Discount up to 50% on the panel devices.

Laboratory equipment >> tensile testing machines

IR 5143-200-10 Tearing machine IR 5143-200-10.

IR 5143-200-10

595 000 UAH

Online prices include VAT.

It is possible effectively delivery of any quantity.
Breaking Machine IR 5143-200-10 (IR5143-200-10, IR-5143-200-10, IR 5143-20010, IR 5143200-10)
Breaking Machine is designed IR 5143-200-10 samples for testing of plastics, rubber, ferrous and nonferrous metals (including wire and tape, using special hooks), and other materials and products in tension, compression and bending.
Breaking devices installed machine IR 5143-200-10 on antivibration mountings, special foundation is required.
Technical characteristics of explosive devices IR 5143-200-10:
Maximum limit load - 200kN;
Limits of measurement error in the load range of loads up to 200kN on 8kN - ± 1%;
Speed ​​of movement of the active capture device breaking machine IR 5143-200-10 - 0.05 mm / min to 100mm/min;
The nominal unit price of the smallest category of device rupture machine IR 5143-200-10:
- Indication of the load - 10N
- When measuring the displacement of the active capture - 0.01 mm;
The course traverses the mobile device IR 5143-200-10 breaking machine without grips - 800mm;
The width of the workspace - 650mm;
Maximum power - 2.1 kW;
Power supply IR 5143-200-10 breaking machine - 380V, 50Hz;
Overall dimensions
- Installation Test - 1220h950h2180mm;
- Instrument stand - 1305h585h790mm;
Weight of the device breaking machine IR 5143-200-10:
- Installation Test - 1200kg;
- Instrument stand - 100 kg;
Completeness of the apparatus main rupture machine IR 5143-200-10:
- Test set;
- Instrument stand;
- Control of the operator (microprocessor) TO-3;
- Captures the type of sample 4;
- Tensoresistance strength meter;
- The printer (for the IR 5143-200-10);
- Software and hardware (models IR 5143-200-11);
Additional supply of the device breaking machine IR 5143-200-10:
- Universal wedge grips ZKU-200M;
- Devices for testing the bending-200I PR, PR-200C compression and flattening of PR-200SP;
- Measuring deformation of IDN-0, 5/50;
- The system temperature tests with the sensor temperature from 300 º C to 1000 º C;
- Dynamometers exemplary DOSM DORM-3-3 for testing;
Tensile machine IR 5143-200-10 determined the following characteristics of the mechanical properties of materials:
Ultimate strength,
Percentage elongation
Contraction ratio
- The true tensile strength;
Explosive devices IR 5143-200-10 machines give the protocol of the test results;
The machine model 5143-200-11 AIR allows programming methods to determine the yield strength of the conditioned (sigma 0.2) and the physical, the elastic modulus and proportionality;
The manufacturer guarantees the quality of the device breaking machine IR 5143-200-10 technical requirements specifications, subject to the consumer the terms and conditions of storage, transportation, installation, operation, established specifications and operational documentation.