Aviation equipment and ship equipment >> shipborne automatic >> annunciators, sensors

DBKPTM

DBKPTM sensor. Appearance.
    DBKPTM end position sensors, proximity thermo modernized used to provide an electrical signal to the relay position sensor when the end positions by executive bodies and mechanisms of reinforcement.
    Modifications - DBKPTM-2a, DBKPTM-2b, DBKPTM-3a, DBKPTM-3v.
    Basic error - 3%.

More info ...

DBKPTM-2a

DBKPTM-2a sensor. Appearance.
    DBKPTM-2a proximity sensors end position, thermo modernizedused to provide an electrical signal to the relay position sensor when the end positions by executive bodies and mechanisms of reinforcement.
    Basic error - 3%.

More info ...

DBKPTM-2b

DBKPTM-2b sensor. Appearance.
    DBKPTM-2b end position sensors are used to provide an electrical signal to the relay position sensor when the end positions by executive bodies and mechanisms of reinforcement.
    Basic error - 3%.

More info ...

DBKPTM-3a

DBKPTM-3a sensor. Appearance.
    DBKPTM-3a position sensors are used to provide an electrical signal to the relay position sensor when the end positions by executive bodies and mechanisms of reinforcement.
    Basic error - 3%.

More info ...

DBKPTM-3v

DBKPTM-3v sensor. Appearance.
    DBKPTM-3v position sensors are used to provide an electrical signal to the relay position sensor when the end positions by executive bodies and mechanisms of reinforcement.
    Basic error - 3%.

More info ...

DBPTM

DBPTM sensor. Appearance.
    DBPTM contactless position sensor resistant modernized used to give an electrical signal when the executive bodies of the valves or mechanisms specified provisions.
    Modifications - DBPTM-1, DBPTM-2, DBPTM-3.
    Output Voltage - 4.2 V to 9.4 In.

More info ...

DBPTM-1

DBPTM-1 sensor. Appearance.
    DBPTM-1 non-contact position sensor resistant modernized used to give an electrical signal when the executive bodies of the valves or mechanisms specified provisions.
    Number of control provisions - 1.
    Switching points - 2.5 mm, 4.5 mm.

More info ...

DBPTM-2

DBPTM-2 sensor. Appearance.
    DBPTM-2 contactless position KSR resistant modernized used to output an electric signal when the executive bodies of the valves or mechanisms specified provisions.
    Output Voltage - 8.4 V to 9.4 V.

More info ...

DBPTM-3

DBPTM-3 sensor. Appearance.
    DBPTM-3 contactless position sensor resistant modernized used to give an electrical signal when the executive bodies of the valves or mechanisms specified provisions.
    Number of control provisions - 3.
    Pressure point - 2 mm on either side of the reference position.

More info ...

DDM

7 300 RUB   |   1 940 UAH
DDM sensor. Appearance.
    DDM pressure sensor is used to issue an upgraded electrical signal when a predetermined pressure value.
    Measurement range of pressures - from 3.92 kPa to 39.2 MPa.
    Basic error - 3% of range.

More info ...

ДСВ-21

available: 2 pieces

ДСВ-21 датчик солемера проточный предназначен для контроля солесодержащих водных растворов и преобразования величины содержания соли в растворе в электрическое сопротивление, по величине которого можно судить о значении содержания соли в растворе.

Температура контролируемого раствора - от +20° С до +100° С.

Основная погрешность - ±6.


More info ...

SKPK

SKPK position indicators. Appearance.
    SKPK position indicators contact are used for switching electrical circuits when the executive bodies of the mechanisms and reinforcement of one of the two end positions.
    Modifications - SKPK-2, SKPK-3.
    Constant voltage - 27 ± 4.
    AC - from 1.2 mA to 6 mA (resistive load).
    AC voltage - up to 220.

More info ...

