Laboratory equipment >> freight piston pressure manometers

MPK-0,4 cl.0,2 (МПК-0,4) Deadweight gauge IPC-0, 4.

MPK-0,4 cl.0,2 (МПК-0,4)

For order is possible effectively delivery of any quantity.
Deadweight Gauge MPK-0,4 (MPK0,4, MPK 0,4)
 
Deadweight Gauge MPK-0,4, is intended for checking and calibration of mercury sphygmomanometers and the membrane with the outside dimensions from 6.7 kPa to 40.0 kPa (50mm.rt.st. to 300mm.rt.st.).
 
Technical characteristics of the instrument gauges Dead weight MPK-0,4:
 
The upper limit of measurement - 300mm.rt.st.;
The lower limit of measurement - 50mm.rt.st.;
The nominal area of the piston - 1 cm 2;
Acceptable basic error limit unit dead weight gauge MPK-0,4:
- At pressures from 10% to 100% of full scale - ± 0,2% of the actual value of the measured pressure;
- At pressures up to 10% of full scale - ± 0,2% from 0.1 the upper limit of measurement;
The nominal value of the mass of the piston with a load receptor device dead weight gauge MIC-0, 4 - no more than 2.5 kg ∙ 0,98 kg;
Dimensions of the unit dead weight gauge MPK-0,4 - 370h160h250mm;
Weight - no more than 7kg;
The manufacturer guarantees the quality of the instrument dead weight gauge MPK-0,4 technical requirements specifications, subject to the consumer the terms and conditions of storage, transportation, installation, operation, established specifications and operational documentation.
 


Яндекс цитирования