Laboratory equipment >> tensile testing machines

IR 5113-500-10 Tearing machine IR 5113-500-10.

IR 5113-500-10

For order is possible effectively delivery of any quantity.
Breaking Machine IR 5113-500-10 (IR5113-500-10, IR-5113-500-10, IR 5113-50010, IR 5113500-10)
Breaking Machine is designed IR 5113-500-10 samples for testing of plastics, rubber, ferrous and nonferrous metals (including wire and tape, using special hooks), and other materials and products in tension, compression and bending.
Breaking devices installed machine IR 5113-500-10 on antivibration mountings, special foundation is required.
Technical characteristics of explosive devices IR 5113-500-10:
Maximum limit load - 500kN;
Limits of measurement error in the load range of loads up to 500kN on 4kN - ± 1%;
Speed ​​of movement of the active capture device breaking machine IR 5113-500-10 - 0.1 mm / min to 500mm/min;
The nominal unit price of the smallest category of device rupture machine IR 5113-500-10:
- When measuring the displacement of the active capture - 0.01 mm;
The course traverses the mobile device IR 5113-500-10 breaking machine without grips - 700mm;
The width of the workspace - 400mm;
Maximum power - 1.5 kW;
Power supply IR 5113-500-10 breaking machine - 380V, 50Hz;
Overall dimensions
- Installation Test - 900h790h1800mm;
- Instrument stand - 1305h585h790mm;
Weight of the device breaking machine IR 5113-500-10:
- Installation Test - 750 kg;
- Instrument stand - 100 kg;
Completeness of the apparatus main rupture machine IR 5113-500-10:
- Test set;
- Instrument stand;
- Control of the operator (microprocessor) TO-3;
- Captures the type of sample 4;
- Tensoresistance strength meter;
- The printer (for the IR 5113-500-10);
- Software and hardware (models IR 5113-500-11);
Additional supply of the device breaking machine IR 5113-500-10:
- Universal wedge grips ZKU-500M;
- Devices for testing the bending-500I PR, PR-500C compression and flattening of PR-500SP;
- Measuring deformation of IDN-0, 5/50;
- The system temperature tests with the sensor temperature from 300 º C to 1000 º C;
- Dynamometers exemplary DOSM DORM-3-3 for testing;
Tensile machine IR 5113-500-10 determined the following characteristics of the mechanical properties of materials:
Ultimate strength,
Percentage elongation
Contraction ratio
- The true tensile strength;
Explosive devices IR 5113-500-10 machines give the protocol of the test results;
The machine model 5113-500-11 AIR allows programming methods to determine the yield strength of the conditioned (sigma 0.2) and the physical, the elastic modulus and proportionality;
The manufacturer guarantees the quality of the device breaking machine IR 5113-500-10 technical requirements specifications, subject to the consumer the terms and conditions of storage, transportation, installation, operation, established specifications and operational documentation.

Яндекс цитирования