Discount up to 50% on the panel devices.

Laboratory equipment >> tensile testing machines

IR 5040-5-11 Tearing machine IR 5040-5-11.

IR 5040-5-11

350 066 UAH

Online prices include VAT.

It is possible effectively delivery of any quantity.
Breaking Machine IR 5040-5-11 (IR5040-5-11, IR-5040-5-11, IR 5040-511, IR 50405-11)
Breaking Machine IR 5040-5-11 samples for testing of plastics, rubber, ferrous and nonferrous metals (including wire and tape, using special hooks), and other materials and products in tension, compression and bending.
Breaking devices installed machine on 5040-5-11 IR antivibration mountings, special foundation is required.
Technical characteristics of explosive devices IR 5040-5-11:
Maximum limit load - 5kN;
Limits of measurement error in the load range of loads from 0.2 kN to 5kN - ± 1%;
Speed ​​of movement of the active capture device breaking machine IR 5040-5-11 - 0.2 mm / min to 200mm/min;
Speed ​​of movement of the active capture (two bands, 24 fixed rate) - from 1mm/min to 1000mm/min;
The nominal unit price of the lowest level unit tensile machine IR 5040-5-11:
- For load indication - 0.1 N;
- When measuring the displacement of the active capture - 0.01 mm;
The course traverses the mobile device breaking machine IR 5040-5-11 without seizures - 1000mm;
The width of the workspace - 400mm;
Maximum power - 0.8 kW;
Power supply breaking machine IR 5040-5-11 - 380V, 50Hz;
Overall dimensions
- Installation Test - 800h840h2000mm;
- Instrument stand - 1305h585h790mm;
Weight of the device breaking machine IR 5040-5-11:
- Installation Test - 235kg;
- Instrument stand - 100 kg;
Completeness of the apparatus main tensile machine IR 5040-5-11:
- Test set;
- Instrument stand;
- Control of the operator (microprocessor) TO-3;
- Screw clamps lever-SMP-5;
- Tensoresistance strength meter;
- Printer (model IR 5040-5-10);
- Software and hardware (models IR and IR 5040-5-11 5040-5-12);
- Measuring the deformation UID 700-2 (for the IR 5040-5-12);
Additional supply of the device breaking machine IR 5040-5-11:
- Grips lever-tick SAM-5;
- Grips lever-tick SAM-0, 5;
- Accessories PR-5-5040;
- The system temperature testing;
- Dynamometers exemplary DOSM DORM-3-3 for testing;
Appliance breaking machine IR 5040-5-11 determined the following characteristics of the mechanical properties of materials:
Ultimate strength,
Percentage elongation
Contraction ratio
- The true tensile strength;
Explosive devices IR 5040-5-11 give the protocol of the test results;
The machine model allows IR 5040-5-11 programming methods to determine the yield strength of the conditioned (sigma 0.2) and the physical;
The machine model allows IR 5040-5-12 standard rubber test samples using UID 700-2;
The manufacturer guarantees the quality of the device breaking machine IR 5040-5-11 technical requirements specifications, subject to the consumer the terms and conditions of storage, transportation, installation, operation, established specifications and operational documentation.