Equipment for maintenance checkup >> - the list of equipment for vehicle inspection >> equipment for inspection and auto service of the plant "GARO" >> gas analyzers and opacimeters (AVG)
Gas analyzer AVG-4-1.01 is used to measure the volume fraction of carbon monoxide (CO), total hydrocarbons (CH), carbon dioxide (CO2) and oxygen (O 2) in the exhaust gases of vehicles with petrol engines, as well as to measure the speed crankshaft, oil temperature and engine cars for the calculation of the excess air ratio.
Also, this device can be called: AVG4-1.01, AVG 4-1.01, AVG 4 1.01, AVG4 1.01.
Structurally, the gas analyzer in a metal enclosure designed to be mounted on a horizontal surface.
Accuracy class - 1.
Technical characteristics of the gas analyzer:
Measuring range CO - 0-5%.
Measuring range CH - 0-2000 ppm.
The range of measurements of CO 2 - 16%.
Measuring range of O 2 - 21%.
Excess air ratio Parameter - 0-2.
The engine speed - 0-1200/0-6000 rev / min.
The range of monitoring the oil temperature - 20-100 ° C.
Power - 12 V/220 V.
Overall dimensions of the AGB-4-1.01-320 × 170 × 280 mm.
Warm (20 ° C) - no more than 30 minutes.
The power consumed in the measurement mode - no more than 30 · A.
Mean time to failure - at least 10,000 hours
Durability - not less than 10 years.
Weight - not more than 7 kg.
Automatic condensate drain.
Automatic purging zero.
Gas analyzer AVG-4-1.01 consists of a system of sampling and sample preparation, the primary converter, consisting of the measuring unit (BEE) and the electronics (BE).
Sampling and sample preparation system includes a gas analyzer flue gas probe, sampling hose, strainer (fuel filter), fine filter, booster air flow and collection of condensate.
Operating conditions of gas analyzers AVG-4-1.01:
Ambient temperature range - from 0 ° C to 40 ° C.
The range of relative humidity environment at 30 ° C - 95%.
Gas analyzers AVG-4-1.01 can be used at service stations cars and other businesses related to the repair and adjustment of engines in accordance with the established norms of emissions of carbon monoxide, total hydrocarbons, carbon dioxide, oxygen, and nitrogen oxide.
The device is designed for operation in the lines of technical control: measurement results are automatically transmitted to a central computer, which can significantly speed up the process of diagnosis.
Comes with software and cable for connection to a PC.
Scope of supply:
1. Gas analyzer AVG-4-0.01-1 pc.
2. Probe gazozaborny - 1 pc.
3. Filter gasoline - 1 pc.
4. Power cable to the 12 - 1 pc.
5. Power cable for 220 V - 1 pc.
6. Tachometer sensor with cable - 1 pc.
7. Sample probe tube - 1 pc.
8. Oil temperature sensor - 1 pc.
9. Cable connection to a PC - 1 pc.
10. Manual - 1 pc.