Radioactivity indicator RADEKS RD1008 (RD-1008 RD 1008)
Radioactivity indicator RADEKS RD1008 is designed to detect the presence of ionizing radiation and estimate the values of ambient dose equivalent, ambient dose equivalent rate of photon (gamma - and X-ray) ionizing radiation and the density of beta-particles flux.
The product has the following features:
- Simultaneous evaluation of ambient gamma radiation dose rate and flux density of beta-particles;
- Evaluation of the accumulated dose for two users;
- Continuous assessment with the specification of the result;
- Fast, automatic restart after a sudden change in dose or radiation flux density;
- The estimate of dose rate and particle flux density of the background radiation (radiation in the open);
- Indication of unit radioactivity indicator RADEKS RD1008 on the display background values obtained;
- Display can exceed the measured value of dose rate and particle flux density above background values;
- The measurement unit of radioactivity indicator RADEKS RD1008 is reduced with increasing dose;
- Increase the number of measurement cycles leads to an increase in the reliability of evidence;
- Change in the threshold signal for gamma and beta radiation;
- Definition of the indicator unit of radioactivity RADEKS RD1008 gamma-radiation dose to the registration time of measurement;
- Used to indicate the sound or vibration;
- Can be installed calibration coefficients.
Technical characteristics of the instrument lights radioactivity RADEKS RD1008:
The range of dose rate measurement - 0.1 mkZv/ch-999mkZv/ch;
The range of flux density measurement - 6 1 / (cm 2 ∙ min) -999 1 / (cm 2 ∙ min);
The range of measurement instrument radioactivity indicator RADEKS RD1008 dose - 0,001 mSv-999mkZv;
Energy range of registered:
- Photon ionizing radiation - 0.05 MeV-3, 0MeV;
- Beta-radiation - 0.05 MeV-3, 5MeV;
The random error of the instrument indicator of radioactivity RADEKS RD1008 at P = 0.95 (reproducibility indicated):
- Dose rate - no more than ± (15 3 / N)%, where h - dose in mSv / h;
- Flux density - less than ± (20 200 / P)%, where F - flux, 1/cm 2 ∙ min;
- Dosage - no more than 15%;
The range of thresholds for audible alarm device radioactivity indicator RADEKS RD1008:
- Dose rate - 0.20 mkZv/ch-1, 20mkZv / h;
- Flux density - 10 1 / (cm 2 ∙ min) -120 1 / (cm 2 ∙ min);
Time measurement unit of radioactivity indicator RADEKS RD1008:
- Dose rate - 1c-21c, (1)
- Flux density - 21c;
Power - the element size "AA" 1pc.;
Time of continuous operation of the device indicator radioactivity RADEKS RD1008 - not less than 950 hours, (2)
Dimensions - 140x64x26mm no more;
Unit weight indicator radioactivity RADEKS RD1008 (without batteries) - not more than 0.175 kg;
(1) The measurement time depends on the dose. Increasing the number of measurement cycles leads to the reliability of testimony by vysheniyu;
(2) Continuous operation of the device indicator radioactivity RADEKS RD1008 when the batteries with a capacity of 3100mAch, with the natural background level shall not exceed 0.30 mSv / h, and factory settings of the product;
The manufacturer guarantees the quality of the instrument indicator of radioactivity RADEKS RD1008 technical requirements specifications, subject to the consumer the terms and conditions of storage, transportation, installation, operation, established specifications and operational documents.
|Sales departments LLC "Zapadpribor"
|1008 RUB||in stock:||4195 RUB||in stock:|
|370 UAH||5781 pieces||1145 UAH||20 pieces|
|1328 RUB||in stock:||4195 RUB||in stock:|
|487 UAH||2640 pieces||1145 UAH||23 pieces|
|1014 RUB||in stock:||5000 RUB||in stock:|
|372 UAH||2784 pieces||1250 UAH||15 pieces|
|2213 RUB||in stock:||5680 RUB||in stock:|
|487 UAH||1635 pieces||1420 UAH||18 pieces|
|1109 RUB||in stock:||5380 RUB||in stock:|
|394 UAH||3143 pieces||1345 UAH||21 pieces|
Built-in printer and a keyboard, memory, transfer data to a computer
Wheatstone bridge, resistance box measure, the resistance coils:
Attention! Delivery of all instruments, which are listed on the site, is on the whole territory of the following countries: Russia, Ukraine, Belarus, Kazakhstan and other CIS countries.
