Laboratory equipment >> tensile testing machines

2038 R-0,05

Breaking Machine 2038 R-0, 05.
Breaking car 2038 R-0,05 (2038 P0,05, 2038 R 0,05)
Designed for testing of samples of wire, metal belts, rubber, plastics, rubber and textile fibers in tension and with the highest ultimate load 500N, as well as compression tests in the laboratory-type facilities;
Maximum limit load - 0.5 kN;
Measuring ranges of loads - up to 0.05 kN, 0.5 H.

More info ...

2054 R-5

Breaking car 2054 P-5.
Breaking Machine 2054 R-5 (2054 R5, 2054 R 5)
Designed for testing of samples of wire, metal belts, rubber, plastics, rubber and textile yarn tensile and compressive test, the laboratory-type facilities;
Maximum limit load - 50kN;
Measuring ranges of loads - up to 5kN, do50kN.

More info ...

2055 R-0,5

Breaking car 2055 P-0, 5.
Breaking car 2055 R-0,5 (2055 R0,5, 2055 R 0,5)
Designed for the tensile test specimens of plastic, ferrous and nonferrous metals at normal temperatures;
Maximum limit load - 5kN;
Accuracy - ± 1%.

More info ...

2161 R-5

Breaking car 2161 P-5.
Breaking Machine 2161 R-5 (2161 R5, 2161 R 5)
Designed for testing of samples of wire, metal belts, rubber, plastics, rubber and textile yarn tensile and compressive test, the laboratory-type facilities;
Maximum limit load - 5kN;
Accuracy - ± 1%.

More info ...

2166 R-5

Breaking car 2166 P-5.
Breaking Machine 2166 R-5 (2166 R5, 2166 R 5)
Designed for testing of samples of wire, metal belts, rubber, plastics, rubber and textile yarn tensile and compressive test, the laboratory-type facilities;
Maximum limit load - 5kN;
Accuracy - ± 1%.

More info ...

2167 R-50

Breaking car 2167 P-50.
Breaking Machine 2167 R-50 (2167 R50, 2167 R 50)
Designed for testing of samples of wire, metal belts, rubber, plastics, rubber and textile yarn tensile and compressive test, the laboratory-type facilities;
Maximum limit load - 50kN;
Accuracy - ± 1%.

More info ...

I1090M

Breaking I1090M machine (I-1090-M, I 1090 M, I1090-M, I1090 M, I-1090M, I 1090M)
Designed to create a normalized value of the measure of force in the tensile tests of samples of plastics, rubber, ferrous and nonferrous metals and other materials within the technical capabilities;
Measuring range load - 1kN-10kN, 100kN-4kN;
Accuracy of measurements - 1%.

More info ...

I1140M

Breaking I1140M machine (I-1140-M, I 1140 M, I1140-M, I1140 M, I-1140M, I 1140M)
Designed to create a normalized value of the measure of force in the tensile tests of samples of plastics, rubber, ferrous and nonferrous metals and other materials within the technical capabilities;

More info ...

I1147M

Breaking I1147M machine (I-1147-M, I 1147 M, I1147-M, I1147 M, I-1147M, I 1147M)
Designed to create a normalized value of the measure of force in the tensile tests of samples of plastics, rubber, ferrous and nonferrous metals and other materials within the technical capabilities;

More info ...

I1185M

Breaking I1185M machine (I-1185-M, I 1185 M, I1185-M, I1185 M, I-1185M, I 1185M)
Designed to create a normalized value of the measure of force in the tensile tests of samples of plastics, rubber, ferrous and nonferrous metals and other materials within the technical capabilities;
Measuring range load - 1kN-10kN, 100kN-4kN;
Accuracy of measurements - 1%.

More info ...

I4301M

Breaking I4301M machine (I-4301-M, I 4301 M, I4301-M, I4301 M, I-4301M, I 4301M)
Designed to create a normalized value of the measure of force in the tensile tests of samples of plastics, rubber, ferrous and nonferrous metals and other materials within the technical capabilities.

More info ...

IP 5158-0.1

Tearing machine IP 5158-0,1.
Breaking Machine IP 5158-0,1 (IP5158-0,1, FE-5158-0,1)
Designed to determine the deformation and strength characteristics of various materials;
Maximum limit load - 0.1 kN;
The range of measurement error in the loading of 1% - 4-100 of the measured value.

More info ...

IP 5158-0.5

Tearing machine IP 5158-0,5.
Breaking Machine IP 5158-0,5 (IP5158-0,5, IP-5158-0,5)
Designed to determine the deformation and strength characteristics of various materials;
Maximum limit load - 0.5 kN;
The range of measurement error in the loading of 1% - 20-500 of the measured value.

More info ...

IP 5158-1.0

Tearing machine IP 5158-1,0.
Breaking Machine IP 5158-1,0 (IP5158-1,0, IP-5158-1,0)
Designed to determine the deformation and strength characteristics of various materials;
Maximum limit load - 1.0 kN;
The range of measurement error in the loading of 1% - 40-1000 of the measured value.

