Equipment for maintenance checkup >> - Our work on installation of equipment for inspection

Diagnostic Laboratory of the technical control in the Zaporizhzhia region

Location diagnostic laboratory: Zaporizhia region.

Activities: maintenance of cars. Service stations. Sink.  

Facilities: garage type.
 

     Below shows the location of devices and work station organization.
     If you want to view more photos - just click on it.
 
     Measurement tonovanosti side glass conduct by taumetr Tonik.
 
Measurement tonovanosti side glass conduct by taumetr Tonik

     Toning windshield as the car checked by appliance Tonik.
 
Toning windshield as the car checked by appliance Tonik

     Installing an electromagnetic sensor Lyuftomir ISL-M to car wheels.
 
Installing an electromagnetic sensor Lyuftomir ISL-M to car wheels

     Lyuftomir ISL-M is installed on the steering wheel of the car. The device is ready to measure the backlash.
 
Lyuftomir ISL-M is installed on the steering wheel of the car and ready to measure the backlash

     Smokemeters Infrakar D1-3.02 LTK is used for measuring smoke emissions of cars with diesel engines.
 
Smokemeters Infrakar D1-3.02 LTK is used for measuring smoke emissions of cars with diesel engines

     Infrakar M2T.02 gas analyzer used to analyze the emissions of cars with gasoline engines.
 
Infrakar M2T.02 gas analyzer used to analyze the emissions of cars with gasoline engines

      Measurement of the noise level of the vehicle's engine occurs using a sound Noise measure.
 
Measurement of the noise level of the vehicle's engine occurs using a sound Noise measure

     Measurement of noise at the car driver.
 
Measurement of noise at the car driver

     Measurement noise exhaust pipes the car.
 
Measurement noise exhaust pipes the car

     Measuring the frequency of movement of wiper blades takes place by using the stopwatch.
 
Measuring the frequency of movement of wiper blades takes place by using the stopwatch

     Stopwatch is also used to measure the parameters of the turning vehicle signals: the frequency of flashes indicator lamps, a glimpse of the first occurrence of the delay, combustion duration and cycle time between sparks.
 
Stopwatch is used to measure the parameters of the turning vehicle signals

     To measure the moment of tightening mounting drives, or outline of wheels used dynamometer key.
 
To measure the moment of tightening mounting drives, or outline of wheels used dynamometer key.

     To measure the width does not erase bands on the zone of the blades using a metal ruler.
 
To measure the width does not erase bands on the zone of the blades using a metal ruler.

     The height of the tread pattern is measured by depth.
 
The height of the tread pattern is measured by depth.

     There is a car headlight configuration.
 
There is a car headlight configuration.

     The measurement of the intensity of the headlights of the car is carried out using a photometer.
 
The measurement of the intensity of the headlights of the car is carried out using a photometer

     In the diagnostic laboratory are also present all the instruments needed to test suspension and brake systems: tester side enters, tester shock absorbers, brake stand and backlash detector.
 
Tester side enters, tester shock absorbers, brake stand and backlash detector

     Backlash detector.
 
Backlash detector

     Hydraulic installation of the backlash detector.
 
Hydraulic installation of the backlash detector

      At the inspection station is also present for the elevator cars.
 
At the inspection station is also present for the elevator cars

     At stations also present alignment stand.
 
At stations also present alignment stand

     The appearance of the premises where the laboratory for the inspection of cars. Under one roof are the inspection laboratory, car wash and station vehicle maintenance.
 
The inspection laboratory. car wash and station vehicle maintenance

     Director of the laboratory inspection of vehicles.
 
Director of the laboratory inspection of vehicles.

Photos: Diagnostic Laboratory of the technical control in the Zaporizhzhia region

At stations also present alignment stand.
At stations also present alignment stand.
Measurement tonovanosti side glass conduct by taumetr Tonik.
Measurement tonovanosti side glass conduct by taumetr Tonik.
Toning windshield as the car checked by appliance Tonik.
Toning windshield as the car checked by appliance Tonik.
Installing an electromagnetic sensor Lyuftomir ISL-M to car wheels.
Installing an electromagnetic sensor Lyuftomir ISL-M to car wheels.
Lyuftomir ISL-M is installed on the steering wheel of the car and ready to measure the backlash.
Lyuftomir ISL-M is installed on the steering wheel of the car and ready to measure the backlash.
Smokemeters Infrakar D1-3.02 LTK is used for measuring smoke emissions of cars with diesel engines.
Smokemeters Infrakar D1-3.02 LTK is used for measuring smoke emissions of cars with diesel engines.
Infrakar M2T.02 gas analyzer used to analyze the emissions of cars with gasoline engines.
Infrakar M2T.02 gas analyzer used to analyze the emissions of cars with gasoline engines.
Measurement of the noise level of the vehicle\'s engine occurs using a sound Noise measure.
Measurement of the noise level of the vehicle\'s engine occurs using a sound Noise measure.
Measurement of noise at the car driver.
Measurement of noise at the car driver.
Measurement noise exhaust pipes the car.
Measurement noise exhaust pipes the car.
Measuring the frequency of movement of wiper blades takes place by using the stopwatch.
Measuring the frequency of movement of wiper blades takes place by using the stopwatch.
Stopwatch is used to measure the parameters of the turning vehicle signals.
Stopwatch is used to measure the parameters of the turning vehicle signals.
To measure the moment of tightening mounting drives, or outline of wheels used dynamometer key.
To measure the moment of tightening mounting drives, or outline of wheels used dynamometer key.
To measure the width does not erase bands on the zone of the blades using a metal ruler.
To measure the width does not erase bands on the zone of the blades using a metal ruler.
The height of the tread pattern is measured by depth.
The height of the tread pattern is measured by depth.
There is a car headlight configuration.
There is a car headlight configuration.
The measurement of the intensity of the headlights of the car is carried out using a photometer.
The measurement of the intensity of the headlights of the car is carried out using a photometer.
Tester side enters, tester shock absorbers, brake stand and backlash detector.
Tester side enters, tester shock absorbers, brake stand and backlash detector.
Backlash detector.
Backlash detector.
Hydraulic installation of the backlash detector.
Hydraulic installation of the backlash detector.
At the inspection station is also present for the elevator cars.
At the inspection station is also present for the elevator cars.
The inspection laboratory. car wash and station vehicle maintenance.
The inspection laboratory. car wash and station vehicle maintenance.
Director of the laboratory inspection of vehicles.
Director of the laboratory inspection of vehicles.