According to Russia, there is an established system of delivery to cities: Moscow, St. Petersburg, Surgut, Nizhnevartovsk, Omsk, Perm, Ufa, Norilsk, Chelyabinsk, Novokuznetsk, Cherepovets, Almetyevsk, Volgograd, Lipetsk, Magnitogorsk, Togliatti, Kogalym Kstovo New Urengoy Nizhnekamsk, Nefteyugansk, Nizhny Tagil, Khanty-Mansiysk, Yekaterinburg, Samara, Kaliningrad, Nadym, Noyabrsk, Vyksa, Nizhny Novgorod, Kaluga, Novosibirsk, Rostov-on-Don, Upper Pyshma, Krasnoyarsk, Kazan, Naberezhnye Chelny, Murmansk, Vsevolozhsk Yaroslavl, Kemerovo, Ryazan, Saratov, Tula, Usinsk, Orenburg, Novotroitsk, Krasnodar, Ulyanovsk, Izhevsk, Irkutsk, Tyumen, Voronezh, Cheboksary, Neftekamsk, Novgorod, Tver, Astrakhan, Novomoskovsk, Tomsk, Prokopyevsk, Penza, Urai, Pervouralsk , Belgorod, Kursk, Taganrog, Vladimir, Neftegorsk, Kirov, Bryansk, Smolensk, Saransk, Ulan-Ude, Vladivostok, Vorkuta, Podolsk, Krasnogorsk, Novouralsk, Novorossiysk, Khabarovsk, Zheleznogorsk, Kostroma, Zelenogorsk, Tambov, Stavropol, Svetogorsk, Zhigulevsk , Arkhangelsk and other cities of the Russian Federation.
Ukraine has a well-established on the delivery system in the cities: Kiev, Kharkov, Dnepr (Dnepropetrovsk), Odessa, Donetsk, Lviv, Kiev, Nikolaev, Lugansk, Vinnitsa, Simferopol, Kherson, Poltava, Chernihiv, Cherkasy, Sumy, Zhytomyr, Kirovohrad, Khmelnytsky, Rivne, Chernivtsi, Ternopil, Ivano-Frankivsk, Lutsk, Uzhgorod and other cities of Ukraine.
On Belarus there organized system of delivery to cities: Minsk, Vitebsk, Mogilev, Gomel, Mozyr, Brest, Lida, Pinsk, Orsha, Polotsk, Grodno, Zhodino Molodechno and other cities of Belarus.
In Kazakhstan there is an established system of delivery to cities of Astana, Almaty, Ekibastuz, Pavlodar, Aktobe, Karaganda, Uralsk, Aktau, Atyrau, Arkalyk, Balkhash, Zhezkazgan Kokshetau Kostanai, Taraz, Shymkent, Kyzylorda, Lisakovsk, Shakhtinsk, Petropavlovsk, reader, Ore, Families, Taldykorgan, Temirtau, Ust-Kamenogorsk and other cities of Kazakhstan.
Ongoing delivery of devices to such countries: Azerbaijan (Baku), Armenia (Yerevan), Kyrgyzstan (Bishkek), Moldova (Chisinau), Tajikistan (Dushanbe), Turkmenistan (Ashgabat), Uzbekistan (Tashkent), Lithuania (Vilnius), Latvia (Riga ), Estonia (Tallinn), Georgia (Tbilisi).
LLC «Zapadpribor» - a huge selection of measuring equipment for the best value and quality. So you can buy inexpensive devices, we monitor competitors' prices and are always ready to offer a lower price. We only sell quality products at the best prices. On our site you can buy cheaply as the latest innovations and proven equipment from the best manufacturers.
The site includes a special offer «buy at the best price» - if other Internet resources in products presented on our site, the lower price, we will sell it to you even cheaper! Buyers also additional discount for leaving a review or photo of use of our products.