More info ...

IP 5158-2.5

Tearing machine IP 5158-2,5.
Breaking Machine IP 5158-2,5 (IP5158-2,5, IP-5158-2,5)
Designed to determine the deformation and strength characteristics of various materials;
Maximum limit load - 2.5 kN;
The range of measurement error in the loading of 1% - 80-2500 of the measured value.

More info ...

IR 5040-5-01

Tearing machine IR 5040-5-01.
Breaking Machine IR 5040-5-01 (IR5040-5-01, IR-5040-5-01, IR 5040-501, IR 50405-01)
It is intended samples for testing of plastics, rubber, ferrous and nonferrous metals (including wire and tape, using special hooks), and other materials and products in tension, compression and bending;
Maximum limit load - 5kN;
Limits of measurement error in the load range of loads from 0.2 kN to 5kN - ± 1%.

More info ...

IR 5040-5-02

Tearing machine IR 5040-5-02.
Breaking Machine IR 5040-5-02 (IR5040-5-02, IR-5040-5-02, IR 5040-502, IR 50405-02)
It is intended samples for testing of plastics, rubber, ferrous and nonferrous metals (including wire and tape, using special hooks), and other materials and products in tension, compression and bending;
Maximum limit load - 5kN;
Limits of measurement error in the load range of loads from 0.2 kN to 5kN - ± 1%.

More info ...

IR 5040-5-03

Tearing machine IR 5040-5-03.
Breaking Machine IR 5040-5-03 (IR5040-5-03, IR-5040-5-03, IR 5040-503, IR 50405-03)
It is intended samples for testing of plastics, rubber, ferrous and nonferrous metals (including wire and tape, using special hooks), and other materials and products in tension, compression and bending;
Maximum limit load - 5kN;
Limits of measurement error in the load range of loads from 0.2 kN to 5kN - ± 1%.

More info ...

IR 5040-5-10

  |   290 000 UAH
Tearing machine IR 5040-5-10.
Breaking Machine IR 5040-5-10 (IR5040-5-10, IR-5040-5-10, IR 5040-510, IR 50405-10)
It is intended samples for testing of plastics, rubber, ferrous and nonferrous metals (including wire and tape, using special hooks), and other materials and products in tension, compression and bending;
Maximum limit load - 5kN;
Limits of measurement error in the load range of loads from 0.2 kN to 5kN - ± 1%.
 

More info ...

IR 5040-5-11

  |   350 066 UAH
Tearing machine IR 5040-5-11.
Breaking Machine IR 5040-5-11 (IR5040-5-11, IR-5040-5-11, IR 5040-511, IR 50405-11)
It is intended samples for testing of plastics, rubber, ferrous and nonferrous metals (including wire and tape, using special hooks), and other materials and products in tension, compression and bending;
Maximum limit load - 5kN;
Limits of measurement error in the load range of loads from 0.2 kN to 5kN - ± 1%.

More info ...

IR 5040-5-12

  |   390 034 UAH
Tearing machine IR 5040-5-12.
Breaking Machine IR 5040-5-12 (IR5040-5-12, IR-5040-5-12, IR 5040-512, IR 50405-12)
It is intended samples for testing of plastics, rubber, ferrous and nonferrous metals (including wire and tape, using special hooks), and other materials and products in tension, compression and bending;
Maximum limit load - 5kN;
Limits of measurement error in the load range of loads from 0.2 kN to 5kN - ± 1%.

More info ...

IR 5047-50-01

IR tearing machine 5047-50-01.
Breaking Machine IR 5047-50-01 (IR5047-50-01, IR-5047-50-01, IR 5047-5001, IR 504750-01)
It is intended samples for testing of plastics, rubber, ferrous and nonferrous metals (including wire and tape, using special hooks), and other materials and products in tension, compression and bending;
Maximum limit load - 50kN;
Limits of measurement error in the load range of loads up to 50kN of 2kN - ± 1%.

More info ...

IR 5047-50-02

IR tearing machine 5047-50-02.
Breaking Machine IR 5047-50-02 (IR5047-50-02, IR-5047-50-02, IR 5047-5002, IR 504750-02)
It is intended samples for testing of plastics, rubber, ferrous and nonferrous metals (including wire and tape, using special hooks), and other materials and products in tension, compression and bending;
Maximum limit load - 50kN;
Limits of measurement error in the load range of loads up to 50kN of 2kN - ± 1%.

More info ...

IR 5047-50-10

  |   380 000 UAH
IR tearing machine 5047-50-10.
Breaking Machine IR 5047-50-10 (IR5047-50-10, IR-5047-50-10, IR 5047-5010, IR 504750-10)
It is intended samples for testing of plastics, rubber, ferrous and nonferrous metals (including wire and tape, using special hooks), and other materials and products in tension, compression and bending;
Maximum limit load - 50kN;
Limits of measurement error in the load range of loads up to 50kN of 2kN - ± 1%.

