Discount 10% on the dynamometers.

Laboratory equipment >> dynamometers and crane scales (ATsDR-, ATsDS-, ATsDU-, VEK, DORM-, DOSM-, DPU-, DRV-, DSP- and others) >> electronic dynamometers (ATsDR-, ATsDS-, ATsDU-, DEUE- and others) >> ACDS

ACDS-2000/3I-1 Dynamometer ATSDS-2000/3I-1 compression electronic.


It is possible effectively delivery of any quantity.
Dynamometer ACDS-2000/3I-1 compression electronic (ACDS2000/3I1, ACDS 2000/3I 1, ACDS-2000/3I1, ACDS2000/3I-1)
Dynamometer ACDS-2000/3I-1 electronic compression is designed to measure the static force of compression.
Apply to the periodic verification siloizmeritelnyh device testing machines and stands, and as working dynamometers in compression.
Technical characteristics of the devices dynamometers ACDS-2000/3I-1 compression electronic:
Below are the technical characteristics of the devices of Class 1 NmPI which defined as 10% of the NPI;
The highest value measured - 2000kN;
Lower limit of measurement - 200.0 kN;
Graduation device electronic dynamometer ACDS-2000/3I-1 compression - 0.2 kN;
- The height of the sensor - no more than 300 mm;
- Cross-section sensor - no more than 170mm;
Time to establish the measurement instrument compression load cell ACDS-2000/3I-1 Electronic - 0.2 seconds;
Limits allowed by the relative magnitude of indications - 0.20%;
Limits of permissible relative hysteresis dynamometer compression device electronic ACDS-2000/3I-1 - ± 0,30%;
Acceptable limit of relative total error - ± 0,24%;
Normal operating conditions the device ACDS-2000/3I-1 compression load cell electronic:
- Ambient temperature - from +10 º C to +35 º C;
- Relative humidity - 40% to 85%;
- Safe Overload - 150%;
- Maximum Overload - 200%;
Class dust-, water-resistance strain gauge load cell device ACDS-2000/3I-1 compression e - IP66;
Cable length - 3 m (standard);
Possible extension cable up to 25 m;
Galvanically isolated interface device electronic dynamometer ACDS-2000/3I-1 compression - RS 232, RS 485;
The relay module (three optorele);
Dynamometers have a scale named in Kn (H), which allows you to instantly determine the value of the measured force;
ACDS-2000/3I-1 compression devices dynamometers allow electronic capture the maximum (peak) value attached increasing or decreasing effort;
Allows the use of high performance dynamometers for measuring continuously evolving efforts;
Electronic dynamometers are a strain gauge, the cabled connection with electronic measuring indicator;
In order to expand the scope of the instrument dynamometer ACDS-2000/3I-1 compression electronic sensors are used several sizes determining the size dynamometer;
Depending on the application, dynamometers silovvodyaschie elements can be performed in many different versions, without affecting the accuracy of the testimony;
Additional instrument options ACDS-2000/3I-1 compression load cell electronic:
- Self-contained power unit;
- Built-in self-contained power unit;
- Wireless electronic test indicator (radio up to 100m);
- Analog output - 4 mA to 20 mA, 0 V to 10 V;
- Aluminum case;
The manufacturer guarantees that the product quality compression load cell ACDS-2000/3I-1 electronic technical requirements specifications provided the customer terms and conditions of storage, transportation, installation, operation, and its specified operational documentation.