G5-53 G5-53 The pulse generator G5-53
4.9 63

The pulse generator G5-53 (G553, G5 53)
Designed to adjust the various settings and pulse circuits and devices, measuring transient response characteristics of two-port measurements of amplitude analyzers and discriminators determine the error of measurement of the amplitude voltmeters and oscilloscopes.
The range of pulse durations of 0.3 ms-1 s
The pulse repetition period 1mks-10s
The pulse amplitude 1V to 10V

Radiometric devices
generators (G2-, G3-, G4-, G5-, G6-, GK4-, GKCh, RG4-, Ya2R-, Ya5Kh-, Ya8Kh-, TR- and others)

Price:

on request

 

Product information updated 07 April 2024.

Found cheaper?

Let us know. Our price is the best. 

Warranty:

12 months.

Warranty extension up to 5 years. 

Terms of delivery:

To all regions of the country, international delivery. 

Product information updated 07 April 2024.

Found cheaper?

Let us know. Our price is the best. 

Warranty:

12 months.

Warranty extension up to 5 years. 

Terms of delivery:

To all regions of the country, international delivery. 

Technical characteristics

The pulse generator G5-53 (G553, G5 53)
Designed to adjust the various settings and pulse circuits and devices, measuring transient response characteristics of two-port measurements of amplitude analyzers and discriminators determine the error of measurement of the amplitude voltmeters and oscilloscopes.
The range of pulse durations of 0.3 ms-1 s
The pulse repetition period 1mks-10s
The pulse amplitude 1V to 10V

The pulse generator G5-53 represents a source of pulsed signals calibrated amplitude with a wide range of follow-up period, pulse duration and the time shift.
The pulse generator G5-53 is designed to adjust the various settings and pulse circuits and devices, measuring transient response characteristics of two-port measurements of amplitude analyzers and discriminators determine the error of measurement of the amplitude voltmeters and oscilloscopes.
The pulse generator G5-53 can be operated under the following conditions:
- Ambient temperature from +5 to +40 ° C;
- Relative humidity of 95% at a temperature of + 30 ° C.
- Atmospheric pressure of 100,000 ± 400N / m 2 (760 ± 30 mm Hg. Centuries).
- Mains voltage of 220 ± 22 V, ± 0,5 at 50 Hz or 115 ± 6 V and a frequency of 400 +29 / -12 Hz, with harmonic content up to 5%. The normal temperature is the ambient temperature of 20 ± 5 ° C.
Attention!
During operation, the instrument the pulse generator G5-53 type of launch, the value of the repetition period, the time shift, duration, and polarity of the output pulses are set by pressing the appropriate switches on the front panel.
If all of the buttons of one of the switches are pressed - the device is inoperative and appears at its output surge voltage occurs as a result of random internal electrical processes.
Technical data
The pulse generator G5-53 single channel with a continuous sequence of pulses.
The basic pulse generator of rectangular shape and the positive or negative polarity.
Basic pulse duration is adjustable from 0.3 ms to 1 s by sub-bands:
0.3 ms - 1mks ("0.1"), 1 ms - 10 ms ("March 10")
1mks - 10mks ("1"), 1ms - 100ms ("April 10")
10mks - 100mcs ("10"), 0.1 - 1c ("May 10")
100mcs - 1000mks ("February 10".)
Setting accuracy of pulse duration in the range of operating temperatures and when the supply voltage does not exceed ± (0,1 τ + and 30 ns).
Spurious modulation of pulse duration is not more than (0,002 τ and +0,0002 τ and max +20 ns).
The maximum amplitude of the main pulse of at least 10V on the outside of the agreed load of 50 ohms ± 0,25.
Adjust the amplitude of the fundamental pulses at the output of the generator without remote attenuator is in the range of 1 - 10 V. Resolution adjusting the amplitude of the input built-in attenuator 1 mV.
Error in setting the amplitude of the main pulse at the output of the unit the pulse generator G5-53 under normal conditions does not exceed ± (0,01 U + 5 mV).
Complete the generator there are external to the weakening of fixed attenuators 20 and 40 dB (10 and 100).
Position error amplitude output pulses major attenuators not exceed ± 0,03 U. Position error amplitude pulses in the main working range of temperatures, and when the voltage does not exceed the generator output ± (0,015 U + 10mV), the output of the fixed attenuators ± 0,045 U.
Parasitic amplitude modulation of the main pulse does not exceed 0.1% of the specified amplitude. The minimum allowable duty cycle of the main video pulse signal at the output of the generator is not more than 2. Rise basic pulse does not exceed 15 H c on the outside of a matched load of 50 ohms. Length cut main pulse is not more than 50 N on the outer coherent c 50 ohms.
Unevenness on the top and the main pulse in the pause between the pulses does not exceed 1% of the specified amplitude. Emissions after rising and falling fundamental impulses do not exceed 1% of the set amplitude.
Time to establish a predetermined value does not exceed the uneven 75n c. The time shift (delay) of the main pulse at the output of the generator relative to sync smoothly adjusted from 0 to 100 ^ c for sub-bands:
0 - 1 microsecond ("0.1")
1mks - 10mks ("1")
10mks - 100mcs ("10").
Error in setting the time shift in the operating temperature range, and when the supply voltage does not exceed ± (0,1 τ W + 30 ns.)
Spurious modulation time shift of the main pulse does not exceed (0,002 τ W + 0,0002 τ W max +10 ns). The period following the main pulse at internal startup is adjustable from 1MK c to 10c on the band;
1mkc - 10mkc ("1"), 1 ms - 10 ms ("March 10")
10mkc - 100mkc ("10"), 10ms - 100ms ("April 10")
100mk 1000mkc c-("February 10")
0.1 - 1c ("May 10")
1c - 10c ("June 10").
Setting error follow-up period in the operating temperature range, and when the supply voltage does not exceed ± 0,1 T SL.
The unit the pulse generator G5-53 is provided by an external trigger pulses of both polarities longer than 0.1 ms, repetition rate from single pulses up to 1 MHz, amplitude of 1 to 10, as well as a sinusoidal voltage with frequency from 5 Hz to 1 MHz, amplitude of 1 - 10V.
The generator provides a one-time mechanical trigger, which provides a single output.
The generator provides a clock synchronous with the main pulse with the following parameters on the outside of the agreed 50-ohm load:
- Positive polarity;
- The maximum amplitude of 10-15 V;
- Minimum amplitude of not more than 5 V;
- Duration of less than 300 ns; - rise time less than 30 ns;
- Irregularity of the pulse, and in the pause between the pulses of less than 10% of the amplitude.
The time shift clock relative to an external trigger pulse is not more than 0.4 microseconds when the trigger pulse rise time less than 50ns.
External trigger input impedance is not less than 5 ohms.
Dielectric strength power circuit device can withstand without breakdown test voltage of 1000 V (peak) in normal conditions and 600 in moisture.
The insulation resistance of this circuit relative to the body of at least 20 MW under normal conditions and at least 1 Mohm moisture.
Power supply the pulse generator G5-53 is powered by the AC voltage of 220 ± 22 V, ± 0,5 at 50 Hz or 115 ± 6 V, frequency of 400 +28 / -12 Hz and harmonic content up to 5%
The power consumed by the device the pulse generator G5-53 from the network at rated voltage not exceeding 100 VA.
Time samoprogreva no more than 15 minutes. Time of continuous work 8 hours. MTBF is not less than 750 hours. Overall dimensions of the unit the pulse generator G5-53 490h175h355 mm. Overall dimensions in transport package: 1 020 x536, 4h636, 8 mm.
Overall dimensions in the packing box: 742 h340h 449 mm.
Unit weight of 16 kg.
Weight of the device in the packing box is not more than 40 kg.
Weight of the device in a shipping container 70 kg.
Rate the product: G5-53
Number of views: 2546
Product rating: 4.6
Number of grades: 322
* rating and all product statistics are updated once a month; information is current as of 24 April 2024