More info ...

IR 5047-50-11

  |   416 700 UAH
IR tearing machine 5047-50-11.
Breaking Machine IR 5047-50-11 (IR5047-50-11, IR-5047-50-11, IR 5047-5011, IR 504750-11)
It is intended samples for testing of plastics, rubber, ferrous and nonferrous metals (including wire and tape, using special hooks), and other materials and products in tension, compression and bending;
Maximum limit load - 50kN;
Limits of measurement error in the load range of loads up to 50kN of 2kN - ± 1%.

More info ...

IR 5060-0,05

94 500 RUB   |   21 000 UAH
Tearing machine IR 5060-0,05.
Breaking Machine IR 5060-0,05 (IR5060-0,05, IR-5060-0,05)
Designed to determine the strength of cotton fibers;
Maximum limit load - 0.05 kN;
Measuring ranges of loads - 30N-0H, 0H-50H;
Limits of error siloizmereniya:
- The direct course - ± 1% (over 10);
- In the range of loads - ± 0,1 h (0-10);
- The direct course - ± 1% (over 25);
- In the range of loads - ± 0,25 N (0-25).

More info ...

IR 5061-0,05

210 000 RUB   |   46 670 UAH
Tearing machine IR 5061-0,05.
Breaking Machine IR 5061-0,05 (IR5061-0,05, IR-5061-0,05)
Designed to determine the breaking load and elongation at break when tested textile yarns;
Maximum limit load - 0.05 kN;
Measuring ranges of deformation (measuring the distance between the grips) - from 0mm to 300mm;
Maximum permissible error of measurement of deformation - ± 1 mm.

More info ...

IR 5062-0,5

247 650 RUB   |   55 034 UAH
Tearing machine IR 0562-0,5.
Breaking Machine IR 0562-0,5 (IR0562-0,5, IR-0562-0,5)
Designed to determine the breaking load and elongation at break when tested textile yarns;
Maximum limit load - 0.5 kN;
Measuring ranges of deformation (measuring the distance between the grips) - from 0mm to 300mm;
Maximum permissible error of measurement of deformation - ± 1 mm.

More info ...

IR 5074-3

382 500 RUB   |   85 000 UAH
Breaking Machine TS 5074-3.
Breaking Machine IR 5074-3 (IR5074-3, IR-5074-3)
Designed for testing of materials from natural and synthetic fibers, yarn in hanks to the gap, knitted and nonwoven materials for punching the ball;
Maximum limit load - 3kN;
Measuring ranges for load;
- A range of - 0kN-0, 50kN;
- A range of B - 0kN-1, 0kN;
- In the range - 0kN-3 0kN;
Measuring range of deformation (displacement of the active capture) - 0mm-200mm.

More info ...

ИР 5081-0,1

available: 2 pieces

ИР 5081-0,1 машина электромеханическая разрывная двухзонная испытательная с микропроцессорным пультом оператора и асинхронным сервоприводом используется для проведения физико-механических испытаний образцов из пластмасс, резины, черных и цветных металлов, текстильных и других материалов на растяжение, сжатие, изгиб, осадку, сплющивание, остаточную деформацию, отслаивание, скалывание, срез, сдвиг и другие в пределах технических возможностей машины.

Диапазон испытательных нагрузок - от 0 до 0,1 кН.

Количество испытательных зон - 2.


More info ...

ИР 5081-0,5

available: 1 piece

ИР 5081-0,5 машина электромеханическая разрывная двухзонная испытательная с микропроцессорным пультом оператора и асинхронным сервоприводом используется для проведения физико-механических испытаний образцов из пластмасс, резины, черных и цветных металлов, текстильных и других материалов на растяжение, сжатие, изгиб, осадку, сплющивание, остаточную деформацию, отслаивание, скалывание, срез, сдвиг и другие в пределах технических возможностей машины.

Диапазон испытательных нагрузок - от 0 до 0,5 кН.

Количество испытательных зон - 2.


More info ...

ИР 5081-1

available: 2 pieces

ИР 5081-1 машина электромеханическая разрывная двухзонная испытательная с микропроцессорным пультом оператора и асинхронным сервоприводом используется для проведения физико-механических испытаний образцов из пластмасс, резины, черных и цветных металлов, текстильных и других материалов на растяжение, сжатие, изгиб, осадку, сплющивание, остаточную деформацию, отслаивание, скалывание, срез, сдвиг и другие в пределах технических возможностей машины.

Диапазон испытательных нагрузок - от 0 до 1 кН.

Количество испытательных зон - 2.


More info ...

