Laboratory equipment >> tensile testing machines

2166 R-5 Breaking car 2166 P-5.

2166 R-5

For order is possible effectively delivery of any quantity.
Breaking Machine 2166 R-5 (2166 R5, 2166 R 5)
 
Breaking car 2166 R-5 is designed to test samples of wire, metal belts, rubber, plastics, rubber and textile yarn tensile and compressive test, the laboratory-type facilities.
 
Technical characteristics of the devices bursting machines 2166 R-5:
 
Maximum limit load - 5kN;
Number of force measuring sensor unit tensile machine 2166 R-5 - 3;
Siloizmeritel 50H 1 (Range / Scale) - 0H-50H / 0,001 H;
Siloizmeritel 0.01 H 2 (Range / Scale) - 0H-10H / 0,001 H;
Siloizmeritel 500N 3 (Range / Scale) - 0H-50H / H 0.01;
Siloizmeritel 0.1 N 4 (Range / Scale) - 0H-10H / H 0.01;
Siloizmeritel 5000N 5 (Range / Scale) - 0H-50H / 0,1 N;
Siloizmeritel 1H 6 (Range / Scale) - 0H-10H / 0,1 N;
The limits of acceptable relative error of the instrument siloizmeritelya breaking machine in 2166 R-5 in the direct course:
- 1% of the measured load at loads ranging from 0.2 to the upper limit of each range of measurement;
- 0.2% - on the upper limit of each band with loads of less than 0.2 of the maximum limit of range;
The scope of the instrument readings siloizmeritelya breaking car 2166 R-5 in the range of measurements:
- Less than 2% of the measured load at loads ranging from 0.2 to the upper limit of each range of measurement;
- Not more than 0.4% of the upper limit of each band with loads of less than 0.2 of the maximum limit of range;
Dimensions of the unit tensile machine 2166 R-5 - 840h800h1980mm;
Dimensions of control panel - 600h735h1620mm;
Weight of the device breaking machine in 2166 R-5 - 190kg;
Weight control panel - 250 kg;
The manufacturer guarantees the quality of the unit tensile machine 2166 R-5 technical requirements specifications, subject to the consumer the terms and conditions of storage, transportation, installation, operation, established specifications and operational documentation.


Яндекс цитирования