Photos: G5-53

G5-53 generator image.

G5-53 generator image.

G5-53 front view.

G5-53 front view.

G5-53 side view.

G5-53 side view.

G5-53 rear view.

G5-53 rear view.

G5-53 overhead view.

G5-53 overhead view.

G5-53 bottom view.

G5-53 bottom view.

Leading online store Zapadpribor - a huge selection of measuring equipment for the best value and quality. So you can buy inexpensive devices, we monitor competitors' prices and are always ready to offer a lower price. We only sell quality products at the best prices. On our site you can buy cheaply as the latest innovations and proven equipment from the best manufacturers.

The site includes a special offer «buy at the best price» - if other Internet resources (bulletin board, forum or announcement of another online service) in products presented on our site, the lower price, we will sell it to you even cheaper! Buyers also additional discount for leaving a review or photo of use of our products.

In the price list contains not the whole range of products offered. Prices of goods, not included in the price list can learn to contact the manager. Also, our managers You can get detailed information about how cheap and profitable to buy instrumentation wholesale and retail. Telephone and e-mail for advice on the purchase , delivery or receipt are shown on the description of the goods. We have the most qualified staff, quality equipment and the best price.

 

Online store Zapadpribor - the official manufacturer's dealer test equipment. Our goal - selling high quality goods with best price offer and service to our customers. Our store can not only sell you the necessary instrument, but also offer additional services to its calibration, repair and installation. That you have a pleasant experience when shopping on our site, we have provided special gifts guaranteed to the most popular products.