ИР 5081-10

available: 1 piece

ИР 5081-10 машина электромеханическая разрывная двухзонная испытательная с микропроцессорным пультом оператора и асинхронным сервоприводом используется для проведения физико-механических испытаний образцов из пластмасс, резины, черных и цветных металлов, текстильных и других материалов на растяжение, сжатие, изгиб, осадку, сплющивание, остаточную деформацию, отслаивание, скалывание, срез, сдвиг и другие в пределах технических возможностей машины.

Диапазон испытательных нагрузок - от 0 до 10 кН.

Количество испытательных зон - 2.


More info ...

ИР 5081-2

available: 1 piece

ИР 5081-2 машина электромеханическая разрывная двухзонная испытательная с микропроцессорным пультом оператора и асинхронным сервоприводом используется для проведения физико-механических испытаний образцов из пластмасс, резины, черных и цветных металлов, текстильных и других материалов на растяжение, сжатие, изгиб, осадку, сплющивание, остаточную деформацию, отслаивание, скалывание, срез, сдвиг и другие в пределах технических возможностей машины.

Диапазон испытательных нагрузок - от 0 до 2 кН.

Количество испытательных зон - 2.


More info ...

ИР 5081-5

available: 2 pieces

ИР 5081-5 машина электромеханическая разрывная двухзонная испытательная с микропроцессорным пультом оператора и асинхронным сервоприводом используется для проведения физико-механических испытаний образцов из пластмасс, резины, черных и цветных металлов, текстильных и других материалов на растяжение, сжатие, изгиб, осадку, сплющивание, остаточную деформацию, отслаивание, скалывание, срез, сдвиг и другие в пределах технических возможностей машины.

Диапазон испытательных нагрузок - от 0 до 5 кН.

Количество испытательных зон - 2.


More info ...

IR 5113-100-10

  |   425 000 UAH
Tearing machine IR 5113-100-10.
Breaking Machine IR 5113-100-10 (IR5113-100-10, IR-5113-100-10, IR 5113-10010, IR 5113100-10)
It is intended samples for testing of plastics, rubber, ferrous and nonferrous metals (including wire and tape, using special hooks), and other materials and products in tension, compression and bending;
Maximum limit load - 100kN;
Limits of measurement error in the load range of loads up to 100kN on 4kN - ± 1%.

More info ...

IR 5113-100-11

  |   453 334 UAH
Tearing machine IR 5113-100-11.
Breaking Machine IR 5113-100-11 (IR5113-100-11, IR-5113-100-11, IR 5113-10011, IR 5113100-11)
It is intended samples for testing of plastics, rubber, ferrous and nonferrous metals (including wire and tape, using special hooks), and other materials and products in tension, compression and bending;
Maximum limit load - 100kN;
Limits of measurement error in the load range of loads up to 100kN on 4kN - ± 1%.

More info ...

IR 5113-500-10

Tearing machine IR 5113-500-10.
Breaking Machine IR 5113-500-10 (IR5113-500-10, IR-5113-500-10, IR 5113-50010, IR 5113500-10)
It is intended samples for testing of plastics, rubber, ferrous and nonferrous metals (including wire and tape, using special hooks), and other materials and products in tension, compression and bending;
Maximum limit load - 500kN;
Limits of measurement error in the load range of loads up to 500kN on 4kN - ± 1%.

More info ...

IR 5113-500-11

Tearing machine IR 5113-500-11.
Breaking Machine IR 5113-500-11 (IR5113-500-11, IR-5113-500-11, IR 5113-50011, IR 5113500-11)
It is intended samples for testing of plastics, rubber, ferrous and nonferrous metals (including wire and tape, using special hooks), and other materials and products in tension, compression and bending;
Maximum limit load - 500kN;
Limits of measurement error in the load range of loads up to 500kN on 4kN - ± 1%.

More info ...

IR 5113-500-12

Tearing machine IR 5113-500-12.
Breaking Machine IR 5113-500-12 (IR5113-500-12, IR-5113-500-12, IR 5113-50012, IR 5113500-12)
It is intended samples for testing of plastics, rubber, ferrous and nonferrous metals (including wire and tape, using special hooks), and other materials and products in tension, compression and bending;
Maximum limit load - 500kN;
Limits of measurement error in the load range of loads up to 500kN on 4kN - ± 1%.

More info ...

IR 5143-200-10

  |   595 000 UAH
Tearing machine IR 5143-200-10.
Breaking Machine IR 5143-200-10 (IR5143-200-10, IR-5143-200-10, IR 5143-20010, IR 5143200-10)
It is intended samples for testing of plastics, rubber, ferrous and nonferrous metals (including wire and tape, using special hooks), and other materials and products in tension, compression and bending;
Maximum limit load - 200kN;
Limits of measurement error in the load range of loads up to 200kN on 8kN - ± 1%.

More info ...

