Discount up to 50% on the panel devices.

Laboratory equipment >> tensile testing machines

MIRI-200K Tearing machine Miri-200K.


It is possible effectively delivery of any quantity.
Breaking Machine Miri-200K (MIRI200K, Miri-200-K, MIRI 200 K, Miri 200 K)
Breaking Machine Miri-200K is designed to:
- Static testing of samples of metals and alloys, reinforcing steel, plastic tensile specimens at normal temperature;
- Compression tests;
- Technological tests of samples in bending;
- Tests on sediment;
- Test on a break;
- Technological tests on metal tubes bortirovanie, flattening, distribution, static bending (up to give the model a U-shaped - the bending angle 180 º).
Technical characteristics of explosive devices Miri-200K machine:
Maximum limit load - 200kN;
The lowest limit load - 4kN;
Maximum height of working space unit tensile machine Miri-200K - 420mm/450mm;
Proceedings of the active capture:
- Installation - at least 300mm/150mm;
- Working - not less than 100mm;
The width of the device workspace breaking machine Miri-200K - 400mm/340mm;
The range of loading rates when tested in tension - 0.05 kN/s-20kN/s;
Velocity range of the active capture device breaking machine Miri-200K:
- Small movements - 0.0025 mm/s-2, 5 mm / s;
- Large displacement - 0,025 mm/s-2, 5 mm / s;
The highest rate of displacement of the active capture device breaking machine Miri-200K with no load - 165mm/min;
The limits of permissible error of measurement:
- Load measuring range - ± 1%;
- Moving in a range of dimensions - ± 2%;
- Deformation of the limit range - ± 1%;
The limits of permissible error rate of change of the parameter unit tensile machine Miri-200K - ± 5%;
Dimensions - 2200h1900h2200mm:
Weight of the device breaking machine Miri-200K - 1700kg;
Power consumption - 3.5 kW;
Technical features of the device breaking machine Miri-200K:
Tracking servo-hydraulic actuator provides:
- An exact reproduction modes of loading under any law, regardless of the nature of the resistance of the test sample;
- High dynamic tensile machine in a wide range of loading rates and deforMIRIovaniya, ability to work in soft and hard loading conditions;
- Almost unlimited possibility for limiting tensile machine loads;
- Machines are versatile and provide the execution of all types of mechanical tests of materials in all standard and non-standard methods;
The computer system unit tensile machine Miri-200K provides:
- Automatic control of sample loading rate tensile machine;
- Automatic processing of test results with the issuance of the test;
- The possibility of a probabilistic assessment of the results of tests on the stored information;
- Automatic insertion of amendments to strengthen and eliminate drift "electrical zero";
- Automatic compensation of tensile loading device compliance vehicles;
- Automatic calibration of force, displacement and deformation;
The software appliance breaking machine Miri-200K
The basic software package bursting machine is modular, ie, has the ability to build new types of tests in accordance with the standards for these tests. The test specimens in tension and shape MIRIovanie protocols in accordance with the standards;
When the static tensile test using a device breaking machine Miri-200K provides the following definition of the characteristics of the sample material:
- The limit of proportionality;
- The elastic limit;
- Modulus of elasticity;
- Yield strength of the physical;
- The upper limit of fluidity;
- The lower the yield strength;
- Yield strength of the conditioned;
Ultimate strength,
- Elongation after rupture of the sample;
Contraction ratio
Bursting the machine type of Miri-to differ:
- Greater functionality;
- Accurate and reproducible test results;
- Reliability and performance of exciting devices;
- Small dimensions, low metal content;
- Stylistic unity of the external form;
Breaking Machine Miri-K, depending on the version supplied with:
- V-grips for round, flat and segmented samples;
- Hooks for testing samples of pipes;
- Captures high-speed testing of cylindrical specimens with heads;
- Hooks such as "snail" for the test wire;
- Means for testing fracture toughness;
- Strain sensors (strain gauges) with the bases 25mm, 50mm, 100mm and 200mm;
The manufacturer guarantees the quality of the device breaking machine Miri-200K with the technical specifications in compliance with the conditions of the consumer terms and conditions of storage, transportation, installation, operation, established specifications and operational documentation.