Equipment for maintenance checkup >> - the list of equipment for vehicle inspection >> equipment for inspection and auto service of the plant "GARO" >> technical control LTK
|
||||||||||||||||||||||||||
|
Line technical control LTK-10U-SP-11 Also, this device can be called: LTK-10U-SP11, LTK-10U SP11, LTK 10U SP 11, LTK10U-SP11, LTK10USP11, LTK10U SP11.
Universal line of technical control LTK-10U-SP-11 is designed for monitoring the technical condition of cars and trucks with an axle load of 10 tons and a diameter wheels (bus) from 520 mm to 1300 mm in a government inspection, and can also be used for repairs. Line LTK-10U-SP-11 provides a check of the main systems of a vehicle: - Braking system;
- Steering;
- Suspension components and wheels;
- Engine, transmission;
- Exterior lights;
- Light transmission of glass;
- Speedometers, odometers, tachographs.
Foundation line tester is STS-10U-SP-11 and a set of PCs, rack-mountable control booth. Appearance LTK-10U-SP-11
 Technical characteristics: 1. Maximum axle load: - Cars - up to 2000 kg;
- Trucks - up to 10 000 kg.
2. Wheel diameter (via):
- Cars - from 520 mm to 790 mm;
- Trucks - from 520 mm to 1300 mm.
3. Axles - no more than 10.
4. The distance between the indoor / outdoor roller end brake tester - 800/2800 mm.
5. Measuring ranges:
- The braking force on one wheel:
- Cars - from 1 kN to 6 kN;
- Trucks - from 3 kN to 30 kN;
- Force generated on the control - from 100 N to 1000 N;
- Weight:
- Cars - from 100 kg to 1000 kg;
- Trucks - from 500 to 5000 kg;
- Steering wheel angle - from 0 deg. to 55 deg.
- The angle of the cut-off - from 0 to 140 arcmin arcmin;
- Intensity of external light devices - from 1 to 100 cd 000 cd;
- Hydrocarbon - from 0,000,000 - ¹ to 3 000 000 000 - ¹;
- Carbon monoxide - from 0% to 7.00 ob.d. ob.d.%;
- Carbon dioxide content - from 0 rpm.% To 16 vol.%;
- Oxygen content - from 0% to 21 ob.d. ob.d.%;
- Smoke - from 0% to 99.9%;
- Transmittance glass - from 45% to 99%;
- Sound pressure level (noise) - from 30 dB to 130 dB;
- Air pressure in the pneumatic brake actuator PBX - 0.2-1 MPa.
6. Voltage three-phase AC - 380 V.
7. Frequency three-phase AC - 50 Hz.
8. Installed capacity of electric equipment - 22 kW.
9. Mass technical control LTK-10U-SP-11 - no more than 1980 kg.
10. Setup time line - no more than 15 minutes.
11. Time of continuous operation of the line - at least 8 hours
12. Average life line - at least 8 years.
Principle of operation of technical control LTK-10U-SP-11 is a logical collection and processing of measurement instruments, which are part of the line, as well as visual control of the vehicle. The results are transmitted to the PC wirelessly or manually entered a technical expert. They are displayed on a monitor and may be printed at any point on the printer.
The delivery line LTK-10U-SP-11 includes: - Stand STS-10U-SP-11, including: - Front dash;
- A case of force;
- Thrust block devices;
- Foundation frame;
- Software LTK SIPA;
- Set wireless BSC-04;
- Analyzer AUG-4.01;
- Opacimeter AUG-1D-4.01;
- Testing device headlights DIC;
- Lyuftomer ISL-401 MK;
- A measure of light transmission glass ISS-1;
- Stopwatch SDRN-26-2-000;
- Caliper ShTs-1-150-0, 1;
- Tire pressure gauge MD-214;
- Tire pressure gauge MD-213;
- Front dash SP-3;
- Front dash SP-4;
- A set of software LTK;
- A set of documents.
Optional user supplied: - Video recording system ATS;
- Sound Level Meter NOISE-816T;
- Combustible gas leak detector TS-OP-12;
- Checking belt tension device PPNR generator 100;
- A device for checking the authenticity of documents Ultramag SL-225;
- Eddy current WANG;
- Inspection mirror RO-10M-03;
- Optical tester fluid quality SCB.4000.
- Tester backlash 7500;
- Set the PC.
Software LTK SIPA  Distribution space station checkup equipped LTK-10U-SP-11  Operating Conditions lines of technical control LTK-10U-SP-11: Air temperature - from +10 ° C to +35 ° C. Relative humidity at 25 ° C - 80%.
Atmospheric pressure - from 86 kPa to 106 kPa (650-800 mm Hg)
On line LTK-10U-SP-11 warranty 12 months from the receipt of the equipment in operation, but not more than 14 months from the date of sale. The equipment is certified and entered into the State Register of measuring instruments. Technical documentation accompanying the lines contains a complete description of the operation and maintenance of the line.
Photos for the line technical control LTK-10U-SP-11
|
||||||||||||||||||||||||||
Photos of using the line technical control LTK-10U-SP-11
LTK-10U-SP-11 line technical control usage examples.
|
LTK-10U-SP-11 line technical control usage examples.
|
LTK-10U-SP-11 line technical control usage examples.
|
LTK-10U-SP-11 line technical control usage examples.
|
LTK-10U-SP-11 line technical control usage examples.
|
LTK-10U-SP-11 line technical control usage examples.
|
LTK-10U-SP-11 line technical control usage examples.
|
LTK-10U-SP-11 line technical control usage examples.
|
LTK-10U-SP-11 line technical control usage examples.
|