IR 5143-200-11

  |   610 000 UAH
Tearing machine IR 5143-200-11.
Breaking Machine IR 5143-200-11 (IR5143-200-11, IR-5143-200-11, IR 5143-20011, IR 5143200-11)
It is intended samples for testing of plastics, rubber, ferrous and nonferrous metals (including wire and tape, using special hooks), and other materials and products in tension, compression and bending;
Maximum limit load - 200kN;
Limits of measurement error in the load range of loads up to 200kN on 8kN - ± 1%.

More info ...

IR 5143-500-10

Tearing machine IR 5143-500-10.
Breaking Machine IR 5143-500-10 (IR5143-500-10, IR-5143-500-10, IR 5143-50010, IR 5143500-10)
It is intended samples for testing of plastics, rubber, ferrous and nonferrous metals (including wire and tape, using special hooks), and other materials and products in tension, compression and bending;
Maximum limit load - 500kN;
Limits of measurement error in the load range of loads up to 500kN on 8kN - ± 1%.

More info ...

IR 5143-500-11

Tearing machine IR 5143-500-11.
Breaking Machine IR 5143-500-11 (IR5143-500-11, IR-5143-500-11, IR 5143-50011, IR 5143500-11)
It is intended samples for testing of plastics, rubber, ferrous and nonferrous metals (including wire and tape, using special hooks), and other materials and products in tension, compression and bending;
Maximum limit load - 500kN;
Limits of measurement error in the load range of loads up to 500kN on 8kN - ± 1%.

More info ...

IR 5143-500-12

Tearing machine IR 5143-500-12.
Breaking Machine IR 5143-500-12 (IR5143-500-12, IR-5143-500-12, IR 5143-50012, IR 5143500-12)
It is intended samples for testing of plastics, rubber, ferrous and nonferrous metals (including wire and tape, using special hooks), and other materials and products in tension, compression and bending;
Maximum limit load - 500kN;
Limits of measurement error in the load range of loads up to 500kN on 8kN - ± 1%.

More info ...

IR 5145-500-10

  |   766 667 UAH
Tearing machine IR 5145-500-10.
Breaking Machine IR 5145-500-10 (IR5145-500-10, IR-5145-500-10, IR 5145-50010, IR 5145500-10)
It is intended samples for testing of plastics, rubber, ferrous and nonferrous metals (including wire and tape, using special hooks), and other materials and products in tension, compression and bending;
Maximum limit load - 500kN;
Limits of measurement error in the load range of loads from 20kN up to 500kN - ± 1%.
 

More info ...

IR 5145-500-11

  |   800 000 UAH
Tearing machine IR 5145-500-11.
Breaking Machine IR 5145-500-11 (IR5145-500-11, IR-5145-500-11, IR 5145-50011, IR 5145500-11)
It is intended samples for testing of plastics, rubber, ferrous and nonferrous metals (including wire and tape, using special hooks), and other materials and products in tension, compression and bending;
Maximum limit load - 500kN;
Limits of measurement error in the load range of loads from 20kN up to 500kN - ± 1%.

More info ...

IR 5145-500-12

Tearing machine IR 5145-500-12.
Breaking Machine IR 5145-500-12 (IR5145-500-12, IR-5145-500-12, IR 5145-50012, IR 5145500-12)
It is intended samples for testing of plastics, rubber, ferrous and nonferrous metals (including wire and tape, using special hooks), and other materials and products in tension, compression and bending;
Maximum limit load - 500kN;
Limits of measurement error in the load range of loads from 20kN up to 500kN - ± 1%.

More info ...

IR-100

Tearing machine IR-100.
Breaking Machine IR-100 (IR100, IR 100)
It is designed for static testing of samples of metals, reinforcing steel, sheet and samples of round bars in tension at normal temperature;
Maximum limit load - 100kN;
Accuracy - ± 1%.

More info ...

IR-100.1

IR-100.1 machine image.
Testing machine IR-100.1 (IR100.1, IR 100.1, IR-1001)
Designed for static testing of standard samples of metals and alloys at a temperature of 20 ºC ± 10 ºC.
The highest load limit - 100kN.
Measuring ranges of loads - 2kN-100kN.

More info ...

IR-200

Tearing machine IR-200.
Breaking Machine IR-200 (IR200, IR 200)
It is designed for static testing of samples of metals, reinforcing steel, sheet and samples of round bars in tension at normal temperature;
Maximum limit load - 200kN;
Accuracy - ± 1%.

More info ...

IR-200.1

IR-200.1 machine image.
Testing machine IR-200.1 (IR200.1, IR 200.1, IR-2001)
Designed for static testing of standard samples of metals and alloys at a temperature of 20 ºC ± 10 ºC.
The highest load limit - 200kN.
Measuring ranges of loads - 4kN-200kN.

More info ...

IR-500.1

IR-500.1 machine image.
Testing machine IR-500.1 (IR500.1, IR 500.1, IR-5001)
It is designed for static testing of standard samples of metals and alloys at a temperature of 20 ºC ± 10 ºC.
The highest load limit - 500kN.
Measuring ranges loads - 10kN, 500kN.

