Control and measuring devices >> power supply units and charge

BPZ-401

10 202 RUB
7 935 UAH
available:
7 pieces

Online prices include VAT.

For order is possible effectively delivery of any quantity.
Power supply and charging BPZ-401 (BPZ401, BPZ 401)
 
Power supply and charging BPZ-401 is designed to supply rectified current automation devices, controls and protective relaying, performed at the rated voltage of 110V or 220V or charge capacitor banks (blocks BK-400 and others) charge voltage 400V.
 
Technical characteristics of the instrument power supply and charge BPZ-401:
 
The device has an output power of 100W to 200W continuous duty and in short mode;
Power supply and charging BPZ-401 included in the voltage measuring transformers or circuit auxiliary transformers;
A Working temperature of ambient air - from - 40 ° C to +40 ° C;
In ibratsionnye load - with a maximum acceleration of 0,25 g in the frequency range from 5Hz to 100Hz;
On the Degree of enclosure protection blocks and outputs - IP00;
N Nominal Input Voltage - 100V, 105V, 110V, 115V, 121V, 127V, 200V, 210V, 220V, 230V, 242V, 254V;
N Nominal output voltage of the power supply unit and a charge BPZ-401 - 110V, 220V;
N Nominal frequency - 50Hz, 60Hz;
N apryazhenie charge - 400V;
The burden of the charge in the capacitors 200mkF - no more than 70ms;
Output voltage power supply unit and a charge BPZ-401 no-load and the minimum permissible load impedance at the output shown in Table 1;
 
Table 1 The values ​​of the output voltage power supply unit and a charge BPZ-401 no-load and the minimum permissible load impedance at the output
Load resistance, Ohm
Setting of output voltage, V
Output voltage (c)
50
110V
not less than 95V
¥
not less than 130V
200
220
not less than 190V
:
not less than 160V
 
In long mode power supply unit and a charge BPZ-401 can withstand 110% of rated input voltage for long-term allowable load resistance:
- At setpoint output voltage 110V - 150V;
- At setpoint output voltage 220V - 600V;
Maximum capacity of charged capacitors - 2000mkF;
The instrument power supply and charge BPZ-401 relay control circuit serviceability of charge;
Voltage relay control no more than 70% of rated input to the output voltage set point 220;
Breaking capacity relay NC contact - not less than 30 W at a voltage of 24V to 250V with a current or 1A;
Consumed by the device power supply and charge BPZ-401 Power:
- Using the unit of charge - no more than 20V ∙ A;
- Mode power supply with no load on the output voltage setpoint 110V - no more than 5 V ∙ A;
- Mode power supply with no load on the output voltage set point 220 - less than 20 V ∙ A;
- At maximum load for a long time - no more than 200V ∙ A;
- At maximum load - no more than 400 ∙ A;
Weight - not more than 9 kg;
The manufacturer guarantees the quality of the instrument power supply and charge BPZ-401 technical requirements specifications subject to user terms and conditions of storage, transportation, installation, operation, established specifications and operational documentation.

Photos BPZ-401

BPZ-401 device image.
BPZ-401 device image.
BPZ-401 front view.
BPZ-401 front view.
BPZ-401 side view.
BPZ-401 side view.
BPZ-401 rear view.
BPZ-401 rear view.
BPZ-401 side view.
BPZ-401 side view.
BPZ-401 overhead view.
BPZ-401 overhead view.


Яндекс цитирования