Rotameter RM-0,63GUZ (RM0,63GUZ, RM 0,63 GUZ, RM-0,63-GUZ, RM0,63-GUZ, RM0,63 GUZ)
Flowmeter - Flowmeter constant pressure drop with a float freely in the unit. Consists of a set in the casing cone (rotametricheskoy) tube, which moves inside the float.
Type flowmeters with local indication of the RM with a glass tube rotametricheskoy designed to measure the volumetric flow smoothly varying uniform flow of clean and low contaminated liquids with dispersed inclusions of foreign particles, as well as for measuring the volumetric flow rate of air and gases.
Depending on the flow of the medium, such as flowmeters RM produced by the manufacturer in four basic versions: RM-A, RM-II, RM-IV, RM-VI, but not in 7, as many technical manuals and documentation for a number of the manufacturer (not produced a model of the RM-I, RM-III, RM-V).
Each base has changed a unified rotametricheskuyu up. Measuring Range spending for these models are obtained by setting the appropriate float. In the manufacture of floats at different ranges are used 12X18H9T steel, Teflon-4 alloy D1T, ebonite.
Scale readings conditional uniform, applied directly to rotametricheskuyu up. Countdown evidence produced by the upper edge of the float.
Ambient pressure should not exceed 6kgs/sm 2 (0.6 MPa).
Flowmeters are designed to operate at a temperature of the measured and the environment from 5 º C to 50 ° C, humidity 30% to 80%.
The basic permissible error rotameters model RM-A is ± 4%, while the other models, ± 2,5% of full scale value.
Calibration of Rotameters - individually made by the manufacturer on the water or air. For other environments, it is necessary to recalculate the flow of water or air at a given measured liquid or gas.
Technical characteristics of the devices rotameters RM-0,63GUZ.
The upper limit of measurement - 0.63 m 3 / h;
Material floats instrument rotameter RM-0,63GUZ - D1T alloy;
Material of the inner reinforcement - LS-59-1, steel 12X18H9T;
Nominal diameter - 6 mm;
The connection device rotameter RM-0,63GUZ the pipeline - 11.5 mm threaded or threaded M10x1;
Dimensions - 320h27, 7mm;
Unit weight rotameter RM-0,63GUZ - 0.4 kg.