More info ...

IR6053-100.0

2 453 710 RUB   |   736 114 UAH
IR6053-100.0 machine image.
Testing machine IR6053-100.0 (IR6053100.0, IR-6053-100.0, IR 6053 100.0, IR6053 100.0)
Designed for static testing of standard samples of metals in tension at 20 º C ± 15 º C;
The highest load limit - 100kN;
Measuring ranges of loads:
- 2kN-20kN;
- 5kN-50kN;
- 10kN, 100kN.

More info ...

IR6054-200.0

2 670 080 RUB   |   801 023 UAH
IR6054-200.0 machine image.
Testing machine IR6054-200.0 (IR6054200.0, IR-6054-200.0, IR 6054 200.0, IR6054 200.0)
Designed for static testing of standard samples of metals in tension at 20 ºC ± 15 ºC.
The highest load limit - 200kN.
Measuring ranges of loads:
- 4kN-40kN;
- 10kN, 100kN;
- 20kN, 200kN.

More info ...

IR6055-500.0

3 521 720 RUB   |   1 056 520 UAH
IR6055-500.0 machine image.
Testing machine IR6055-500.0 (IR6055500.0, IR-6055-500.0, IR 6055 500.0, IR6055 500.0)
Designed for static testing of standard samples of metals in tension at 20 ºC ± 15 ºC.
The highest load limit - 500kN.
Measuring ranges of loads:
- 10kN, 100kN;
- 20kN, 200kN;
- 50kN, 500kN.

More info ...

IR6055-500.0 (with long columns)

3 521 720 RUB   |   1 056 520 UAH
IR6055-500.0 machine image.
Testing machine IR6055-500.0 (with long columns) (IR6055500.0, IR-6055-500.0, IR 6055 500.0, IR6055 500.0)
It is designed for static testing of standard samples of metals in tension at a temperature of 20 ºC ± 15 ºC.
The highest load limit - 500kN.
Measuring ranges of loads:
- 10kN, 100kN;
- 200 kN, 20kN;
- 50kN, 500kN.

More info ...

MIR-1000K

Tearing machine MIR-1000K.
Tearing machine MIR-1000K (MIR1000K, MIR-1000-K, MIR 1000K, MIR 1000 K)
Maximum limit load - 1000kN;
The limits of permissible error of measurement:
- Load measuring range - ± 1%;
- Moving in a range of dimensions - ± 2%;
- Deformation of the limit range - ± 1%.

More info ...

MIR-100K

Tearing machine MIR-100K.
Tearing machine MIR-100K (MIR100K, MIR-100-K, MIR 100K, MIR 100 K)
Maximum limit load - 100kN;
The limits of permissible error of measurement:
- Load measuring range - ± 1%;
- Moving in a range of dimensions - ± 2%;
- Deformation of the limit range - ± 1%.

More info ...

MIR-2000K

Tearing machine MIR-2000K.
Tearing machine MIR-2000K (MIR2000K, MIR-2000-K, MIR 2000K, MIR 2000 K)
Maximum limit load - 2000kN;
The limits of permissible error of measurement:
- Load measuring range - ± 1%;
- Moving in a range of dimensions - ± 2%;
- Deformation of the limit range - ± 1%.

More info ...

MIR-200K

Tearing machine MIR-200K.
Tearing machine MIR-200K (MIR200K, MIR-200-K, MIR200K, MIR 200 K)
Maximum limit load - 200kN;
The limits of permissible error of measurement:
- Load measuring range - ± 1%;
- Moving in a range of dimensions - ± 2%;
- Deformation of the limit range - ± 1%.
 

More info ...

MIR-500K

Tearing machine MIR-500.
Tearing machine MIR-500K (MIR500K, MIR-500-K, MIR 500K, MIR 500 K)
Maximum limit load - 500kN;
The limits of permissible error of measurement:
- Load measuring range - ± 1%;
- Moving in a range of dimensions - ± 2%;
- Deformation of the limit range - ± 1%.

More info ...

MIRI-1000K

Tearing machine Miri-1000K.
Breaking Machine Miri-1000K (MIRI1000K, Miri-1000-K, MIRI 1000K, Miri 1000 K)
Maximum limit load - 1000kN;
The limits of permissible error of measurement:
- Load measuring range - ± 1%;
- Moving in a range of dimensions - ± 2%;
- Deformation of the limit range - ± 1%.

More info ...

MIRI-100K

Tearing machine Miri-100K.
Breaking Machine Miri-100K (MIRI100K, Miri-100-K, Miri 100K, Miri 100 K)
Maximum limit load - 100kN;
The limits of permissible error of measurement:
- Load measuring range - ± 1%;
- Moving in a range of dimensions - ± 2%;
- Deformation of the limit range - ± 1%.

More info ...

