Caliper SHCK-1-150 0.01 mm (0.02 mm) with analog indicator (SHCK1150, SHCK 1 150, SHCK-1 150, SHCK 1-150)
Caliper SHCK-1-150 0.01 mm (0.02 mm) with a needle indicator designed to measure the external and internal dimensions.
Count on a circular dial gauge.
Details calipers are made of corrosion resistant steel or have a reliable anti-corrosive coating.
Scale bar and have a vernier satin chrome finish, eliminating glare.
This caliper Type I - two with the depth gauge.
Also caliper SHTSK-1-150 0.01 mm (0.02 mm) with a needle indicator may be indicated:
- SHCK-150 0.01 mm (0.02 mm) Type 1, I, i;
- SHCK-I-150 0.01 mm (0.02 mm);
- SHCK-i-150 0.01 mm (0.02 mm).
Product Specifications Calipers SHCK-1-150 0.01 mm (0.02 mm) with a pointer indicator:
Size caliper products SHCK-150 0.01 mm (0.02 mm) with a needle indicator - 150mm;
The graduation - 0.01 mm (0.02 mm);
Caliper SHCK-1-150 0.01 mm (0.02 mm) with a needle indicator - a tool that consists of a stiff metal ruler, called the bar, a frame with a vernier and measuring jaws.At the bar there are markings with a scale of 0.5 mm, and the vernier scale interval - 0.02 mm;
With the help of a special screw is fixed to the risks of the line. Measuring the sponge can be upper and lower. The upper jaws are required to perform internal measurements, most often it is the hole in the details, the lower jaw are used for the external dimensions of products;
The product has a built-in depth gauge;
On the product caliper SHCK-150 0.01 mm (0.02 mm) with analog indicator is very easy to work with.In the process of measuring the lower jaw to the side of divorce, the jaws have a piece, and then have to move the jaw to lock. In the process of measuring the shift in the upper jaw parts, after entering into the hole, which is measured, and there is disclosed a sponge;
Working with the product caliper SHCK-1-150 0.01 mm (0.02 mm) with a needle indicator should try to keep the tool perpendicular to the details, then the sponge will fall close to the surface of the measurand.According to the main scale and vernier are the results of measurements;
The product is indispensable for some problems of measurement;
The manufacturer guarantees the product quality caliper SHCK-150 0.01 mm (0.02 mm) with analog indicator with the technical specifications in compliance with the conditions of the consumer terms and conditions of storage, transportation, installation, operation, established specifications and operational documentation.
Photos: SHCK-1-150 0,01mm (0,02mm)