SKPK-2

SKPK-2 position indicators. Appearance.
    SKPK-2 limit switch contact is used for switching electric circuits when the executive bodies and mechanisms of reinforcement of one of the two end positions.
    Number of control provisions - 2.
    Original stem position - extended.
    Working stroke - 5 ± 0,8 mm.
    Force along the axis of the rod - 26 kG.

More info ...

SKPK-3

SKPK-3 position indicators. Appearance.
    SKPK-3 limit switches contact are used for switching electrical circuits when the executive bodies of the mechanisms and reinforcement of one of the two end positions.
    Number of control provisions - 3.
    Original stem position - neutral.
    Working stroke - 2,5 ± 0,4 mm on each side of neutral.
    Force along the axis of the rod - 18 kG.

More info ...

SKPU-D

SKPU-D position indicators. Appearance.
    SKPU-D position indicator is used to switch external circuits.
    Modifications - SKPU-D2a, SKPU-D2-Ra, SKPU-D2-R1a, SKPU-D2b, SKPU-D2-Rb, SKPU-D2-R1b, SKPU-D3b, SKPU-D3-Rb, SKPU-D3-R1b, SKPU-D3v, SKPU-D3-Rv, SKPU-D3-R1v.
    DC voltage - 15 V to 30 V.
    Power DC - 2 A.
    AC Voltage - 15 V to 220 V.
    AC Power - 0.6 A.
    The frequency of the AC - 50 Hz to 400 Hz.

More info ...

SKPU-D2-R1a

SKPU-D2-R1a position indicators. Appearance.
    SKPU-D2-P1a position indicator is used to switch external circuits.
    Number of control provisions - 2.
    Working stroke - from 3.5 mm to 5.1 mm.
    Force along the axis of the rod - not more than 92 N (9 kg).
    Termination rod - thread M6-6g.

More info ...

SKPU-D2-R1b

SKPU-D2-R1b position indicators. Appearance.
    SKPU-D2-R1b position indicator is used to switch external circuits.
    Number of control provisions - 2.
    Working stroke - from 3.5 mm to 5.1 mm.
    Force along the axis of the rod - not more than 92 N (9 kg).
    Termination rod - ball Æ 4 mm.

More info ...

SKPU-D2-Ra

SKPU-D2-Ra position indicators. Appearance.
    SKPU-D2-Ra position indicator is used to switch external circuits.
    Number of control provisions - 2.
    Working stroke - from 3.5 mm to 5.1 mm.
    Force along the axis of the rod - not more than 92 N (9 kg).
    Termination rod - thread M6-6g.

More info ...

SKPU-D2-Rb

SKPU-D2-Rb position indicators. Appearance.
    SKPU-D2-Rb position indicator is used to switch external circuits.
    Number of control provisions - 2.
    Working stroke - from 3.5 mm to 5.1 mm.
    Force along the axis of the rod - not more than 92 N (9 kg).
    Termination rod - ball Æ 4 mm.

More info ...

SKPU-D2a

SKPU-D2a position indicators. Appearance.
    SKPU-D2a position indicator is used to switch external circuits.
    Number of control provisions - 2.
    Working stroke - from 3.5 mm to 5.1 mm.
    Force along the axis of the rod - not more than 92 N (9 kg).
    Termination rod - thread M6-6g.

More info ...

SKPU-D2b

SKPU-D2b position indicators. Appearance.
    SKPU-D2b position indicator is used to switch external circuits.
    Number of control provisions - 2.
    Working stroke - from 3.5 mm to 5.1 mm.
    Force along the axis of the rod - not more than 92 N (9 kg).
    Termination rod - ball Æ 4 mm.

More info ...

SKPU-D3-R1b

SKPU-D3-R1b position indicators. Appearance.
    SKPU-D3-R1b position indicator is used to switch external circuits.
    Number of control provisions - 3.
    Working stroke - from 3.6 mm to 5.2 mm in both directions from the starting position.
    Force along the axis of the rod - not more than 51 N (5 kg).
    Termination rod - ball Æ 4 mm.

