Equipment for maintenance checkup >> - Examples of the use of diagnostic equipment in the laboratories TO KTS.

Diagnostic Laboratory in Novosibirsk.

For order is possible effectively delivery of any quantity.

Location diagnostic laboratory: Novosibirsk.

Type of activity: Technical control cars.

Premises: a tunnel type.

 

Below is shown the location of equipment and robot stations.

If you want to see pictures details - just click on it.

 

The type of line inspection. Used premises tunneling type.

 

The view line technical inspection.

 

The rack with devices. Here is located the the equipment for inspection.

 

The rack with devices.

 

General view of the technical inspection. Brake stand and backlash-detector are on the lookout hole.

 

General view of the technical inspection.

 

At the station used monobloc brake stand . Therefore it was necessary to block the viewing hole.

 

 The station is used monobloc brake tester.

 

Type of brake tester.

 

Type of brake tester.

 

All measurement results are displayed on the monitor computing system.

 

All measurement results are displayed on the monitor computing system.

 

Also, the results of measurements on the brake stand can be seen on the analog board.

 

The results of measurements on the analog board.

 

At the station, used hydraulic backlash detector.

 

At the station, used hydraulic play detector.

 

Vehicle check for backlash detector.

 

Vehicle check for play detector.

 

Vehicle check on the observation well.

 

Vehicle check on the observation well.

 

Checking the backlash by backlash detector.

 

Checking the backlash by backlash detector.

 

To check the inertial brake system used loader trailer coupling trailers.

 

To check the inertial brake system used loader trailer coupling trailers.

 

To check the headlights used photometer IPF-01.

 

To check the headlights used photometer IPF-01.

 

Level of light transmittance glass that is measured TONIK.

 

Level of light transmittance glass that is measured TONIK.

 

To check the loose steering used backlash measurer.

 

To check the loose steering used backlash measurer.

 

When checking the backlash steering used the measuring sensor.

 

When checking the backlash steering used the measuring sensor.

 

To test noise of the motor is used sound level meter.

 

 To test noise of the motor is used sound level meter.

 

Checking of vehicle exhaust. Note the discharge hose to the exhaust gases. It allows  you to measure the gas analyzer and opacimeter in the room.

 

Checking car exhausts.

 

At registration of the results of the inspection vehicle, you can also issue your auto insurance.

 

You can also issue your auto insurance.

 

Gate point inspection.

 

Gate point inspection.

 

Entry vehicle to pass inspection.

 

Entry vehicle to pass inspection.

 

Check out the car after passing technical inspection.

 

Check out the car after passing technical inspection.

Photos: Diagnostic Laboratory in Novosibirsk.

The type of line inspection.
The type of line inspection.
The rack with devices.
The rack with devices.
General view of the technical inspection.
General view of the technical inspection.
The station is used monobloc brake tester.
The station is used monobloc brake tester.
Type of brake tester.
Type of brake tester.
All the measurement results are displayed on a computer monitor.
All the measurement results are displayed on a computer monitor.
The results of measurements on the analog board.
The results of measurements on the analog board.
The station is used hydraulic backlash detector.
The station is used hydraulic backlash detector.
Check car backlash detector.
Check car backlash detector.
Check car observation pit.
Check car observation pit.
Checking the backlash by backlash detector.
Checking the backlash by backlash detector.
To check the inertial brake system used loader trailer coupling trailers.
To check the inertial brake system used loader trailer coupling trailers.
To check headlamps used a photometer IPF-01.
To check headlamps used a photometer IPF-01.
Level of light transmission glasses measured with TONIK.
Level of light transmission glasses measured with TONIK.
To check the loose steering used backlash measurer.
To check the loose steering used backlash measurer.
When checking the backlash steering used the measuring sensor.
When checking the backlash steering used the measuring sensor.
To test noise of the motor is used sound level meter.
To test noise of the motor is used sound level meter.
Checking of vehicle exhaust.
Checking of vehicle exhaust.
You can also place your auto insurance.
You can also place your auto insurance.
Gates point inspection.
Gates point inspection.
Entry vehicle for the passage of technical inspection.
Entry vehicle for the passage of technical inspection.
Check out the car after passing.
Check out the car after passing.


Яндекс цитирования