Equipment for maintenance checkup >> - the list of equipment for vehicle inspection >> gas analyzers >> Infrakar
The gas analyzer Infrakar M 2T.02 of high accuracy class 1.
CO/CH/SO2/O2 / Lambda / Tachometer / Oil temperature / RS-232 / Printer / Avtosliv condensate / auto-zero / Working with LTK and motor testers.
Gas analyzers Infrakar M are designed to measure the volume fraction of carbon monoxide (CO), hydrocarbons (CH) (based on hexane), carbon dioxide (CO2), oxygen (O2) in the exhaust gases of vehicles with gasoline engines.
In the gas analyzer available channels for frequency measurement of the crankshaft (all versions) and oil temperature (T version) motor vehicles.
Based on the measured values of CO, CH, CO2 and O2 gas analyzer device Infrakar M 2T.02 calculates the excess air ratio lambda.
Gas analyzers Infrakar M devices are divided into classes I and II of accuracy.
Infrakar M1 - Class II device, Infrakar M2 - Class I device (high precision).
Gas analyzer, which has a channel measurement of oil temperature, denoted by the letter T.
Each basic design analyzers Infrakar M has 2 additional performances, characterized by a set of delivery:
- Version 01 - no built-in printer;
- Version 02 - with built-in printer.
Gas analyzers Infrakar M-2T.02 is fully certified and certified in Russia, Kazakhstan and Belarus, as well as included in the State Register of MI:
Infrakar M2 (high precision)
- SB: 0% -5%;
- CH: 0mln-1-2000mln-1;
- CO2: 0% -16%;
- O2: 0% -21%;
Lambda: 0 ... 2;
Oil temperature: 20 º C and 100 º C;
Basic relative error of measurement channels of CO, CO2, O2 - ± 4%;
Basic relative error of measurement channel analyzerdevice InfrakarCH M-2T.02 - ± 5%;
The reduced measurement error tachometer: ± 2,5%;
Warm-up time - no more than 30 minutes at 20 º C;
Response time analyzer - no more than 30 seconds;
Response time channel O2 - less than 60 seconds;
Power supply gas analyzer Infrakar M 2T.02- 12V/220V;
Power consumption - less than 30 V ∙ A;
Lifetime - 10 years;
Display readings analyzer Infrakar M 2T.02 - LED;
Digit height - 14 mm;
Weight - no more than 10kg;
Overall dimensions analyzer Infrakar M 2T.02 (WxDxH) - 355h330h180mm.
The stability of the testimony;
The low inertia;
Automatic condensate drain;
Automatic flushing device analyzerin zero Infrakar M 2T.02;
Built-in printer with real-time clock (Version 02);
Communication with PC via RS-232;
Ability to adjust the sensitivity of the tachometer;
The calculation of the parameter LAMBDA for different fuels: gasoline, propane or natural gas;
The calculation of the parameter CO - CORRECT;
All devices are equipped with software for graphic display and process readings analyzer on a PC.
To ensure the highest level of service, purchase gas detector price which will surprise you.
In order to buy gas analyzer Infrakar M 2T.02 contact our sales department.
Photos: Infrakar M-2T.02