Radiometric devices >> devices for checking, calibration and metrology

I1-17 Calibrator I1-17.

I1-17

99 999 RUB
40 000 UAH
available:
2 pieces

Online prices include VAT.

For order is possible effectively delivery of any quantity.
Calibrator I1-17 (I117, I-1-17, I 1 17, I1 17)
 
I1-17 Calibrator is designed to work in the AIS or as a standalone device for checking PF U-channels oscilloscope 1-4th class of accuracy in the frequency range 10MHz-0MGts.
 
Technical characteristics of the instrument calibrators I1-17:
 
The instrument can measure the following parameters of HRP: the rise time, settling time, the release on top of the slope and uneven peaks.
Suitable instrument calibrator I1-17 in the control of the metrological characteristics of AIS oscilloscopes, as well as for measuring the linear four-HRP (video amplifier, attenuators, etc) with a frequency band 0MGts-10MHz.
The generator I1-17 are provided in manual mode and an external program control parameters via the CPC. As part of the instrument used a programmable microprocessor;
Modes of operation instrument calibrator I1-17:
Mode 1:
A single sequence of pulses of positive and negative polarity:
- Porosity - not less than 100;
- Rise time - 8.5 ns;
- The duration of the cut - no more than 100 ns;
- Pulse duration - 0.1 ms-999 9mks;
- The maximum amplitude of - 35 V;
- Release at the top of the pulse - less than 1.5%;
- Irregularity of the pulse - not more than 0.75%;
Mode 2 device calibrator I1-17:
A single sequence of pulses of positive and negative polarity:
- Porosity - not less than 10;
- Rise time - 100 ns;
- The duration of the cut - no more than 200ns;
- Pulse duration 0.1 ms-9999mks;
- Maximum amplitude - 5V;
- Release at the top of the pulse - less than 1%;
- Irregularity of the pulse - less than 0.5%;
Accuracy of the amplitude calibrator unit I1-17 - ± 3%;
Accuracy period - ± 1%;
Consumed by the device calibrator I1-17 power - 120V ∙ A;
Replaces - I1-11;
Recommended replacement - K2S-62;
The mass of the instrument calibrator I1-17 - 19kg;
Dimensions - 480h160h475mm;
The manufacturer guarantees the quality of the instrument calibrator I1-17 technical requirements specifications subject to user terms and conditions of storage, transportation, installation, operation, established specifications and operational documentation.


Яндекс цитирования