Laboratory equipment >> tensile testing machines

IR-100.1

For order is possible effectively delivery of any quantity.
Testing machine IR-100.1 (IR100.1, IR 100.1, IR-1001)
Testing machine IR-100.1 is designed for static testing of standard samples of metals and alloys at a temperature of 20 º C ± 10 º C.
Devices equipped with measurement based on IBM-compatible personal computer that allows you to:
- To conduct the testing process in semi-automatic mode;
- Automatically perform processing tests and issuing them in the form of minutes and charts;
- To keep the test information in the electronic journal.
Testing machine IR-100.1 provides:
- Deformation of the samples to destruction;
- Measurement of the load, fixing most of the breaking load;
- Measurement of active capture movement and deformation of the samples at the Manning testing machines strain gauges;
- Maintenance of the loading rate;
- Record the load moving active capture and strain;
- Record charts in the following coordinates: load-displacement, load-deformation, load-time, strain-time, move-time;
- Measurement of the load on the sample by using the built-in traverse force sensor;
- Measurement of active capture movement by means of displacement transducer, which converts the movement of rail-related traverse into an electrical signal which is displayed in millimeters;
- Measurement of sample deformation strain gauges are supplied according to customer requirements;
- Control speed deviation from the set by means of an indicator showing the deviation (in percent) of the real rate of loading of the preset adjuster;
- Record charts produced by the computer and the printer.
Technical characteristics of the devices testing machine IR-100.1:
The highest load limit - 100kN;
Drive type - Hydraulic;
Type siloizmeritelya device testing machine IR-100.1 - torsion;
The number of load ranges - 3;
Measuring ranges of loads - 2kN-100kN;
Unit price of the least significant digit reading device load measuring device testing machine IR-100.1 - more than 0.01 kN;
Limits of error of measurement of the load in the measuring range of the direct course - ± 1% of reading;
Scope readings testing machine IR-100.1 (the difference between the highest and lowest readings of the three dimensions) - 1% of the measured load in direct course;
Limit of permissible variations reading (the difference between the forward and reverse motion) - not more than 2% of the measured load in the measuring range;
Measuring range of movement of the active capture device testing machine IR-100.1 - 0.2 mm to 100 mm;
Measuring range strain sensors installed in the test sample:
- At the basis of the sensor 25mm - 0.3 mm-2, 5 mm;
- At the basis of the sensor 50 mm - 0.3 mm-5, 0 mm;
Unit price of the least significant digit reading device measuring displacement and strain - not more than 0.001 mm;
The maximum permissible errors appliance testing machine IR-100.1 when measuring displacement - ± 2% of reading;
The maximum permissible errors in the measurement of strain - ± 1% of the measured strain in the range of measurement;
The maximum permissible errors graphic registration of the load on the printer - in the range of measurement shall not exceed ± 2% of reading;
The maximum permissible errors graphic registration of moving active capture device testing machine IR-100.1 - do not exceed ± 3% of reading value at the length of the segment recorded a recording device in the coordinate "movement" over 30mm, the length of the recorded segment to 30mm - ± 1 mm;
The maximum permissible errors graphic recording strain - do not exceed ± 2% of the measured values ​​of the deformation within the range of strain gauge measurements, expressed in an appropriate scale;
Bands play move tenzokalibratora appliance testing machine IR-100.1 - 0mm-25mm;
Range of loading rates with the display of speed and deviation from the prescribed - 0.1 kN/s-10, 0kN / s;
Velocity range of the active engagement with the speed display and the deviation from the set - 0.01 mm/s-2mm/s;
The maximum permissible errors, while maintaining the speed measurement of the loading device testing machine IR-100.1 - ± 20% of the set value of the speed of the parameter;
The nominal dimensions of the field coordinates for graphic recording chart on the printer:
- Coordinate X (displacement and strain) - not less than 250mm;
- Coordinate Y (load) - not less than 140 mm;
Scale graphic recording chart on the printer device testing machine IR-100.1:
- Coordinate X (displacement and strain) - 1:10 to 1000:1;
- Coordinate Y (load) - 1:10 to 1000:1;
Installation course active capture - at least 300 mm;
Working stroke of active capture - at least 100 mm;
The highest speed of the active capture device testing machine IR-100.1 unloaded - at least 300mm/min;
Height of space, including the installation and stroke active capture - at least 400mm;
The width of the working of the appliance testing machine IR-100.1 - at least 350 mm;
Power consumption - no more than 1.6 kW;
Reliabilities for 1000 hours of operation - 0.85;
The average life of the appliance testing machine IR-100.1 - not less than 15 years;
Dimensions - 2100h1900h1950mm;
Weight of the device testing machine IR-100.1 - no more than 940kg;
Electrical power Supply:
- Voltage - 380V;
- Voltage fluctuation - from -5% to +10% of the nominal value;
- Frequency - 50 Hz ± 0,1 Hz;
Safety requirements appliance testing machine IR-100.1:
- Electrical grounding resistance - less than 1.0 ohm;
- Insulation resistance of electrical equipment - not less than 1.0 MW;
- Equivalent to the sound level - no more than 80dBA;
The scope base with the apparatus testing machine IR-100.1 are:
- The device is loaded with hydraulic clamp;
- Control, which includes the installation of a pump, electric;
- The measuring system based on a PC with the software;
- Sets:
- Replacement parts;
- Tools and accessories;
- Spare parts;
- Computer table;
Explosive device under test testing machine IR-100.1 samples:
- The samples in accordance with GOST 1497-84 - 3mm-7mm, 4mm-6mm, 1mm-4mm, 6mm-23mm;
- Samples according to GOST 11701-84 - 0.5 mm-3mm;
- Hot-rolled steel - diameter 5mm-20mm;
- Calibrated round steel - diameter 5mm-20mm;
- Calibrated round steel with special surface finish - diameter 5mm-18mm;
- Hot-rolled square steel - with a side of a square 6mm-18mm;
- Steel Calibrated square - with a side of a square 5mm-18mm;
- Hot-rolled steel strip - 4mm-16mm, width up to 20 mm;
- Pipes - 5mm-20mm diameter, wall thickness 0.5 mm, 2 mm;
- Reinforcing steel - diameter 5mm-20mm;
- Samples of types II, III, XII, XIV, XV, XVI, XVII, XIX, XXV testing of welded joints - the diameter of 5 mm, 20 mm, wall thickness of 1 mm-20 mm;
Optionally appliances testing machine IR-100.1 can be equipped with:
- Additional devices for other types of testing (bending, compression, shear);
- Exemplary dynamometers third category;
- Tenzokalibratorom TCU-25;
- Strain gauges:
- BC-25 - with a base measuring 25 mm and a limit of measurement 2.5 mm;
- BC-50 - with a base measuring 50 mm and span 5 mm;
The manufacturer guarantees that the quality of the device testing machine IR-100.1 technical requirements specifications provided the customer terms and conditions of storage, transportation, installation, operation, and its specified operational documentation.

Photos: IR-100.1

IR-100.1 machine image.
IR-100.1 machine image.


Яндекс цитирования