In the price list contains not the whole range of products offered. Prices of goods, not included in the price list can learn to contact the manager. Also, our managers You can get detailed information about how cheap and profitable to buy instrumentation wholesale and retail. Telephone and e-mail for advice on the purchase , delivery or receipt are shown on the description of the goods. We have the most qualified staff, quality equipment and the best price.
LLC «Zapadpribor» - the official manufacturer's dealer test equipment. Our goal - selling high quality goods with best price offer and service to our customers. Our company can not only sell you the necessary instrument, but also offer additional services to its calibration, repair and installation. That you have a pleasant experience when shopping on our site, we have provided special gifts guaranteed to the most popular products.
Plant «META» - is the most reliable manufacturer of equipment for inspection. Brake stand STM produced on this plant.
Manufacturer TM «Infrakar» - a manufacturer of multifunction devices gas analyzer and smoke meter.
If there is no site in the descriptive information you need on the device you can always turn to us for help. Our qualified managers will update for you on the technical characteristics of the device from its technical documentation: user manual, certificate, form, operating instructions, diagram. If necessary, we will take a photo of your device, or a device stand.
You can leave feedback on the unit purchased from us, the meter, the device, indicator, or product. Your review for your approval will be published on the site without contact information.
Description of the instruments taken from the technical documentation or technical literature. Most pictures of products made directly by our experts prior to shipment of goods. In the description of the device provided the main technical characteristics of the instrument: nominal measuring range, accuracy class, scale, supply voltage, size (size), weight. If the site you see the discrepancy device name (model) specifications, photo or documents attached - let us know - you will get a useful gift with-selling device.
While the need to clarify the overall weight and size or the size of the individual meter you can in our service center. If you need our engineers will help you choose the most complete analog or a suitable replacement for the device you are interested. All counterparts and replacement will be tested in one of our laboratories with the full compliance to your requirements.
Our company carries out repairs and maintenance of measuring equipment in more than 75 different factories of the former Soviet Union and CIS. We also provide such metrological procedure: calibration, tare, graduated, testing of measuring instruments.
If you can make repairs to the device yourself, our engineers can provide you with a complete set of necessary technical documentation: circuit diagram TO, ER, FD, PS. We also have an extensive database of technical and metrological documents: technical specifications (TS), the terms of reference (TOR), GOST (DSTU), the industry standard (OST) test procedure, the method of certification, verification scheme for more than 3,500 types of measuring equipment from the manufacturer this equipment. From the site you can download all the necessary software (the software driver) is required for the product purchased.
We also have a library of legal documents that are related to our field of activity: the law, code, ordinance, decree, temporary position.
Upon request, each measuring device is provided metrological certification or verification. Our staff can represent your interests in such organizations as the metrological Rostest (Rosstandart), State Standard, Derzhspozhiv standard (Derzhspozhivstandart), TSLIT, OGMetr.
Sometimes customers can enter our company name wrong - for example, zapadprybor, zapadprylad, zapadprіbor, zapadprilad, zahіdpribor, zahіdprіbor, zahidpribor, zahidprilad, zahidprіbor, zahidprybor, zahidprylad. That's right - Zapadpribor or zahіdprilad.
LLC "Zapadpribor" is the supplier of ammeters, voltmeters, power meters, frequency meters, phase meters, shunts and other devices such manufacturers of measuring equipment, such as: PO " Elektrotochpribor " (M2044, M2051), Omsk, OAO "Instrument-Making Plant "Vibrator" (M1611, Ts1611), St. Petersburg, JSC "Krasnodar ZIP " (E365, E377, E378), LLC " ZIP Partner" (Ts301 , Ts302 , Ts300) and "ZIP" Yurimov"(M381, C33), Krasnodar, OAO "VZEP" ("Vitebsk factory of electrical appliances") (E8030, E8021), Vitebsk, OAO "Electropribor" (M42300, M42301, M42303, M42304, M42305, M42306), Cheboksary, JSC "Elektroizmeritel" (Ts4342, Ts4352, Ts4353 ) Zhitomir, PJSC "Uman factory "Megger" (F4102, F4103, F4104, M4100), Uman.
© 2005 - 2016 LLC "Zapadpribor".
All rights reserved.