Laboratory equipment >> tensile testing machines

IR-500.1

For order is possible effectively delivery of any quantity.
Testing machine IR-500.1 (IR500.1, IR 500.1, IR-5001)
Testing machine IR-500.1 is designed for static testing of standard samples of metals and alloys at a temperature of 20 º C ± 10 º C.
Devices equipped with a measuring system based on an IBM-compatible PC, allowing you to:
- To conduct the testing process in semi-automatic mode;
- Automatically make processing tests and issuing them in the form of minutes and charts;
- Store information about the trial in the electronic journal.
Testing machine IR-500.1 provides:
- Deformation of the samples to destruction;
- Measurement of the load, fixing most of the breaking load;
- Measurement of displacement and deformation of the active capture samples during testing machines manning the strain gauges;
- Maintenance of the loading rate;
- Record the load displacement and deformation of the active capture;
- Record charts in the coordinates: the load-displacement, stress-strain, load-time, deformation-time, move-time;
- Measurement of the load on the sample by using the built-in cross beam force sensor;
- Active displacement measurement is carried out by capturing the displacement transducer which converts the movement rack associated with yoke into an electrical signal which is displayed in millimeters;
- Measuring the deformation of the sample is carried out by the strain gauges supplied according to customer requirements;
- Control of speed deviation from the set by means of an indicator showing the deviation (in percent) of the real speed of loading of the set by the reference;
- Record charts produced by the computer and the printer.
Technical characteristics of the devices testing machine IR-500.1:
The highest load limit - 500kN;
Drive Type - Hydraulic;
Type siloizmeritelej instrument testing machine IR-500.1 - torsion;
Number of ranges load - 3;
Measuring ranges loads - 10kN, 500kN;
The unit price of the least significant digit reading device load measuring device testing machine IR-500.1 - no more than 0.01 kN;
Limits of error load measurement in the range of measurement in forward - ± 1% of reading;
The scale readings testing machine IR-500.1 (the difference between the highest and lowest readings of the three dimensions) - 1% of the measured load in forward;
Acceptable limit of the variation of the (difference between forward and reverse swing) - less than 2% of the measured load in the range of measurements;
Measuring range of active movement of the capture device testing machine IR-500.1 - 0.2 mm to 100 mm;
The range of strain measurement sensors mounted on the test specimen:
- At the basis of the sensor 25mm - 0,3 mm-2, 5mm;
- When the sensor base 50 mm - 0.3 mm-5 0mm;
The unit price of the least significant digit reading device measuring displacement and strain - not more than 0.001 mm;
The limits of permissible error of the instrument testing machine IR-500.1 displacement measurement - ± 2% of reading;
Limits of error in the measurement of strain - ± 1% of the measured strain in the range of measurement;
Limits of error graphic recording of the load on the printer - in the range of measurement shall not exceed ± 2% of reading;
Limits of error graphic registration of moving active capture device testing machine IR-500.1 - do not exceed ± 3% of the measured value of the quantity recorded in the recorder unit length of the segment in the coordinate "the movement" more than 30mm, a length of the recorded phrase to 30mm - ± 1 mm;
Limits of error graphic recording strain - do not exceed ± 2% of the measured values ​​of the deformation within the span of a strain gauge, which is expressed in an appropriate scale;
Bands playing the instrument movement tenzokalibratora testing machine IR-500.1 - 0mm-25mm;
The range of loading rates with the speed display and deviations from the established - 0.2 kN/s-20, 0kN / s;
Velocity range of active engagement with the speed display and the deviation from the set - 0.01 mm/s-2mm/s;
Error limits while maintaining the speed measurement device loading testing machine IR-500.1 - ± 20% of the set value of the speed of the parameter;
Nominal dimensions of the coordinates of the field for the graphic recording of the chart on the printer:
- Coordinate X (displacement and strain) - not less than 250 mm;
- Coordinate Y (load) - not less than 140mm;
The scale of graphic recording of the chart on the printer device testing machine IR-500.1:
- Coordinate X (displacement and strain) - from 1:10 to 1000:1;
- Coordinate Y (load) - from 1:10 to 1000:1;
Adjusting course of active grip - not less than 300 mm;
Working stroke of the active capture - at least 100 mm;
The highest speed of the active capture device testing machine IR-500.1 unloaded - at least 120mm/min;
The height of the working space, including the installation and stroke active capture - at least 420mm;
Width of appliance space testing machine IR-500.1 - not less than 500mm;
Power consumption - less than 3.0 kW;
Probability of failure-free operation for 1000 hours of operation - 0.85;
Average lifetime testing machine IR-500.1 - not less than 15 years;
Dimensions - 2400h1900h2500mm;
Weight of the device testing machine IR-500.1 - not more than 1650kg;
Power supply AC:
- Voltage - 380V;
- The voltage range - from -5% to +10% of the nominal value;
- Frequency - 50 Hz ± 0,1 Hz;
Safety requirements appliance testing machine IR-500.1:
- Electrical grounding resistance - less than 1.0 ohm;
- Insulation resistance of electrical equipment - not less than 1.0 MW;
- Equivalent noise level - less than 80dBA;
The scope of supply of the basic instrument testing machine IR-500.1 are:
- The device is loaded with hydraulic grips;
- Remote, including the installation of a pump, electrical equipment;
- The system of measurements on a PC based software;
- Sets:
- Interchangeable parts;
- Tools and accessories;
- Spare parts;
- Computer table;
The test devices tensile testing machines IR-500.1 samples:
- Samples in accordance with GOST 1497-84 - 1mm-5mm, 1mm-5mm, 1mm, 3mm, 1mm-23mm;
- Samples in accordance with GOST 11701-84 - 0.5 mm-3 mm;
- Hot-rolled steel - diameter of 8mm-36mm;
- Calibrated round steel - diameter of 8mm-36mm;
- Calibrated round steel with special surface finish - the diameter of 8mm-36mm;
- Hot-rolled square steel - with a side of the square 8mm to 40mm;
- Calibrated square steel - with a side of the square 8mm to 40mm;
- Hot-rolled steel strip - 4mm-32mm, width up to 40mm;
- Pipe - diameter of 8mm-60mm, wall thickness of 0.5 mm, 4 mm;
- Reinforcing steel - diameter of 8mm-36mm;
- Samples of types II, III, XII, XIV, XV, XVI, XVII, XIX, XXV testing of welded joints - the diameter of 8mm-36mm, wall thickness of 1mm to 40mm;
By order of the consumer appliances testing machine IR-500.1 can be equipped with:
- Additional tools for other types of testing (bending, compression, shear);
- Exemplary dynamometers third category;
- Tenzokalibratorom TAS-25;
- The strain gauges:
- BC-25 - with a base measuring 25 mm and measuring limit of 2.5 mm;
- BC-50 - with a base measuring 50mm and 5mm limit of measurement;
The manufacturer guarantees the quality of the instrument testing machine IR-500.1 specification requirements specifications subject to the consumer the terms and conditions of storage, transportation, installation, operation, established specifications and operational documentation.

Photos: IR-500.1

IR-500.1 machine image.
IR-500.1 machine image.


Яндекс цитирования