G4-165 G4-165 High-frequency generator G4-165.
4.9 63
High-frequency signal generator G4-165 (G4165, G 4165, G-4-165, G4 165)
Suitable for setting and adjusting stereo-class Hi-Fi, various equipments in NC, AM, FM, AM + FM;
Frequency range - from 0.14 MHz to 129.9999 MHz;
Readability of frequency tuning - 0.1 kHz;
Acceptable basic error limit frequency setting - no more than ± 1.10 -4%;
The limits of adjustment of output voltage into 50 ohms and 75 ohms in the "NC" and "FM" - from-146dBV +6 dBV (0.05 × 10 -6 to 2B);
Limits output voltage adjustment for 50-ohm loads in the "AM" - from-146dBV to 0dBV (from 0,05 ∙ 10 -6 V to 1 V);
Acceptable basic error limit set the reference level output voltage 0.1 V at 50 Ohm load - no more than ± 0,5 dB.

Products catalog

Radiometric devices
generators (G2-, G3-, G4-, G5-, G6-, GK4-, GKCh, RG4-, Ya2R-, Ya5Kh-, Ya8Kh-, TR- and others)
high-frequency signal generators (G4-, GK4-, RG4-)

Price:

on request

 

Get price

Product information updated 03 April 2024.

Found cheaper?

Let us know. Our price is the best. 

Warranty:

12 months.

Warranty extension up to 5 years. 

Terms of delivery:

To all regions of the country, international delivery. 

Product information updated 03 April 2024.

Found cheaper?

Let us know. Our price is the best. 

Warranty:

12 months.

Warranty extension up to 5 years. 

Terms of delivery:

To all regions of the country, international delivery. 

Accessories, inexpensive analogues and other devices in stock(5)

Technical characteristics

High-frequency signal generator G4-165 (G4165, G 4165, G-4-165, G4 165)
 
High-frequency signal generator G4-165 is used to set and adjust the stereo-class Hi-Fi, various equipments in HK, AM, FM, AM + FM.
Provides measurement of high-end tuners to GOST 5651-82 with the necessary technology stocks.
Features of generator G4-165:
Small harmonic distortion in the AM and FM modes;
A good shielding RF nodes;
Integrated single-chip microcomputer fully automates the process control device, produces a set of setup and eliminates the installation of prohibited modes, set parameters in the correct reading units, stores, in memory and causes up to 11 arbitrary combinations of key parameters, persistent and when you turn off the device;
The control is performed via the CPC.
 
Technical characteristics of the instrument high-frequency signal generator G4-165:
 
Frequency range - from 0.14 MHz to 129.9999 MHz;
Readability of frequency tuning device generator G4-165 signal high - 0.1 kHz;
Acceptable basic error limit frequency setting - no more than ± 1.10 -4%;
The limits of adjustment of output voltage into 50 ohms and 75 ohms in the "NC" and "FM" - from-146dBV +6 dBV (0.05 × 10 -6 to 2B);
Limits output voltage adjustment device signal generator G4-165 high-frequency 50 Ohm in the "AM" - from-146dBV to 0dBV (from 0,05 ∙ 10 -6 V to 1 V);
Acceptable basic error limit set the reference level output voltage 0.1 V at 50 Ohm load - no more than ± 0,5 dB;
The instability of the output voltage reference signal generator unit high G4-165 for any 15 minutes of work after samoprogreva within 30 minutes - no more than 0.1 dB;
The frequency of the internal modulation source in the "AM" - 400Hz, 1000Hz;
Frequency of the external modulation source device signal generator G4-165 high-frequency mode in the "AM" - from 30Hz to 10000Gts;
Adjustment range of the coefficient of amplitude modulation in increments of 1% - 0% to 99%;
The margin of error factor setting "AM" from 5% to 90%:
- At a frequency of 1000 Hz modulating signal - no more than ± 5%;
- In the range of modulating frequencies from 30 Hz to 20,000 Hz - ± 10%;
Harmonic envelope "AM" signal devices rf signal generator G4-165:
- At modulation frequencies of up to 129.9999 MHz 64MGts - from 1kHz to 100kHz;
- At modulation frequencies of up to 63.9999 MHz 32MGts - from 1kHz to 50kHz;
- At modulation frequencies of 16 MHz to 31.9999 MHz - 1 kHz to 25 kHz from;
- At modulation frequencies from 0.14 MHz to 15.9999 MHz - from 1kHz to 100kHz but not more than 0,02 f;
The frequency of the internal modulation source in the "World Cup" of the instrument high-frequency signal generator G4-165 - 400 Hz, 1000 Hz;
Frequency of the external modulation source in the "World Cup" - from 30Hz to 60000Gts;
Limits set the frequency deviation signal generator unit high-G4-165 depending on carrier frequency corresponds to the values ​​specified in Table 1;
 
