Laboratory equipment >> hardness gauges for nonmetals

2124 TML Pendulum device for hardness paint coatings TML 2124.

2124 TML

132 986 RUB
34 576 UAH

Online prices include VAT.

For order is possible effectively delivery of any quantity.
Pendulum device for hardness paint coatings 2124 TML (2124TML, 2124-TML)
 
Pendulum device for hardness paint coatings 2124 TML is designed to determine the hardness of coatings.
 
Technical characteristics of the devices for devices pendulum hardness paint coatings 2124 TML:
 
Measurement range of the pendulum - 0-999;
The main technical characteristics of the device for the device pendulum hardness paint coatings TML 2124 are shown in Table 1;
 
Table 1 Main technical characteristics of the device for the device pendulum hardness paint coatings 2124 TML
 
Name of characteristic
A (Konig)
B (Persozu)
Mass of the pendulum
200.0 g ± 0,2 g
500.0 g ± 0,1 g
The average period of oscillation of the pendulum
1.40 ± 0,02 a
1.000 to ± 0,001 with
Diameter bearing balls
5,000 mm ± 0,005 mm
8,000 mm ± 0,005 mm
The distance between the centers of the ball bearing
30 mm ± 0,2 mm
50mm ± 1mm
Distance from the plane to the end of the arrow support
400 mm ± 0,2 mm
400 mm ± 0,2 mm
Distance from the plane of the support to the center of gravity
-
60mm ± 1mm
While reducing the amplitude of fluctuations in the control glass plate measured deviation angles from 6 º to 3 º
250C ± 10s
-
While reducing the amplitude of fluctuations in the control glass plate measured deviation angles of 12 º to 4 º
-
not less than 420s
 
The maximum capacity of the device to the device pendulum hardness paint coatings 2124 TML - 50W;
Power - 220V, 50Hz;
Dimensions of the device unit for the pendulum hardness paint coatings 2124 TML - 295h320h720mm;
Weight - 13 kg;
The operation principle of the device pendulum hardness paint coatings TML 2124. Based on specific characteristics of the paint is selected and the appropriate type of pendulum is set to catch;
Table set for a trial witness plate of polished glass;
Pendulum pendulum appliance device for hardness paint coatings 2124 TML deflected by a certain angle and fixed in this position, then released and performs free damped oscillations on the surface of the control plate;
Since the start of the pendulum starts reading device, which turns off and locks the measured value of the attenuation of free oscillations up to certain limits;
According to the testimony of digital display device to device pendulum hardness paint coatings 2124 CCR is determined by "the number of glass" - the decay time of the pendulum to control the glass plate;
Witness plate is replaced by the test sample, the test of which are similar;
The hardness of the coating sample is determined by comparing the decay time of the pendulum on a sample of the "glass-number";
The manufacturer guarantees that the quality of the device unit for the pendulum hardness paint coatings 2124 TML technical requirements specifications provided the customer terms and conditions of storage, transportation, installation, operation, and its specified operational documentation.


Яндекс цитирования