More info ...

СКПУ-Д3-Р1в

СКПУ-Д3-Р1в сигнализатор положения используется для переключения внешних электрических цепей.

Напряжение постоянного тока - от 15 В до 30 В.

Сила постоянного тока - до 2 А.

Рабочий ход штока - от 3,6 мм до 5,2 мм в обе стороны от исходного положения.

Усилие вдоль оси штока - не более 51 Н (5 кГс).


More info ...

SKPU-D3-Rb

SKPU-D3-Rb position indicators. Appearance.
    SKPU-D3-Rb position indicator is used to switch external circuits.
    Number of control provisions - 3.
    Working stroke - from 3.6 mm to 5.2 mm in both directions from the starting position.
    Force along the axis of the rod - not more than 51 N (5 kg).
    Termination rod - ball Æ 4 mm.

More info ...

СКПУ-Д3-Рв

СКПУ-Д3-Рв сигнализатор положения используется для переключения внешних электрических цепей.

Напряжение постоянного тока - от 15 В до 30 В.

Сила постоянного тока - до 2 А.

Рабочий ход штока - от 3,6 мм до 5,2 мм в обе стороны от исходного положения.

Усилие вдоль оси штока - не более 51 Н (5 кГс).


More info ...

SKPU-D3b

SKPU-D3b position indicators. Appearance.
    SKPU-D3b position indicator is used to switch external circuits.
    Number of control provisions - 3.
    Working stroke - from 3.6 mm to 5.2 mm in both directions from the starting position.
    Force along the axis of the rod - not more than 51 N (5 kg).
    Termination rod - ball Æ 4 mm.

More info ...

СКПУ-Д3в

СКПУ-Д3в сигнализатор положения используется для переключения внешних электрических цепей.

Напряжение постоянного тока - от 15 В до 30 В.

Сила постоянного тока - до 2 А.

Рабочий ход штока - от 3,6 мм до 5,2 мм в обе стороны от исходного положения.

Усилие вдоль оси штока - не более 51 Н (5 кГс).


More info ...

SPKVM

SPKVM position indicators. Appearance.
    SPKVM position indicators in contact water mud protected performance are used to switch your contacts electric circuits when the preset positions and executive bodies of the reinforcement mechanisms.
    Modifications - SPKVM-1, SPKVM-2, SPKVM-3a, SPKVM-3v.
    Voltage - from 3 to 36.
    Current - 0.001 A to 0.5 A.

More info ...

SPKVM-1

SPKVM-1 position indicators. Appearance.

SPKVM-1 position indicators in contact water mud protected performance are used to switch your contacts electric circuits when the preset positions and executive bodies of the reinforcement mechanisms.

Number of control provisions - 2.

Working stroke - 5.5 mm.

Force along the axis of the rod - 98 N (10 kgf).

Termination rod - ball Æ 4 mm.


More info ...

SPKVM-2

SPKVM-2 position indicators. Appearance.

SPKVM-2 position indicators in contact water mud protected performance are used to switch your contacts electric circuits when the preset positions and executive bodies of the reinforcement mechanisms.

Number of control provisions - 2.

Working stroke - 4 ± 0,6 mm.

Force along the axis of the rod - 137 N (14 kgf).

Termination rod - ball Æ 4 mm.


More info ...

SPKVM-3a

SPKVM-3a position indicators. Appearance.

SPKVM-3a position indicators in contact water mud protected performance are used to switch your contacts electric circuits when the preset positions and executive bodies of the reinforcement mechanisms.

Number of control provisions - 3.

Working stroke - 4 ± 0,6 mm.

Force along the axis of the rod - 59 N (6 kgf).

Termination rod - thread M6-6d.


More info ...

SPKVM-3v

SPKVM-3v position indicators. Appearance.

SPKVM-3v position indicators in contact water mud protected performance are used to switch your contacts electric circuits when the preset positions and executive bodies of the reinforcement mechanisms.

Number of control provisions - 3.

