Modulation measurer SK3-49 (SK349, SK3 49, ck3-49, ck3 49, ck349)
To measure the signal parameters of communications equipment, generators measuring the modulation parameters to configure and control communications equipment.
Carrier frequency range RF signal when measuring modulation parameters 0,1-2499 MHz
Modulating frequency range in the AM mode, FM 0,02-200 kHz
Measurement range 0,005-1000 kHz frequency deviation
The limits of measurement of the AM 0.1-100%
Measurement range of the phase modulation index of 1-100 rad
Modulation measurer SK3-49 is designed to measure the signal communications equipment, generators measuring the modulation parameters to configure and control communications equipment for mass production and operation, for the verification and certification of test oscillators for modulation parameters: AM factor setting error and frequency deviation, harmonic distortion of amplitude and frequency modulation.
Modulation measurer SK3-49 can be used to create measurement systems, as well as for the development, adjustment of various wireless devices in laboratories, workshops, repair and calibration of.
Modulation measurer SK3-49 is a combined device and provides simultaneous measurement of complex parameters:
-Measurement of peak and RMS values of the coefficient of amplitude modulated RF signals;
-Measurement of peak and RMS values of the frequency deviation and phase modulation index RF signals;
-Measurement of rms voltage and power RF signals;
-Measurement of the frequency of the RF input signal;
Measuring the frequency-modulation signal envelope;
-Measurement of the harmonics of the signal envelope modulation.
Device Features modulation measurer SK3-49:
A wide-range of measured parameters and a small error of measurement;
-Versatile - Simultaneous measurement of seven parameters of the signal;
Auto-tuning for all measured values - the carrier frequency, RF input voltage, automatic selection of the measuring range of scales, automated measurement of the harmonic envelope of the modulation signal;
High-performance measurements - the typical setup time is 1-2s, and the measurement cycle of seven parameters 1c;
-Possibility of the device in the measuring system via RS-232;
Application-embedded single-board industrial computer running Windows XP Embedded;
-Bright, color LCD display provides simultaneous display of all measured parameters in real time, there is an additional ability to connect to an external CRT display device;
A wide-range of service options - averaging measurements, mathematical processing and noise compensation in the low-noise measurement mode, the ability to measure the signal power up to 50 watts, internal calibration, etc.
Modulation measurer SK3-49 meets the requirements of GOST 22261 and GOST 50095-92 in parts of the metrological characteristics, and operating conditions apply to group 3 GOST 22261.