is a lower height and the length of the support device of the stand, allowing you to reduce the depth of the foundation and perform multiple installation of stand on prepared foundations in different premises.
    Wheel diameter (bus) - from 520 mm to 1300 mm.
    The inner / outer ends of the rollers - 800/2800 mm.

    Specifications brake testers STS-10U-SP-11N
Parameter name
In the diagnosis of ATC
relative error,%
The initial braking speed, simulated on the bench, not less
4.4 km/h
2.2 km/h
Meter braking force (for one wheel)
1.6 kN
3-30 kN
± 3%
Measuring force exerted on the control of brake system
300 - 1000 H
± 4%
Range measuring the weight of each weighting device
100-1000 kg
500-5000 kg
± 3%
The range of air pressure in pneumatic actuator
0.2-1 MPa
± 3%
Powered by a three-phase alternating current:
- Supply
- Frequency
50 Hz
± 10%
± 1%

    The installed capacity of electric equipment - 19 kW.
    The range of measurement of weight - up to 10 000 kg.
    Axles - no more than 10.
    The maximum power measured maximum brake force for 10 - 55 kW.
    Operating temperature range - from +5 ° C to +35 ° C.
    Supplied brake testers STS-10U-SP-11N:

    Frame foundation - 1 piece.
    The support device - left and right;
    Wardrobe power - 1 piece.
    Weighing System - 1 piece.
    Module 4 WD - 1 piece.
    Remote Control Set - 1 piece.
    The force sensor on the control TC - 1 piece.
    Sensor measuring the pressure in the pneumatic actuator - 1 piece.
    Instrument rack SP-6 - 1 piece.
    The bridge - 2 pcs.;
    Chock - 2 pcs.;
    Set the PC - Optional consumer;
    Tool set for checking the stand - Optional consumer.
    Brake stand STS-10U-SP-11N after passing the initial calibration can be put into operation with the provision of the warranty is 12 months from the first day of admission to operation.
    The warranty period may be extended by another 12 months in the case of a contract for service products.
    The requirements and application instructions contain technical documentation that comes with the stand. Also, the product provides all the necessary certificates.

Photos for tester STS-10U-SP-11N

STS-10U-SP-11N brake tester roller.
STS-10U-SP-11N brake tester roller.