Working stroke - 4 ± 0,6 mm.

Force along the axis of the rod - 59 N (6 kgf).

Termination stock - freely rotating earring.


More info ...

SPKGM

SPKGM switch is used to signal the end positions mechanisms ventilation valves, fittings, devices, automatic control systems.
DC voltage - 3 V to 30 V.
Power DC - up to 2 A.
AC Voltage - 15 V to 220 V.
AC power - up to 1 A.
The frequency of the AC - 50 Hz to 400 Hz.


More info ...

SPKM

available: 7 pieces
SPKM device sensor.

SPKM position indicator is used to switch external circuits.
Modifications - SPKM-1, SPKM-2, SPKM-3, SPKM-3a, SPKM-3b, SPKM-3b1.
DC voltage - 3 V to 30 V.
Power DC - up to 2 A.
AC Voltage - 15 V to 220 V.
AC Power - up to 1 A.
The frequency of the AC - 50 Hz to 400 Hz.


More info ...

SPKM-1

SPKM-1 position indicators. Appearance.

SPKM-1 position indicator is used to switch external circuits.
Number of control provisions - 2.
Working stroke - 2±0,25 mm.
The force along the axis of the rod - from 34 N to 88,5 N (3,5 kgf to 9 kgf).
Okontsevanie rod - ball Æ 4 mm.


More info ...

SPKM-2

available: 7 pieces
SPKM-2 device sensor.

SPKM-2 position indicator is used to switch external circuits.
Number of control provisions - 2.
Working stroke - 4±0,25 mm.
Force along the axis of the rod - from 24,5 N to 137 N (2,5 kgf to 14 kgf).
Okontsevanie rod - ball Æ 4 mm.


More info ...

SPKM-3

SPKM-3 position indicators. Appearance.

SPKM-3 position switch is used to switch external circuits.
Number of control provisions - 3.
Working stroke - 2±0,25 mm in both directions from the starting position.
The force along the axis of the rod - from 34 N to 88,5 N (3,5 kgf to 9 kgf).


More info ...

SPKM-3a

SPKM-3a position indicators. Appearance.

SPKM-3a position indicator is used to switch external circuits.
Number of control provisions - 3.
Working stroke - 2±0,25 mm in both directions from the starting position.
Force along the axis of the rod - no more than 88,5 N (9 kgs).
Okontsevanie rod - thread M6-6d.


More info ...

SPKM-3b

SPKM-3b position indicators. Appearance.

SPKM-3b position indicator is used to switch external circuits.
Number of control provisions - 3.
Working stroke - 2±0,25 mm in both directions from the starting position.
Force along the axis of the rod - no more than 88,5 N (9 kgs).
Okontsevanie stock - freely rotating earring.


More info ...

SPKM-3b1

SPKM-3b1 position indicators. Appearance.

SPKM-3b1 position indicator is used to switch external circuits.
Number of control provisions - 3.
Working stroke - 2±0,25 mm in both directions from the starting position.
Force along the axis of the rod - no more than 88,5 N (9 kgs).
Okontsevanie stock - freely rotating earring.


More info ...

SPKTM

SPKTM position indicators contact in the heat-resistant versions are used to switch your contacts electric circuits when the preset positions and executive bodies of the reinforcement mechanisms.

Modifications - SPKTM-1, SPKTM-2, SPKTM-3a, SPKTM-3v.

Voltage - from 3 to 36.

Current - 0.001 A to 0.25 A.


More info ...

SPKTM-3a

SPKTM-3a position indicators are used to switch your contacts electric circuits when the preset positions and executive bodies of the reinforcement mechanisms.

Number of control provisions - 3.

Working stroke - 4 ± 0,6 mm.

Force along the axis of the rod - 59 N (6 kgf).

Termination rod - thread M6-6d.


More info ...

SPKTM-3v

SPKTM-3v position indicators in contact heat-resistant versions are used to switch your contacts external electrical circuits when the preset positions and executive bodies of the reinforcement mechanisms.

