Discount up to 50% on the panel devices.

Laboratory equipment >> tensile testing machines

R-5 Breaking machine P-5.


It is possible effectively delivery of any quantity.
Breaking Machine R-5 (R5, R 5)
Tearing machine R-5 is designed to test samples of wire, metal belts, rubber, plastics, rubber and textile yarn tensile and compressive test, the laboratory-type facilities.
Technical characteristics of the devices bursting machine R-5:
Maximum limit load - 50kN;
Type of device siloizmeritelya breaking machine R-5 - the pendulum;
Variation of indications - 1% of the measured load;
Scale reading device siloizmeritelya - 0.02 kN, 0.05 kN, 0.10 kN;
The height of the workspace - 400mm/400mm;
Measuring range of active movement of the capture device breaking machine R-5 - 0mm-700mm;
Measuring range of active movement of the rate of capture - 1.0 mm-10mm/10mm-100mm;
Scale measuring the velocity of the active capture - 0.2 mm/min/2mm/min;
Dimensions of working space, when tested in compression - 290h35h145mm;
The range of load measuring device breaking machine R-5:
- 1 range - 2kN-10kN;
- 2 range - 5kN-25kN;
- 3 range - 10kN 50kN-;
Power supply breaking machine R-5 - 380V, 50Hz;
Power consumption - 2 kW;
Dimensions of the device breaking machine R-5 - 710h1400h2065mm;
Weight - 790kg;
The manufacturer guarantees the quality of the device breaking machine R-5 requirements of technical specifications in compliance with the conditions of the consumer terms and conditions of storage, transportation, installation, operation, established specifications and operational documentation.