Laboratory equipment >> tensile testing machines

R-100 Testing machine R-100.

R-100

For order is possible effectively delivery of any quantity.
    Testing machine R-100 (R100, R 100, p-100, p100, p 100)
    Testing machine R-100 is designed for static testing of standard samples of metals in tension at 20 º C ± 15 º C.
    In the application of additional devices to the test vehicle can be tested for compression, and bending.
    In the basic configuration testing machine tensile test provides:
      - Cylindrical samples of types VI, VII;
      - Cylindrical samples with head type. III № 1 ... 5;
     - Flat samples of types I, II;
     - Hardness of samples up to 42 HRC.
    Testing machine provides:
      - Deformation of the samples to destruction;
      - Measurement of the load, displacement and deformation of the active capture (with Manning machines with strain gauges);
     - Maintenance of the loading rate;
      - Record the load moving active capture and strain;
      - Electrical output to a computer or digital printing of the load and displacement of the active capture.
    Technical characteristics of the devices testing machine R-100:
    The highest load limit - 1000kN;
    Drive type - Hydraulic;
    Type siloizmeritelya device testing machine R-100 - torsion;
    The number of load ranges - 3;
    Measuring ranges of loads:
    - 40kN, 200kN - Graduation 0.4 kN;
    - 100kN, 500kN - Graduation 1.0 kN;
    - 2000kN, 1000kN - Graduation 2.0 kN;
    Range of loading rates - 1kN/s-100kN/s;
    Measuring range of movement of the active capture device testing machine R-100 - 0.1 mm-340 mm;
    Measurement limit strain - up to 5mm;
    Working stroke of active capture - at least 340 mm;
    Velocity of the active capture device testing machine R-100 without load - 3mm/min-100mm/min;
    The maximum permissible errors in the direct measurement of the load during the (loading) of the measured load, starting with the highest limit of each range, but the range of 0.1 to 0.2 the maximum limit of the first range does not exceed the absolute permissible error at 0.2 - ± 1%;
    Span deflection load does not exceed the measured loads from 0.1 to the maximum limit of each range, but in the range from 0.1 to 0.2 the maximum limit of the first range does not exceed the absolute value of the scope of permissible at 0.2 - 1%;
    Limit of permissible variations of reading testing machine R-100 (the difference between reading the forward and backward strokes) is less than the measured loads ranging from 0.1 to the maximum limit of each range, but in the range from 0.1 to 0.2 the maximum limit value of the first range does not exceed the permissible variations in the absolute point of 0.2 - 2%;
    The maximum permissible errors record load in each range of measurement of rate from 0.1 maximum limit load, but in the range from 0.1 to 0.2 the maximum limit of the first range does not exceed the absolute permissible error at 0.2 - ± 2%;
    Maximum permissible error in the measurement of displacement active capture device testing machine R-100 in the range:
    - 0.1 mm to 1.0 mm - ± 0,02 mm;
     - From 1.0 mm to 340 mm - ± 2%;
    Limit of acceptable error in recording movements active capture device testing machine R-100:
     - Over 30mm - ± 3%;
     - Up to 30mm - ± 1 mm;
    The maximum permissible errors recording the deformation of the upper limit of each range of strain gauge, determine the scope and size of the field record, expressed in an appropriate scale - ± 2%;
    The limits of acceptable error of the device testing machine R-100, while maintaining the loading rate on the stage of elastic deformation of the sample in the range of 0.2 to 0.65, the highest value of each load range of the given rate of loading - ± 20%;
    The limits of acceptable change in load over 30s after the termination load changes from 0.2 maximum limit of each range - ± 1% of the variable load;
    The limits of acceptable change in load over 30s after the termination load changes from 0.2 maximum limit of each range when working with a stabilizer for 30 minutes - ± 2% of the variable load;
    Playback range of movement device tenzokalibratora testing machine R-100 - 0mm-25mm;
    The maximum permissible errors tenzokalibratora motion playback:
    - When you move up to 0.3 mm - less than ± 1,5 mm;
     - If you move more than 0.3 mm - ± 0,5%;
    Scale deformation records provided recorder device testing machine R-100:
      - For units with a base measuring 25 mm, measuring range 2.5 mm - 100:1, 250:1, 500:1;
     - For units with a base measuring 50 mm, measuring range 5mm - 50:1, 125:1, 250:1;
     - For units with a base measuring 100 mm, measuring range 10mm - 25:1, 62,5:1, 125:1;
    Scale recording movements active capture device testing machine R-100 - from 1:1 to 50:1;
    Nominal dimensions of length coordinate recording chart:
    - The coordinates of X (displacement, strain) - not less than 350 mm;
    - Coordinates Y (load) - 250mm;
    Usable height appliance testing machine R-100 with a tensile test, including the installation and stroke grabs - at least 980 mm;
    Distance from the sample to the column - 420mm;
    Range of captured samples:
     - Cylindrical - diameter 10mm-60mm;
    - Flat - thickness 5mm-50mm;
    The diameter of the threaded head designs - M30, M36, M45, Tr30x3;
    The maximum diameter of the threaded section of the sample heads - 25mm;
    The maximum diameter of the cross section of samples with cylindrical heads - 28mm;
    Power settings tool testing machine R-100 - 380V, 50Hz;
    Power consumption - 3.7 kW;
    Oil Capacity - 100L;
    Dimensions of the device testing machine R-100 - 2970h1930h4590mm;
    Deepening below floor level - 650mm;
    Mass of devices testing machine R-100 - no more than 7200kg;
    The working space of the testing machine allows the heat and cryochamber and produce mechanical testing various components and parts;
    Provides a record of the chart in the coordinates: the load-displacement, load-deformation, load-time, displacement-time, strain-time;
    Measurement unit of the device testing machine R-100 has access to the external connector The twelve binary code corresponding to the load and displacement;
    Load measurement is carried out on a sample of the pressure in the working cylinder with torsion siloizmereniya;
    For displacement active capture device testing machine R-100 by means of displacement transducer, which converts the movement of rail-related walking beam into an electrical signal induced in millimeters;
    Control speed deviation from the desired load by means of displacement transducer and the indicator to show the deviation of the actual percentage rate of loading of the preset adjuster;
    Recording chart is performed using a recording device;
    In the apparatus testing machine R-100 includes:
      - The device is loaded with hydraulic slips;
      - Control, including the installation of a pump, electric equipment, torsion siloizmeritel, the unit of measurement, the instrument recording the two coordinate N307 / 1;
      - Replacement Parts Kit, a set of tools and accessories, spare chpstey;
     - Adaptation Xg 6,894,020 for mechanical testing of samples in compression;
    Optionally the device testing machine R-100 can be equipped with:
     - Adjusted Xg 6.894.023-02 mechanical test samples for bending;
      - Adjusted NB 6,894,037 for tensile test specimens with cylindrical head and shank;
    The manufacturer guarantees that the quality of the device testing machine R-100 technical requirements specifications provided the customer terms and conditions of storage, transportation, installation, operation, and its specified operational documentation.


Яндекс цитирования