Reading device Shch1480/I
Also, this device can be called: Shch-1480/I, Shch 1480/I, Shch1480-I, Shch-1480-I, Shch-1480 I.
Reading device Shch1480/I designed for counting of meter reading digital tachometer SCH1480.
Device designed in a rectangular cast aluminum housing splash-proof. Depending on the measuring range on the right side indicating device on the glass has the inscription x10 rev / min or rev / min. Behind the glass is clouded filter, and on the back wall are two output terminal to another element of the meter tachometer digital - converter Shch1480/I, and the earth screw designation. The body includes a digital board with four lamps.
For mounting on a board on the side surfaces of the housing is provided with two circular recess into which the inserts, which stem in the opposite direction of the shield.
Connecting Shch1480/I made so. First, the device must be attached to the panel by installing the liner in the two side notches cut into the housing board. Be sure to check that the inserts were rotated 90 ° so that the plane of each column of them was as far away from the shield, while remaining parallel to the board. Strengthening with screws and spring washers should be such that the ends of the latter rested on the plane of the shield.
The result is displayed on the indicating device as follows: first to appear zeros, then - count corresponding to the upper limit of measuring the digital meter.
Device designed to oper at an ambient temperature of 0 ° C to 40 ° C and relative humidity of 98% at 40 ° C.
Dimensions Shch1480/I - 120x80x10 mm 2.
Mounting dimensions - 110x70 mm.
Weight - not more than 1 kg.