Control and measuring devices >> secondary devices - recorders >> КМ140М

KM140М-001-ОМ4

52 560 RUB
13 140 UAH
available:
2 pieces

Online prices include VAT.

For order is possible effectively delivery of any quantity.

Made in: 2016

 

Automatic showing bridge KM140M-001-OM4 (KM 140M-001-OM4, KM-140M-001-OM4, km140m-001-om4, km 140m-001-om4, km-140m-001-om4)

For temperature, salinity and the electrical resistance of the water, as well as to signal when the measured value deviates from the set value.
Application: High
Sensor Type: RTD, SCI
Power supply (V): 220 or 127 V, 50 Hz
Regulating signaling device: 3-point
Automatic showing bridge KM140M-001-OM4 are designed to measure temperature, salinity and the electrical resistance of the water, and to alarm when the measured value deviates from the set value.
Designed for integration and working in special kits and analyzers are used to measure the ratio of two-phase AC voltage, characterized by a content-defined component of a test gas mixture.
The device has a device to turn on (off) the alarm when parameters deviate from the nominal value, and the device produces a voltage 0-1V, the device is proportional to the deviation from the initial index of the scale.

Photos: KM140М-001-ОМ4

KM140М-001-ОМ4 device image.
KM140М-001-ОМ4 device image.
KM140М-001-ОМ4 front view.
KM140М-001-ОМ4 front view.
KM140М-001-ОМ4 side view.
KM140М-001-ОМ4 side view.
KM140М-001-ОМ4 rear view.
KM140М-001-ОМ4 rear view.
KM140М-001-ОМ4 overhead view.
KM140М-001-ОМ4 overhead view.
KM140М-001-ОМ4 bottom view.
KM140М-001-ОМ4 bottom view.


Яндекс цитирования