Number of control provisions - 3.

Working stroke - 4 ± 0,6 mm.

Force along the axis of the rod - 59 N (6 kgf).

Termination stock - freely rotating earring.


More info ...

SPKUM-D

SPKUM-D position indicators. Appearance.

SPKUM-D position indicator is used to switch external circuits.

Modifications - SPKUM-D3a, SPKUM-D3a-R, SPKUM-D3a-R1, SPKUM-D3v, SPKUM-D3v-R, SPKUM-D3v-R1.

DC voltage - 15 V to 30 V.

Power DC - up to 2 A.

AC Voltage - 15 V to 220 V.

AC Power - 0.5 A.

The frequency of the AC - 50 Hz to 400 Hz.


More info ...

SPKUM-D3a

SPKUM-D3a position indicators. Appearance.

SPKUM-D3a position indicator is used to switch external circuits.

Original stem position - neutral.

Working stroke - 4 ± 1 mm.

Force along the axis of the rod - no more than 45.9 N (4.5 kgf).

Termination rod - thread M6-6g.


More info ...

SPKUM-D3a-R

SPKUM-D3a-R position indicators. Appearance.

SPKUM-D3a-R position indicator is used to switch external circuits.

Original stem position - neutral.

Working stroke - 4 ± 1 mm.

Force along the axis of the rod - no more than 45.9 N (4.5 kgf).

Termination rod - thread M6-6g.


More info ...

SPKUM-D3a-R1

SPKUM-D3a-R1 position indicators. Appearance.

SPKUM-D3a-R1 position switch is used to switch external circuits.

Original stem position - neutral.

Working stroke - 4 ± 1 mm.

Force along the axis of the rod - no more than 45.9 N (4.5 kgf).

Termination rod - thread M6-6g.


More info ...

SPKUM-D3v

SPKUM-D3v position indicators. Appearance.

SPKUM-D3v position indicator is used to switch external circuits.

Original stem position - neutral.

Working stroke - 4 ± 1 mm.

Force along the axis of the rod - no more than 45.9 N (4.5 kgf).

Termination stock - earring.


More info ...

SPKUM-D3v-R

SPKUM-D3v-R position indicators. Appearance.

SPKUM-D3v-R with ignalizator position is used to switch external circuits.

Original stem position - neutral.

Working stroke - 4 ± 1 mm.

Force along the axis of the rod - no more than 45.9 N (4.5 kgf).

Termination stock - earring.


More info ...

SPKUM-D3v-R1

SPKUM-D3v-R1 position indicators. Appearance.

SPKUM-D3v-R1 position switch is used to switch external circuits.

Original stem position - neutral.

Working stroke - 4 ± 1 mm.

Force along the axis of the rod - no more than 45.9 N (4.5 kgf).

Termination stock - earring.


More info ...
ДСВ-21СКПУ-Д3-РвСКПУ-Д3в
СКПУ-Д3-Р1вDBKPTMDBKPTM-2a
DBKPTM-2bDBKPTM-3aDBKPTM-3v
DBPTMDBPTM-1DBPTM-2
DBPTM-3DDMSKPK
SKPK-2SKPK-3SKPU-D
SKPU-D2-R1aSKPU-D2-R1bSKPU-D2-Ra
SKPU-D2-RbSKPU-D2aSKPU-D2b
SKPU-D3-R1bSKPU-D3-RbSKPU-D3b
SPKGMSPKMSPKM-1
SPKM-2SPKM-3SPKM-3a
SPKM-3bSPKM-3b1SPKTM
SPKTM-3aSPKTM-3vSPKUM-D
SPKUM-D3aSPKUM-D3a-RSPKUM-D3a-R1
SPKUM-D3vSPKUM-D3v-RSPKUM-D3v-R1
SPKVMSPKVM-1SPKVM-2
SPKVM-3aSPKVM-3v 


Яндекс цитирования