MIRI-2000K

Tearing machine Miri-2000K.
Breaking Machine Miri-2000K (MIRI2000K, Miri-2000-K, MIRI 2000K, Miri 2000 K)
Maximum limit load - 2000kN;
The limits of permissible error of measurement:
- Load measuring range - ± 1%;
- Moving in a range of dimensions - ± 2%;
- Deformation of the limit range - ± 1%.

More info ...

MIRI-200K

Tearing machine Miri-200K.
Breaking Machine Miri-200K (MIRI200K, Miri-200-K, MIRI 200 K, Miri 200 K)
Maximum limit load - 200kN;
The limits of permissible error of measurement:
- Load measuring range - ± 1%;
- Moving in a range of dimensions - ± 2%;
- Deformation of the limit range - ± 1%.
 

More info ...

MIRI-500K

Tearing machine Miri-500K.
Breaking Machine Miri-500K (MIRI500K, Miri-500-K, MIRI 500K, Miri 500 K)
Maximum limit load - 500kN;
The limits of permissible error of measurement:
- Load measuring range - ± 1%;
- Moving in a range of dimensions - ± 2%;
- Deformation of the limit range - ± 1%.

More info ...

MIRIV-50K

Tearing machine MIRIV-50K.
Breaking Machine MIRIV-50K (MIRIV50K, MIRIV-50-K, MIRIV 50K, MIRIV 50 K)
It is designed for static testing of samples of explosive materials in tension, bending, compression, split shift;
Maximum limit load:
- A zone of tension - 5kN;
- A zone of compression - 50kN.

More info ...

MIRK-500K

    Tearing machine MIRK-500K (MIRK500K; MIRK 500K; MIRK-500 K, MIRK-500-K, MIRK500 K; MIRK500-K)
    Tensile testing machine MIRK-500K - a product for static tensile test specimens of steel ropes and their products.
    The highest rated load - 500kN.
    The range of loading rates - 0.5 kN / s - 50kN / s.
    The width of the workspace - 400mm.
More info ...

MIRP-5K

Tearing machine IWMI-5K.
Breaking Machine MIRP-5K (MIRP5K, MIRP-5-K, MIRP 5K, MIRP 5 K)
It is designed for static testing of samples of plastics and rubber in tension at normal temperature;
Maximum limit load - 5kN;
Measurement error in the load range of measurement - 1%;
Measurement error in moving the measuring range - 1%.

More info ...

MR-100

Breaking Machine MP-100.
Breaking Machine MR-100 (MR100, MR 100)
It is designed to test for the normal temperature of standard samples of metals;
Maximum limit load - 100kN;
Accuracy - ± 1%.

More info ...

MR-200

Breaking Machine MP-200.
Breaking Machine MR-200 (MR200, MR 200)
It is designed to test for the normal temperature of standard samples of metals;
Maximum limit load - 200kN;
Accuracy - ± 1%.

More info ...

MR-500

Breaking Machine MP-500.
Breaking Machine MR-500 (MR500, MR 500)
Designed for testing at the normal temperature of standard samples of metals, reinforcing steel, welded joints;
Maximum limit load - 500kN;
Accuracy - ± 1%.

More info ...

MUP-100

Tearing machine CBM-100.
Breaking Machine MUP-100 (MUP100, MUP 100)
It is designed for static testing of materials in tension, compression, bend, bend;
Maximum limit load - 100000kgs;
Accuracy - ± 1%.

More info ...

R-0,5

Breaking machine P-0, 5.
Breaking Machine R-0,5 (R0,5, R 0,5)
Designed for testing of samples of wire, metal belts, rubber, plastics, rubber and textile yarn tensile and compressive test, the laboratory-type facilities;
Maximum limit load - 500kgs;
Accuracy - ± 1%.

More info ...

R-10

Breaking machine P-10.
Breaking Machine R-10 (R10, R 10)
It is designed to test metal samples and structural elements static tensile loads;
Maximum limit load - 10kN;
Accuracy - ± 1%.

More info ...

R-100

Testing machine R-100.
Testing machine R-100 (R100, R 100, p-100, p100, p 100)
Designed for static testing of standard samples of metals in tension at 20 º C ± 15 º C;
The highest load limit - 1000kN;
Measuring ranges of loads:
- 40kN, 200kN - Graduation 0.4 kN;
- 100kN, 500kN - Graduation 1.0 kN;
- 2000kN, 1000kN - Graduation 2.0 kN.
More info ...

R-20

Breaking machine P-20.
Breaking Machine R-20 (R20, R 20)
It is designed to test metal samples and structural elements static tensile loads;
Maximum limit load - 20kN;
Accuracy - ± 1%.

More info ...

R-5

Breaking machine P-5.
Breaking Machine R-5 (R5, R 5)
Designed for testing of samples of wire, metal belts, rubber, plastics, rubber and textile yarn tensile and compressive test, the laboratory-type facilities;
Maximum limit load - 50kN;
Accuracy - ± 1%.

