Discount up to 50% on the panel devices.

Laboratory equipment >> tensile testing machines

IR 5145-500-11 Tearing machine IR 5145-500-11.

IR 5145-500-11

800 000 UAH

Online prices include VAT.

It is possible effectively delivery of any quantity.
Breaking Machine IR 5145-500-11 (IR5145-500-11, IR-5145-500-11, IR 5145-50011, IR 5145500-11)
Breaking Machine is designed IR 5145-500-11 samples for testing of plastics, rubber, ferrous and nonferrous metals (including wire and tape, using special hooks), and other materials and products in tension, compression and bending.
Breaking devices installed machine IR 5145-500-11 on antivibration mountings, special foundation is required.
Technical characteristics of explosive devices IR 5145-500-11:
Maximum limit load - 500kN;
Limits of measurement error in the load range of loads from 20kN up to 500kN - ± 1%;
Speed ​​of movement of the active capture device breaking machine IR 5145-500-11 - 0.5 mm / min to 200mm/min;
The nominal unit price of the smallest category of device rupture machine IR 5145-500-11:
- Indication of the load - 10N;
- When measuring the displacement of the active capture - 0.01 mm;
The course traverses the mobile device IR 5145-500-11 breaking machine without grips - 800mm;
The width of the workspace - 750mm;
Maximum power - 5.3 kW;
Power supply IR 5145-500-11 breaking machine - 380V, 50Hz;
Overall dimensions
- Installation Test - 1340h1175h2710mm;
- Instrument stand - 1500h750h895mm;
Weight of the device breaking machine IR 5145-500-11:
- Installation Test - 1840kg;
- Instrument stand - 260kg;
Completeness of the apparatus main rupture machine IR 5145-500-11:
- Test set;
- Instrument stand;
- Control of the operator (microprocessor) TO-3;
- Captures ZRG-500-1;
- Tensoresistance strength meter;
- The printer (for the IR 5145-500-10);
- Software and hardware (models IR 5145-500-11);
Additional supply of the device breaking machine IR 5145-500-11:
- Universal wedge grips ZKU-500M;
- Devices for testing the bending-500I PR, PR-500C compression and flattening of PR-500SP;
- Measuring deformation of IDN-0, 5/50;
- The system temperature tests with the sensor temperature from 300 º C to 1000 º C;
- Dynamometers exemplary DOSM DORM-3-3 for testing;
Tensile machine IR 5145-500-11 determined the following characteristics of the mechanical properties of materials:
Ultimate strength,
Percentage elongation
Contraction ratio
- The true tensile strength;
Explosive devices IR 5145-500-11 machines give the protocol of the test results;
The machine model IR 5145-500-11 allows programming methods to determine the yield strength of the conditioned (sigma 0.2) and the physical, the elastic modulus and proportionality;
The manufacturer guarantees the quality of the device breaking machine IR 5145-500-11 technical requirements specifications, subject to the consumer the terms and conditions of storage, transportation, installation, operation, established specifications and operational documentation.