Table 1: Limits of installation of the frequency deviation signal generator unit high- G4-165 depending on carrier frequency
Harmonic
Modulation index
The modulating frequency
Carrier frequency
0.3
30%
1kHz
from 0.14 MHz to 30 MHz
1%
90%
1kHz
from 0.14 MHz to 30 MHz
0.6
80%
1kHz
0.2 MHz and 1 MHz
2%
80%
from 0.03 kHz to 20 kHz but not more than 0,02 f
from 0.14 MHz to 129.9999 MHz
 
The margin of error set the amount of frequency deviation signal generator unit high G4-165:
- At a frequency of 1000 Hz modulating signal - no more than ± (0,05 Δƒ +1 ed.sch.) kHz;
- In the range of modulating frequencies from 0.03 kHz to 60kGts - no more than ± (0,075 Δƒ +1 ed.sch.) kHz;
Harmonic envelope "FM" signal in the frequency range from 10MHz to 11.5 MHz, 73.9999 MHz to 64MGts from 88MGts to 107.9999 MHz:
- At 1 kHz modulation frequency and deviation 75kGts - no more than 0.05%;
- With integrated stereo modulation - no more than 0.3%;
Harmonic signal generator unit high G4-165 with a maximum deviation in the remaining range of carrier frequencies - no more than 1%;
THD in the range of modulating frequencies from 0.03 kHz to a maximum deviation 60kGts - less than 2%;
Operation mode setup time unit signal generator high G4-165 - 30 minutes
Power requirement:
- AC - 220V ± 22V;
- Frequency - 50Hz ± 0,5 Hz;
- The harmonic content - up to 5%;
Time of continuous operation of the device high-frequency signal generator G4-165 - at least 8 hours;
Power consumption - less than 90V · A;
Mean time unit signal generator G4-165 high-failures - at least 6,000 hours;
Dimensions - 486h173h482mm;
Weight - not more than 25kg.
The manufacturer guarantees the quality of the instrument high-frequency signal generator G4-165 technical requirements specifications, subject to the consumer the terms and conditions of storage, transportation, installation, operation, established specifications and operational documents.
Rate the product: G4-165
Number of views: 2326
Product rating: 4.5
Number of grades: 403
* rating and all product statistics are updated once a month; information is current as of 17 April 2024

Photos: G4-165

G4-165 generator image.

G4-165 generator image.

G4-165 front view.

G4-165 front view.

G4-165 side view.

G4-165 side view.

G4-165 rear view.

G4-165 rear view.

G4-165 overhead view.

G4-165 overhead view.

G4-165 bottom view.

G4-165 bottom view.

Our works(35)

Installation of the lodgement and the stand STM-15000U.01

Installation of the lodgement and the STM-15000U.01 stand

Connecting the brake stand STM-15000U

Connecting the brake stand STM-15000U

Connecting a low-profile stand STM-3500MN

Connecting a low-profile stand STM-3500MN

Installation of a two-speed stand STM-15000U.01

Installation of a two-speed stand STM-15000U.01

Work on the installation of the line of maintenance of trucks

Work on the installation of the line of maintenance of trucks

Poll

How did you find out about zapadpribor.com?

search engines

exhibition

online media

printed editions

colleagues advice

Vote

Leading online store Zapadpribor - a huge selection of measuring equipment for the best value and quality. So you can buy inexpensive devices, we monitor competitors' prices and are always ready to offer a lower price. We only sell quality products at the best prices. On our site you can buy cheaply as the latest innovations and proven equipment from the best manufacturers.

The site includes a special offer «buy at the best price» - if other Internet resources (bulletin board, forum or announcement of another online service) in products presented on our site, the lower price, we will sell it to you even cheaper! Buyers also additional discount for leaving a review or photo of use of our products.

In the price list contains not the whole range of products offered. Prices of goods, not included in the price list can learn to contact the manager. Also, our managers You can get detailed information about how cheap and profitable to buy instrumentation wholesale and retail. Telephone and e-mail for advice on the purchase , delivery or receipt are shown on the description of the goods. We have the most qualified staff, quality equipment and the best price.

 

Online store Zapadpribor - the official manufacturer's dealer test equipment. Our goal - selling high quality goods with best price offer and service to our customers. Our store can not only sell you the necessary instrument, but also offer additional services to its calibration, repair and installation. That you have a pleasant experience when shopping on our site, we have provided special gifts guaranteed to the most popular products.

