Electrical measuring instruments >> analog panel meters >> shunts >> others shunts

shunt 75SHP

2 144 RUB
900 UAH
available:
110 pieces

Online prices include VAT.

For order is possible effectively delivery of any quantity.
Shunt 75SHP 75-SHP, 75 SHP)
 
75SHP shunt is designed to expand the limits of the measurement and recording devices featuring DC.
 
Technical characteristics of the instrument shunts 75SHP:
 
Designed to expand the limits of the measurement and recording devices featuring DC.
Rated current shunt devices 75SHP: 5A, 10A, 20A, 30A, 50A, 75A, 100A, 150A, 200A, 300A, 500A, etc.
Accuracy class - 0.2;
Nominal voltage drop at any limit of measurement - 75mV;
Shunt 75SHP 0,3-0,75 has:
- The limit of measurement - 0.3 A-0, 75A;
- Nominal impedance - 0.25640 ohm-0, 10 260 ohms;
- A lot - 0,190;
- Cross cable - 1.0 mm 2;
Shunt 75SHP 1,5-7,5 has:
- The limit of measurement - 1.5 A-7, 5A;
- Nominal impedance - 0.05025 ohm-0, 01 005 ohms;
- Weight - 0,200 kg;
- Cross cable - 1.5 mm 2;
Shunt 75SHP 15-30 is:
- The limit of measurement - 15A-30A;
- Nominal impedance - 0.00500 ohm-0, 00 250 ohms;
- Weight - 0.230 kg;
- Cross cable - 6.0 mm 2;
Shunt 75SHP 75 has:
- The limit of measurement - 75A;
- Nominal impedance - 0.00100 ohms;
- Weight - 0.240 kg;
- Cable cross-sections - 20.0 mm 2;
Shunt 75SHP 150 has:
- The limit of measurement - 150 A;
- Nominal impedance - 0.00050 ohms;
- Weight - 0.265 kg;
- Cable cross-sections - 40.0 mm 2;
Limits of variation values ​​of shunt resistance, which appears as a result of thermoelectric power under normal load current is equal to half the maximum permissible basic error;
Acceptable basic error limit product 75SHP shunt caused by ambient temperature deviation from the normal to any temperature within the limits established working conditions of application, ± 0,1% for every 10 º C temperature change;
The insulation between the electrical circuit and a shunt housing must withstand for 1 minute action of the test voltage 2kV nearly sinusoidal and the frequency of 50 Hz;
The insulation resistance between the body and isolated dc electric circuits shunt 75SHP product must be not less than:
- 40 MW - in the normal conditions of use;
- 5 MW - at 50 º C and relative humidity of 80%;
- 2 MW - at an ambient temperature of 20 º C ± 5 º C and relative humidity of 95%;
- 0.5 MW - an ambient temperature of 60 º C and relative humidity of 95%;
Dimensions of the product shunt 75SHP - 120h60h60mm;
The service life to failure - not less than 12 years.

Photos shunt 75SHP

Shunt 75ShP shunt image.
Shunt 75ShP shunt image.
Shunt 75ShP side view.
Shunt 75ShP side view.
Shunt 75ShP overhead view.
Shunt 75ShP overhead view.


Яндекс цитирования