More info ...

R-50

Breaking machine P-50.
Breaking Machine R-50 (R50, R 50)
It is designed to test metal samples and structural elements, alloys, and products from them;
Maximum limit load - 50kN;
Accuracy - ± 1%.

More info ...

RM-25M

    Tearing machine RM-25M (25M RM; RM25M, PM-25, M, RM-25-M, RM 25, M, 25, RM-M; pm-25m; pm 25m; pm25m; pm-25 m; pm-25-m ; pm 25 m; pm 25-m)
    Tearing machine RM-25M - small-sized hydraulic device for static testing of samples of welded joints in tension and bending.
    The highest rated load in a tensile test - 250kN.
    The highest rated load by the bending test - 250kN.
    Types of test specimens according to GOST 6996 - XII; XIII; XV; XXVI; XXVII; XXVIII.
More info ...

RM-50

Tearing machine RM-50.
Breaking Machine RM-50 (RM50, RM 50)
It is designed for static testing of samples of welded joints with thickness 2mm-25mm in tension, bending;
Maximum limit load - 500kN;
Accuracy - ± 1%.

More info ...

RMU-0,05

Breaking Machine RMU-0,05 (RMU0,05, RMU 0,05)
Designed for testing of thin wire and metal strip in tension;
Maximum limit load - 500N;
Accuracy - ± 1%.

More info ...

RMU-0,05-1

Breaking Machine RMU-0,05-1 (RMU0,05-1, RMU 0,05-1)
It is designed to test a thin wire and metal strip in tension;
Maximum limit load - 500N;
Accuracy - ± 1%.

More info ...

RT-250M

Breaking Machine RT-250M.
Breaking Machine RT-250M (RT250M, RT 250M)
Designed for testing textiles of natural and synthetic fibers in tension;
Maximum limit load - 2.5 kN;
Accuracy - ± 1%.

More info ...

UMM-10

Tearing machine PMR-10.
Tearing machine UMM-10 (UMM10, UMM 10)
It is designed for static testing of materials in tension, compression, bend, bend;
Maximum limit load - 10kN;
Accuracy - ± 1%.

More info ...

UMM-100

Tearing machine UMM-100.


More info ...

UMM-20

Tearing machine PMR-20.
Tearing machine UMM-20 (UMM20, UMM 20)
It is designed for static testing of materials in tension, compression, bend, bend;
Maximum limit load - 20kN;
Accuracy - ± 1%.

More info ...

UMM-200

Tearing machine UMM-200.
Tearing machine UMM-200 (UMM200, UMM 200)
It is designed for static testing of materials in tension, compression, bend, bend;
Maximum limit load - 200kN;
Accuracy - ± 1%.

More info ...

UMM-5

Tearing machine UMM-5.
Tearing machine UMM-5 (UMM5, UMM 5)
It is designed for static testing of materials in tension, compression, bend, bend;
Maximum limit load - 5kN;
Accuracy - ± 1%.

More info ...

UMM-50

Tearing machine PMR-50.
Tearing machine UMM-50 (UMM50, UMM 50)
It is designed for static testing of materials in tension, compression, bend, bend;
Maximum limit load - 50kN;
Accuracy - ± 1%.

More info ...
ИР 5081-10ИР 5081-5ИР 5081-2
ИР 5081-1ИР 5081-0,5ИР 5081-0,1
2038 R-0,052054 R-52055 R-0,5
2161 R-52166 R-52167 R-50
I1090MI1140MI1147M
I1185MI4301MIP 5158-0.1
IP 5158-0.5IP 5158-1.0IP 5158-2.5
IR 5040-5-01IR 5040-5-02IR 5040-5-03
IR 5040-5-10IR 5040-5-11IR 5040-5-12
IR 5047-50-01IR 5047-50-02IR 5047-50-10
IR 5047-50-11IR 5060-0,05IR 5061-0,05
IR 5062-0,5IR 5074-3IR 5113-100-10
IR 5113-100-11IR 5113-500-10IR 5113-500-11
IR 5113-500-12IR 5143-200-10IR 5143-200-11
IR 5143-500-10IR 5143-500-11IR 5143-500-12
IR 5145-500-10IR 5145-500-11IR 5145-500-12
IR-100IR-100.1IR-200
IR-200.1IR-500.1IR6053-100.0
IR6054-200.0IR6055-500.0IR6055-500.0
MIR-1000KMIR-100KMIR-2000K
MIR-200KMIR-500KMIRI-1000K
MIRI-100KMIRI-2000KMIRI-200K
MIRI-500KMIRIV-50KMIRK-500K
MIRP-5KMR-100MR-200
MR-500MUP-100R-0,5
R-10R-100R-20
R-5R-50RM-25M
RM-50RMU-0,05RMU-0,05-1
RT-250MUMM-10UMM-100
UMM-20UMM-200UMM-5
UMM-50  


Яндекс цитирования