Customer: laboratory TI in Kirovograd region.
Performers: engineer to connect the diagnostic equipment.
1. Installation and connection of brake tester STM-15000.
Date of performance: July 2011.
Progress you can see in the photos below.
If you want to view more photos - just click on it.
Tester STM-15000U waiting for installation.
Frame cradle for brake tester is installed.
To install the roller assemblies of the brake tester STM-15000U used tractor with the function of the crane.
Roller brake tester STM units ready for installation in the frame cradle.
Given the large mass of a roller unit (over 650kg), the crane is needed as opposed to a few staff station.
The control cabinet for tester STM-15000U.
After the final inspection of electrical connections and alignment are carried out welding work on fixing the brake tester.
Tester itself is not welded to the cradle. Retaining only welded construction. Thus tester STM-15000U not be able to motion in the horizontal plane. At the same time, if necessary tester will be easy to pick up the carcass-lodgement.
For reliable connection locking elements are not only welded to the bottom of lodgement and bolted by bolts.
Connecting the signal and power cables to the left of aggregate brake tester. The left unit is a switching unit signals and settings of both roller assemblies.
Connect the cables to the right roller assembly. Pay attention to the quality of the gearbox. Gearbox is unique to the plant META.
Photos: Installation of the brake stand STM-15000U for the newly built laboratory of TI in Kirovograd region.