 

We offer fast international shipping to almost every country in the world: Australia, Austria, Azerbaijan, Albania, Algeria, Anguilla, Angola, Antigua and Barbuda, Argentina, Aruba,  Bahamas, Bangladesh, Barbados, Bahrain, Belize, Belgium, Benin, Bermuda, Bulgaria, Bolivia, Bonaire, Sint-E. and Saba, Bosnia and Herzegovina, Botswana, Brazil, British Virgin Islands, Brunei Darussalam, Burkina Faso, Burundi, Bhutan, VietNam, Vanuatu, Vatican City, Venezuela, Armenia, Gabon, Guyana, Haiti, Gamia, Gambia, Ghana, Guatemala, Guinea, Gibraltar, Honduras, Hong Kong, Grenada, Greenland, Greece, Georgia, Denmark, Democratic Republic of the Congo, Jersey, Djibouti, Dominica, Dominican Republic, Ecuador, Eswatine, Estonia, Ethiopia, Egypt, Zambia, Zimbabwe, Jordan Indonesia, Ireland, Iceland, Spain, Italy, Cape Verde, Kazakhstan, Cayman Islands, Cambodia, Cameroon, Canada, Qatar, Kenya, Kyrgyzstan, China, Cyprus, Kiribati, Colombia, Comoros, Congo, Korea (Rep.), Costa Rica, Kot-d'Ivoire, Cuba, Kuwait, Curacao, Laos, Latvia, Lesotho, Lithuania, Liberia, Lebanon, Libya, Liechtenstein, Luxembourg, Myanmar, Mauritius, Mauritania, Madagascar, Macao, Malawi, Malaysia, Mali, Maldives, Malta, Morocco, Mexico, Mozambique, Moldova, Monaco, Monaco, Namibia, Nauru, Nepal, Niger, Nigeria, Netherlands, Germany, New Zealand, New Caledonia, Norway, UAE, Oman, Cook Islands, Pakistan, Palestine, Panama, Papua New Guinea, Paraguay, Peru, South Africa, Poland, Portugal, Republic of Chad, Rwanda, Romania, El Salvador, Samoa, San Marino, Saudi Arabia, Swaziland, Seychelles, Senegal, Saint Vincent and the Grenadines, Saint Kitts and Nevis, Saint Lucia, Serbia, Singapore, Sint Maarten, Slovakia, Slovenia, Solomon Islands, United Kingdom of Great Britain and Northern Ireland, Sudan, Suriname, East Timor (Timor-Leste), USA, Sierra Leone, Tajikistan, Taiwan, Thailand, Tanzania (United Republic of), Togo, Tonga, Trinidad and Tobago, Tuvalu, Tunisia, Turkey, Turkmenistan, Uganda, Hungary, Uzbekistan, Uruguay, Faroe Islands, Fiji, Philippines, Finland, France, French Polynesia, Croatia, Central African Republic, Czech Republic, Chile, Montenegro, Switzerland, Sweden, Sri Lanka, Jamaica, Japan.

We also provide such metrological procedure: calibration, tare, graduated, testing of measuring instruments.

The online store takes an active part in such procedures as electronic bidding, tender, auction.

If there is no site in the descriptive information you need on the device you can always turn to us for help. Our qualified managers will update for you on the technical characteristics of the device from its technical documentation: user manual, certificate, form, operating instructions, diagram. If necessary, we will take a photo of your device, or a device stand. You can leave feedback on the unit purchased from us, the meter, the device, indicator, or product. Your review for your approval will be published on the site without contact information.

 

Description of the instruments taken from the technical documentation or technical literature. Most pictures of products made directly by our experts prior to shipment of goods. In the description of the device provided the main technical characteristics of the instrument: nominal measuring range, accuracy class, scale, supply voltage, size (size), weight. If the site you see the discrepancy device name (model) specifications, photo or documents attached - let us know - you will get a useful gift with-selling device.

 

While the need to clarify the overall weight and size or the size of the individual meter you can in our service center. If you need our engineers will help you choose the most complete analog or a suitable replacement for the device you are interested. All counterparts and replacement will be tested in one of our laboratories with the full compliance to your requirements.

In the technical documentation for each device or product, information is provided on the list and amount of precious metals content. The documentation gives the exact weight in grams of precious metals: Au gold, palladium Pd, platinum Pt, silver Ag, tantalum Ta and other platinum group metals (PGM) per unit item. These precious metals are found in nature in very limited quantities and therefore have such a high price.

On our website you can familiarize yourself with the technical characteristics of devices and obtain information on the content of precious metals in devices and radio components manufactured in the USSR. We draw your attention to the fact that often the actual content of precious metals differs by 10-25% from the reference one in a smaller direction! The price of precious metals will depend on their value and mass in grams.

All text and graphic information on the site is informative. The color, shade, material, geometric dimensions, weight, content, delivery set and other parameters of the goods presented on the site may vary depending on the batch of production and year of manufacture. Check with the sales department for more information.

 

If you can make repairs to the device yourself, our engineers can provide you with a complete set of necessary technical documentation: circuit diagram TO, ER, FD, PS. We also have an extensive database of technical and metrological documents: technical specifications (TS), the terms of reference (TOR), GOST (DSTU), the industry standard (OST) test procedure, the method of certification, verification scheme for more than 3,500 types of measuring equipment from the manufacturer this equipment. From the site you can download all the necessary software (the software driver) is required for the product purchased.

We carries out repairs and maintenance of measuring equipment in more than 75 different factories of the former Soviet Union and CIS.

We also have a library of legal documents that are related to our field of activity: the law, code, ordinance, decree, temporary position.