 

We offer fast international shipping to almost every country in the world: Australia, Austria, Azerbaijan, Albania, Algeria, Anguilla, Angola, Antigua and Barbuda, Argentina, Aruba,  Bahamas, Bangladesh, Barbados, Bahrain, Belize, Belgium, Benin, Bermuda, Bulgaria, Bolivia, Bonaire, Sint-E. and Saba, Bosnia and Herzegovina, Botswana, Brazil, British Virgin Islands, Brunei Darussalam, Burkina Faso, Burundi, Bhutan, VietNam, Vanuatu, Vatican City, Venezuela, Armenia, Gabon, Guyana, Haiti, Gamia, Gambia, Ghana, Guatemala, Guinea, Gibraltar, Honduras, Hong Kong, Grenada, Greenland, Greece, Georgia, Denmark, Democratic Republic of the Congo, Jersey, Djibouti, Dominica, Dominican Republic, Ecuador, Eswatine, Estonia, Ethiopia, Egypt, Zambia, Zimbabwe, Jordan Indonesia, Ireland, Iceland, Spain, Italy, Cape Verde, Kazakhstan, Cayman Islands, Cambodia, Cameroon, Canada, Qatar, Kenya, Kyrgyzstan, China, Cyprus, Kiribati, Colombia, Comoros, Congo, Korea (Rep.), Costa Rica, Kot-d'Ivoire, Cuba, Kuwait, Curacao, Laos, Latvia, Lesotho, Lithuania, Liberia, Lebanon, Libya, Liechtenstein, Luxembourg, Myanmar, Mauritius, Mauritania, Madagascar, Macao, Malawi, Malaysia, Mali, Maldives, Malta, Morocco, Mexico, Mozambique, Moldova, Monaco, Monaco, Namibia, Nauru, Nepal, Niger, Nigeria, Netherlands, Germany, New Zealand, New Caledonia, Norway, UAE, Oman, Cook Islands, Pakistan, Palestine, Panama, Papua New Guinea, Paraguay, Peru, South Africa, Poland, Portugal, Republic of Chad, Rwanda, Romania, El Salvador, Samoa, San Marino, Saudi Arabia, Swaziland, Seychelles, Senegal, Saint Vincent and the Grenadines, Saint Kitts and Nevis, Saint Lucia, Serbia, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, United Kingdom of Great Britain and Northern Ireland, Sudan, Suriname, East Timor (Timor-Leste), USA, Sierra Leone, Tajikistan, Taiwan, Thailand, Tanzania (United Republic of), Togo, Tonga, Trinidad and Tobago, Tuvalu, Tunisia, Turkey, Turkmenistan, Uganda, Hungary, Uzbekistan, Uruguay, Faroe Islands, Fiji, Philippines, Finland, France, French Polynesia, Croatia, Central African Republic, Czech Republic, Chile, Montenegro, Switzerland, Sweden, Sri Lanka, Jamaica, Japan.

We also provide such metrological procedure: calibration, tare, graduated, testing of measuring instruments.

The online store takes an active part in such procedures as electronic bidding, tender, auction.

If there is no site in the descriptive information you need on the device you can always turn to us for help. Our qualified managers will update for you on the technical characteristics of the device from its technical documentation: user manual, certificate, form, operating instructions, diagram. If necessary, we will take a photo of your device, or a device stand. You can leave feedback on the unit purchased from us, the meter, the device, indicator, or product. Your review for your approval will be published on the site without contact information.

 

Description of the instruments taken from the technical documentation or technical literature. Most pictures of products made directly by our experts prior to shipment of goods. In the description of the device provided the main technical characteristics of the instrument: nominal measuring range, accuracy class, scale, supply voltage, size (size), weight. If the site you see the discrepancy device name (model) specifications, photo or documents attached - let us know - you will get a useful gift with-selling device.

 

While the need to clarify the overall weight and size or the size of the individual meter you can in our service center. If you need our engineers will help you choose the most complete analog or a suitable replacement for the device you are interested. All counterparts and replacement will be tested in one of our laboratories with the full compliance to your requirements.

In the technical documentation for each device or product, information is provided on the list and amount of precious metals content. The documentation gives the exact weight in grams of precious metals: Au gold, palladium Pd, platinum Pt, silver Ag, tantalum Ta and other platinum group metals (PGM) per unit item. These precious metals are found in nature in very limited quantities and therefore have such a high price.

On our website you can familiarize yourself with the technical characteristics of devices and obtain information on the content of precious metals in devices and radio components manufactured in the USSR. We draw your attention to the fact that often the actual content of precious metals differs by 10-25% from the reference one in a smaller direction! The price of precious metals will depend on their value and mass in grams.

All text and graphic information on the site is informative. The color, shade, material, geometric dimensions, weight, content, delivery set and other parameters of the goods presented on the site may vary depending on the batch of production and year of manufacture. Check with the sales department for more information.

 

If you can make repairs to the device yourself, our engineers can provide you with a complete set of necessary technical documentation: circuit diagram TO, ER, FD, PS. We also have an extensive database of technical and metrological documents: technical specifications (TS), the terms of reference (TOR), GOST (DSTU), the industry standard (OST) test procedure, the method of certification, verification scheme for more than 3,500 types of measuring equipment from the manufacturer this equipment. From the site you can download all the necessary software (the software driver) is required for the product purchased.

We carries out repairs and maintenance of measuring equipment in more than 75 different factories of the former Soviet Union and CIS.

We also have a library of legal documents that are related to our field of activity: the law, code, ordinance, decree, temporary position.