Motor PL-072 V3 IM1001 150W 24V 1350 r/min.
Engine PL-072 V3 IM1001 150W 24V 1350 r/min - DC commutator motor, which is normally used as a drive for the different mechanisms and devices used in continuous operation, including equipment for life support in railway transport.
Supply voltage 24V.
Rated power 150W.
Rotational speed 1350 r/min.
Design on way of installation - IM1001.
Productivity factor of the device - 62.5%.
Engine weight - 7.85 kg.
Interpretation of marking PL-072 V3 IM1001 150W 24V 1350 r/min
- PL - DC motor with a molded;
- 07 - size;
- 2 - number of core length of anchor;
- U3 - climatic version and category according to GOST 15150-69;
- IM1001-constructive mounting arrangement according to GOST 2479-79.
Overall, mounting and connecting the motor features of PL-072 V3 IM1001 150W 24V 1350 r/min
- PL-072 V3 IM1001 150W 24V 1350 r/min are made with insulation class A;
- Degree of protection IP20 motors GOST 17494-72;
- The design of the engine - Safety Standard 12.2.007.0-75, 12.2.007.1-75;
- The requirements of fire safety - GOST 12.1.004-85.
Overall and mounting dimensions of the motors are shown in Fig. 1.
Fig. 1. Overall and mounting dimensions of the motors PL-072 V3 IM1001 150W 24V 1350 r / min
Technical characteristics of the PL-072 V3 IM1001 150W 24V 1350 r/min
Engine operation PL-072 V3 IM1001 150W 24V 1350 r / min - intermittent (S3) with a duty cycle (dc) of 15%. Direction of rotation - in both directions.
Tolerance RPM ± 20% of nominal value. Allowable increase the speed that the motor can withstand the PL-072 V3 IM1001 150W 24V 1350 r / min (without damage and permanent deformation) - 1.5 times the nominal value within 2 minutes.
Permissible overload current after the establishment of a conventional thermal mode - 1.5 times the nominal value within 2 minutes.
The average sound level devices PL-072 V3 IM1001 150W 24V 1350 r/min corresponds to the requirements of Class 1 in accordance with GOST 16372-77. The average level of vibration - the requirements of class 4.5 in accordance with GOST 16921-83. Values exceeding the maximum permissible level for winding temperature - 65 ° C, bearings - 50 ° C, body - 30 ° C.
Warranty life motor PL-072 V3 IM1001 150W 24V 1350 ob/min- 10,000 hours. Guaranteed service life of engines for domestic use - 2 years from the start of use.
Electric PL-072 V3 IM1001 150W 24V 1350 r / minsootvetstvuyut group operating conditions in accordance with GOST 17516-72 M25:
- Height above sea level - not more than 1000m;
- Ambient temperature from -50 ° C to +40 ° C;
- Relative humidity: 95%, temperature 20 ° C;
- The environment, the optimum for the engine - without the contents of gases and corrosive fumes that destroy metals and insulation, as well as reduce the motor parameters in unacceptable limits.