Equipment for maintenance checkup >> - the list of equipment for vehicle inspection >> measuring backlash steering

Rotators PU-3.5 for passenger cars Rotators PU 3.5.

Rotators PU-3.5 for passenger cars

8 pieces
For order is possible effectively delivery of any quantity.
Rotators PU-3.5 (PU3.5, PU 3.5)
Rotators PU-3.5 for vehicles over 3.5 tons per axle used during the inspection in accordance with the requirements of DSTU 3649-97 (paragraph6.6.2) when measuring backlash steering vehicles, the measurement of effort on the steering wheel during the procedure, "alignment" with other service work on wheeled vehicles and farm equipment. Set IP consists of two identical rotary devices, which rye always used in pairs.
Rotator PU-3.5 consists of two parts.The first (lower) part - this is a fixed metal base. The second (top) - it's a circle that has two axes of freedom, but also may perform rotational motion. Between the two parts of the device are five special wear-resistant bearings, which provide free lift of the upper circle. Between the bearings and the bottom part is a metal plate made of hardened steel 30KhGSA (GOST 11 269), which protects the lower base of the deformation under the influence of ball bearings. This prolongs the life of the rotary device several times.
Rotary devices for transporting IP-3.5 in product design provides U-shaped handle.To make the upper range of fixed during transportation, use special blockers progress.
Technical characteristics of the instrument rotators CP-3.5:
IP-3, 5
lowered the weight of one of the car, which is installed on the rotary unit PU, kg
Longitudinal shift, mm
± 25mm
Transverse shear, mm
± 29mm
Rotational motion, deg.
0 º -360 º
Overall dimensions rotators PU-3.5
Width, mm
length, mm
Height, mm
Weight devices rotators PU-3.5 kg
11.5 kg
To ensure the highest level of service, purchase price rotators which will pleasantly surprise you.
To buy the rotary device PU-3.5, contact our sales department by phone +38-032-243-09-31 Mob.+38-050-370-90-07.

Яндекс цитирования